From: Dan Malek <dan@mvista•com>
To: paulus@linuxcare•com.au
Cc: Benjamin Herrenschmidt <bh40@calva•net>,
Linux/PPC Development <linuxppc-dev@lists•linuxppc.org>
Subject: Re: __ioremap_at() in 2.4.0-test9-pre2
Date: Fri, 29 Sep 2000 00:22:50 -0400 [thread overview]
Message-ID: <39D4191A.5C8DE9F0@mvista.com> (raw)
In-Reply-To: 14803.60860.762026.661989@argo.linuxcare.com.au
Paul Mackerras wrote:
> I don't see why it matters on powermacs which is the primary bridge
> though, since we fortunately don't have any legacy ISA devices.
> Hum... except for cards in the PC-card slot... So we need to make
> sure that the bus with the cardbus controller is behind the "primary"
> bridge.
I thought this whole discussion was started because someone wanted
a 16550-like serial card on the PCI bus....
Isn't the cardbus only on the PowerBook/iBook, which only have one
PCI bus? Of course, this will change with the new G4 PowerBooks....
> The issue here is that the pcmcia/cardbus stuff will assign a range
> of I/O addresses to a pcmcia card (starting at say I/O port n) and
> then expect that inb(n) will access the card.
That should work, and most of the modules have 'ioport=' configuration
option in any case....
-- Dan
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2000-09-29 4:22 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-09-17 18:59 __ioremap_at() in 2.4.0-test9-pre2 Geert Uytterhoeven
2000-09-19 3:59 ` Paul Mackerras
2000-09-19 5:56 ` Michel Lanners
2000-09-19 14:28 ` Dan Malek
2000-09-19 18:31 ` Roman Zippel
2000-09-19 20:09 ` Dan Malek
2000-09-19 23:42 ` Roman Zippel
2000-09-20 0:10 ` Dan Malek
2000-09-20 17:18 ` Roman Zippel
2000-09-20 18:11 ` Dan Malek
2000-09-20 20:22 ` Roman Zippel
2000-09-20 20:41 ` David Edelsohn
2000-09-21 2:16 ` Dan Malek
2000-09-21 2:26 ` David Edelsohn
2000-09-21 2:40 ` Dan Malek
2000-09-21 3:53 ` David Edelsohn
2000-09-19 22:06 ` Matt Porter
2000-09-19 22:58 ` Paul Mackerras
2000-09-20 6:12 ` Matt Porter
2000-09-20 12:15 ` Geert Uytterhoeven
2000-09-20 23:08 ` Paul Mackerras
2000-09-21 20:12 ` Matt Porter
2000-09-20 8:34 ` Roman Zippel
2000-09-20 22:54 ` Paul Mackerras
2000-09-20 15:56 ` Dan Malek
2000-09-20 23:22 ` Paul Mackerras
2000-09-21 2:13 ` Dan Malek
2000-09-21 2:35 ` Paul Mackerras
2000-09-21 3:57 ` Dan Malek
2000-09-21 5:06 ` Paul Mackerras
2000-09-21 6:51 ` Dan Malek
2000-09-21 14:03 ` Geert Uytterhoeven
2000-09-21 22:40 ` Benjamin Herrenschmidt
2000-09-22 3:53 ` Dan Malek
2000-09-22 11:58 ` Geert Uytterhoeven
2000-09-22 18:46 ` Dan Malek
2000-09-22 20:06 ` Frank Rowand
2000-09-23 21:38 ` Matt Porter
2000-09-21 20:22 ` Matt Porter
2000-09-22 3:49 ` Paul Mackerras
2000-09-22 4:16 ` Dan Malek
2000-09-23 12:34 ` Geert Uytterhoeven
2000-09-27 10:37 ` Benjamin Herrenschmidt
2000-09-28 9:59 ` Geert Uytterhoeven
2000-09-28 19:19 ` Benjamin Herrenschmidt
2000-09-28 23:33 ` Benjamin Herrenschmidt
2000-09-29 5:08 ` Dan Malek
2000-09-29 11:37 ` Geert Uytterhoeven
2000-09-29 17:12 ` Kostas Gewrgiou
2000-09-29 17:18 ` Benjamin Herrenschmidt
2000-09-29 21:35 ` Michel Lanners
2000-09-30 0:11 ` Matt Porter
2000-09-29 0:22 ` Paul Mackerras
2000-09-29 0:40 ` Benjamin Herrenschmidt
2000-09-29 1:17 ` Paul Mackerras
2000-09-29 4:22 ` Dan Malek [this message]
2000-09-29 4:29 ` Dan Malek
2000-09-29 4:36 ` Paul Mackerras
2000-09-29 5:40 ` Dan Malek
2000-09-29 19:07 ` Frank Rowand
2000-09-30 1:39 ` Paul Mackerras
2000-09-30 22:50 ` Frank Rowand
2000-10-01 1:09 ` Dan Malek
2000-10-01 8:16 ` Paul Mackerras
2000-10-01 21:30 ` Dan Malek
2000-10-01 22:50 ` Paul Mackerras
2000-10-02 9:04 ` Dan Malek
2000-09-28 23:24 ` Frank Rowand
2000-09-21 13:44 ` Geert Uytterhoeven
2000-09-21 22:41 ` Benjamin Herrenschmidt
2000-09-22 21:59 ` Michel Lanners
2000-09-20 12:08 ` Geert Uytterhoeven
2000-09-20 16:31 ` Matt Porter
-- strict thread matches above, loose matches on Subject: below --
2000-09-21 7:30 Iain Sandoe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39D4191A.5C8DE9F0@mvista.com \
--to=dan@mvista$(echo .)com \
--cc=bh40@calva$(echo .)net \
--cc=linuxppc-dev@lists$(echo .)linuxppc.org \
--cc=paulus@linuxcare$(echo .)com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox