* initrd question... [not found] <0FPX00FFH0XJV5@pmdf-it.hasler.ascom.ch> @ 2000-02-16 2:42 ` dony 2000-02-16 2:59 ` sungyeon 0 siblings, 1 reply; 3+ messages in thread From: dony @ 2000-02-16 2:42 UTC (permalink / raw) To: Ruedi.Hofer, linuxppc-embed Hello: Now I want to get my initrd running. I use the ramdisk demo "ramdisk.image.gz" under arch/ppc/mbxboot and compile my zvmlinux.initrd. The target boots correctly at the beginning. It decompresses the kernel and runs the kernel and shows the boot messages. When all is done, it begins to mount root filesystem (on Ramdisk), and shows the following messages: RAMDISK:Compressed image found at block 0 VFS:Mounted root (ext2 filesystem) Freeing unused kernel memory:28k init Then nothing happen. At this time it should show the shell prompt. But I don't know why it didn't show. And I couldnot input any character. Cross-compile environment: [binutils-2.9.1.0.19a egcs-1.1.2 glibc-2.1(including crypt, linuxthreads)] I cross-compile my kernel under the above environment. Any suggestions will be highly appreciated. Thank in advance dony ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: initrd question... 2000-02-16 2:42 ` initrd question dony @ 2000-02-16 2:59 ` sungyeon 2000-02-16 3:13 ` dony 0 siblings, 1 reply; 3+ messages in thread From: sungyeon @ 2000-02-16 2:59 UTC (permalink / raw) To: dony, Ruedi.Hofer, linuxppc-embed ----- Original Message ----- From: "dony" <dony.he@huawei•com.cn> To: <Ruedi.Hofer@ascom•ch>; "linuxppc-embed" <linuxppc-embedded@lists•linuxppc.org> Sent: Wednesday, February 16, 2000 11:42 AM Subject: initrd question... > > Hello: > Now I want to get my initrd running. I use the ramdisk demo "ramdisk.image.gz" under > arch/ppc/mbxboot and compile my zvmlinux.initrd. > The target boots correctly at the beginning. It decompresses the kernel and runs the kernel and > shows the boot messages. When all is done, it begins to mount root filesystem (on Ramdisk), and shows > the following messages: > RAMDISK:Compressed image found at block 0 > VFS:Mounted root (ext2 filesystem) > Freeing unused kernel memory:28k init > Then nothing happen. If your root file system is nfs, and disable BOOTP kernel option then nothing happen. like you. I'v changed root file system from NFS to RAMdisk. and disabled BOOTP. > At this time it should show the shell prompt. But I don't know why it didn't show. And I couldnot input > any character. > Cross-compile environment: > [binutils-2.9.1.0.19a egcs-1.1.2 glibc-2.1(including crypt, linuxthreads)] > I cross-compile my kernel under the above environment. > Any suggestions will be highly appreciated. > Thank in advance > dony > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: initrd question... 2000-02-16 2:59 ` sungyeon @ 2000-02-16 3:13 ` dony 0 siblings, 0 replies; 3+ messages in thread From: dony @ 2000-02-16 3:13 UTC (permalink / raw) To: sungyeon; +Cc: Ruedi.Hofer, linuxppc-embed sungyeon wrote: > ----- Original Message ----- > From: "dony" <dony.he@huawei•com.cn> > To: <Ruedi.Hofer@ascom•ch>; "linuxppc-embed" > <linuxppc-embedded@lists•linuxppc.org> > Sent: Wednesday, February 16, 2000 11:42 AM > Subject: initrd question... > > > > > Hello: > > Now I want to get my initrd running. I use the ramdisk demo > "ramdisk.image.gz" under > > arch/ppc/mbxboot and compile my zvmlinux.initrd. > > The target boots correctly at the beginning. It decompresses the > kernel and runs the kernel and > > shows the boot messages. When all is done, it begins to mount root > filesystem (on Ramdisk), and shows > > the following messages: > > RAMDISK:Compressed image found at block 0 > > VFS:Mounted root (ext2 filesystem) > > Freeing unused kernel memory:28k init > > Then nothing happen. > > If your root file system is nfs, and disable BOOTP kernel option > then nothing happen. like you. > > I'v changed root file system from NFS to RAMdisk. and disabled BOOTP. Yes, I have also done this. But the problem still exists. why? > > > > At this time it should show the shell prompt. But I don't know why it > didn't show. And I couldnot input > > any character. > > Cross-compile environment: > > [binutils-2.9.1.0.19a egcs-1.1.2 glibc-2.1(including > crypt, linuxthreads)] > > I cross-compile my kernel under the above environment. > > Any suggestions will be highly appreciated. > > Thank in advance > > dony > > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2000-02-16 3:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <0FPX00FFH0XJV5@pmdf-it.hasler.ascom.ch>
2000-02-16 2:42 ` initrd question dony
2000-02-16 2:59 ` sungyeon
2000-02-16 3:13 ` dony
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox