Subject: MPC823: i2c-algo-8xx read interrupt?

From: "[email-masked]" <[email-masked]>
Date: Fri, 08 Feb 2002 16:18:17 +0100

Hi,

When testing with i2c reading an eeprom on a MPC823e I get the message "IIC
read; complete but rbuf empty". IMHO this is because the interrupt in the TX
buffer is enabled intead of the the interrupt of the RX buffer. Is this a bug
or is there a reason behind this?

Best regards,
		Bart Thissen,	Ardis Technologies bv

i2c-algo-8xx.c: cpm_iic_read

Original (with TX interrupt and warning)

	tbdf->cbd_datlen = count + 1;
	tbdf->cbd_sc =
		BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST |
		BD_SC_WRAP | BD_IIC_START;

	rbdf->cbd_datlen = 0;
	rbdf->cbd_bufaddr = __pa(buf);
	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;

With RX interrupt (without warning):

	tbdf->cbd_datlen = count + 1;
	tbdf->cbd_sc =
		BD_SC_READY | BD_SC_LAST |
		BD_SC_WRAP | BD_IIC_START;

	rbdf->cbd_datlen = 0;
	rbdf->cbd_bufaddr = __pa(buf);
	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP | BD_SC_INTRPT;

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/