* SMC2 synchronous driver for 8xx
@ 2003-07-30 6:03 Dmytro Bablinyuk
2003-07-30 10:27 ` Alex Zeffertt
0 siblings, 1 reply; 2+ messages in thread
From: Dmytro Bablinyuk @ 2003-07-30 6:03 UTC (permalink / raw)
To: linuxppc mail list
I have kernel 2.4.21 and MPC866ADS eval board. The sync should work
through TSA using signals L1RSYNCx, L1TSYNCx etc.
I've been suggested to use syncppp.c module in my kernel and hdlcppp.c
which I could not find anywhere, the ftp://qslinux.org is not working.
If this is right could somebody please email me a hdlcppp and give me a
clue where to start.
I will very much appreciate if anybody already done something similar to
give me a clue where to look at, and I will very much appreciate any
code, examples.
Thank you very much for any help.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: SMC2 synchronous driver for 8xx
2003-07-30 6:03 SMC2 synchronous driver for 8xx Dmytro Bablinyuk
@ 2003-07-30 10:27 ` Alex Zeffertt
0 siblings, 0 replies; 2+ messages in thread
From: Alex Zeffertt @ 2003-07-30 10:27 UTC (permalink / raw)
To: Dmytro Bablinyuk; +Cc: linuxppc-embedded@lists•linuxppc.org
Hi Dmytro,
This is probably not very close to what you want, but.... If you want
to see an example of how to configure the TSA, SIRAM, and the signals
L1RSYNCx, and L1TSYNCx, you could have a look at the source for the
tsa.o module on my site http://mpc860sar.sourceforge.net.
This code sets up the serial interface to carry ATM traffic generated by
SCC1. Although this is not what you want to do, the code may be helpful
as an example for setting up the low level stuff.
Alex
On Wed, 2003-07-30 at 07:03, Dmytro Bablinyuk wrote:
> I have kernel 2.4.21 and MPC866ADS eval board. The sync should work
> through TSA using signals L1RSYNCx, L1TSYNCx etc.
> I've been suggested to use syncppp.c module in my kernel and hdlcppp.c
> which I could not find anywhere, the ftp://qslinux.org is not working.
> If this is right could somebody please email me a hdlcppp and give me a
> clue where to start.
> I will very much appreciate if anybody already done something similar to
> give me a clue where to look at, and I will very much appreciate any
> code, examples.
>
> Thank you very much for any help.
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-07-30 10:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-30 6:03 SMC2 synchronous driver for 8xx Dmytro Bablinyuk
2003-07-30 10:27 ` Alex Zeffertt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox