* EST8260 Boot Problem
@ 2000-12-18 22:55 Huy Vu
2000-12-18 23:15 ` Dan Malek
0 siblings, 1 reply; 2+ messages in thread
From: Huy Vu @ 2000-12-18 22:55 UTC (permalink / raw)
To: 'linuxppc-embedded@lists•linuxppc.org'
This is what I am using
vmlinuz-sbc8260-2.4.0-test2-1.2.2-3 from the HHL web site
I ran the kernel through the "vxhack" with the mod for LE
Then from the "BKM>" prompt I tried to load the kernel (after a successful
TFTP load) to the Vx's Files system. I know this works because I have loaded
VxWorks shell and run using it
When I load the Linux image I get the following error
-------
>BKM>
>BKM>osboot vmlinuz-sbc8260
Loading file vmlinuz-sbc8260...Done
>BKM>go
>RUN>
!HALT! - [msg90007]* Exception taken; PC = 0x00900000 Software Emulation
>BKM>
--------
Can someone tell me what is going on?
Thanks in advance..
Huy
P.S. What's HHL talking about when they say "estflash" or "estsimm" and
"rmon" is included in the CDK.. I installed all packages and I have yet to
find it...
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: EST8260 Boot Problem
2000-12-18 22:55 EST8260 Boot Problem Huy Vu
@ 2000-12-18 23:15 ` Dan Malek
0 siblings, 0 replies; 2+ messages in thread
From: Dan Malek @ 2000-12-18 23:15 UTC (permalink / raw)
To: Huy Vu; +Cc: 'linuxppc-embedded@lists•linuxppc.org'
Huy Vu wrote:
> !HALT! - [msg90007]* Exception taken; PC = 0x00900000 Software Emulation
All I know is this is the start address of the image. At least it got
that much right. I have never used this monitor.
> P.S. What's HHL talking about when they say "estflash" or "estsimm" and
> "rmon" is included in the CDK.. I installed all packages and I have yet to
> find it...
It is a small rom monitor I wrote along with some programs you can
run from Linux to program the simm and flash prom on the board. They
have been nothing but headaches, and I think MontaVista consultants
have helped a few customers with the software. It is best if this
software is just forgotten. The Wind/EST tools don't want to accomodate
anything but their formats of data in the flash and VxWorks, and trying
to mix these tools with any other software is very frustrating.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-12-18 23:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-12-18 22:55 EST8260 Boot Problem Huy Vu
2000-12-18 23:15 ` Dan Malek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox