From: "Mark A. Greer" <mgreer@mvista•com>
To: Yuxiao Xi <xiyuxiao@harbournetworks•com>
Cc: linuxppc-embedded <linuxppc-embedded@lists•linuxppc.org>
Subject: Re: UART prints very slow
Date: Tue, 30 Sep 2003 11:48:02 -0700 [thread overview]
Message-ID: <3F79CFE2.4030708@mvista.com> (raw)
In-Reply-To: <200309300155.UAA03360@lists.linuxppc.org>
Interrupt problem. Double check the irq you specified in the uart setup
stuff.
Mark
--
Yuxiao Xi wrote:
>Hello,all,
> I am developing my board with CPU MPC8240 and a UART ST16C2552.
>I use MontaVista Linux 2.1. Now I have successfully logged in the
>shell.But there is a question that I can't resolve:( I am sure that the
>UART is successfully initialized except that ST16C2552 is detected as
>ST16650.I debugged the UART interrupt and the printk info showed that it
>was OK.
>
>QUESTION: when I input commands such as 'ls', 'cd /dev' on the shell,
>the characters of these commands are printed very slow on the screen
>and the command execution results as well. I think these commands and
>their execution results are printed through UART interrupt.Is MPC8240
>interrupt ACK so slow? BTW: while system booting,the UART prints very
>quickly in polling print mode.
>
>¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Yuxiao Xi
>¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡xiyuxiao@harbournetworks•com
>¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2003-09-30
>
>
>
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2003-09-30 18:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-30 2:07 UART prints very slow Yuxiao Xi
2003-09-30 18:48 ` Mark A. Greer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F79CFE2.4030708@mvista.com \
--to=mgreer@mvista$(echo .)com \
--cc=linuxppc-embedded@lists$(echo .)linuxppc.org \
--cc=xiyuxiao@harbournetworks$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox