From: Pavel Fedin <sonic_amiga@rambler•ru>
To: linuxppc-dev@ozlabs•org
Cc: paulus@samba•org
Subject: [PATCH] Virtual DMA support for floppy driver for new powerpc architecture
Date: Fri, 26 Jan 2007 10:08:26 +0300 [thread overview]
Message-ID: <406146427.20070126100826@rambler.ru> (raw)
[-- Attachment #1: Type: text/plain, Size: 539 bytes --]
Hello!
During ppc64+ppc merge virtual DMA code for floppy driver was not
ported. This patch restores virtual DMA support for floppy in new
powerpc target.
It is necessary at least on Pegasos and AmigaOne machines for the
floppy drive to function. ISA DMA controller works incorrectly there
due to its addressing limitations.
Virtual DMA mode is activated by floppy=nodma option passed to the
kernel (or module). There's no automatic switch like on i386.
--
Best regards,
Pavel mailto:sonic_amiga@rambler•ru
[-- Attachment #2: powerpc_floppy-vdma-2.6.19.2.diff --]
[-- Type: application/octet-stream, Size: 4682 bytes --]
--- linux-2.6.19.2/include/asm-powerpc/floppy.h.orig 2007-01-10 22:10:37.000000000 +0300
+++ linux-2.6.19.2/include/asm-powerpc/floppy.h 2007-01-25 02:14:54.000000000 +0300
@@ -17,28 +17,115 @@
#define fd_outb(value,port) outb_p(value,port)
#define fd_enable_dma() enable_dma(FLOPPY_DMA)
-#define fd_disable_dma() disable_dma(FLOPPY_DMA)
-#define fd_request_dma() request_dma(FLOPPY_DMA, "floppy")
-#define fd_free_dma() free_dma(FLOPPY_DMA)
+#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA)
#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA)
#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode)
#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
+#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA)
#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
-#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt, \
- IRQF_DISABLED, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
-#ifdef CONFIG_PCI
-
#include <linux/pci.h>
#include <asm/ppc-pci.h> /* for ppc64_isabridge_dev */
-#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io)
+#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+ void (*_disable_dma)(unsigned int dmanr);
+ void (*_free_dma)(unsigned int dmanr);
+ int (*_get_dma_residue)(unsigned int dummy);
+ int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+ unsigned char st;
+ int lcount;
+ char *lptr;
+
+ if (!doing_vdma)
+ return floppy_interrupt(irq, dev_id);
+
+
+ st = 1;
+ for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st=inb(virtual_dma_port+4) & 0xa0 ;
+ if (st != 0xa0)
+ break;
+ if (virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port+5);
+ else
+ *lptr = inb_p(virtual_dma_port+5);
+ }
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ st = inb(virtual_dma_port+4);
+
+ if (st == 0x20)
+ return IRQ_HANDLED;
+ if (!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+ doing_vdma = 0;
+ floppy_interrupt(irq, dev_id);
+ return IRQ_HANDLED;
+ }
+ return IRQ_HANDLED;
+}
+
+static void vdma_disable_dma(unsigned int dummy)
+{
+ doing_vdma = 0;
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+ return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+ if (can_use_virtual_dma)
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
+ else
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ doing_vdma = 1;
+ virtual_dma_port = io;
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_addr = addr;
+ virtual_dma_count = size;
+ virtual_dma_residue = 0;
+ return 0;
+}
-static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size,
- int mode, int io)
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
{
static unsigned long prev_size;
static dma_addr_t bus_addr = 0;
@@ -46,6 +133,7 @@
static int prev_dir;
int dir;
+ doing_vdma = 0;
dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
if (bus_addr
@@ -74,11 +162,32 @@
return 0;
}
-#endif /* CONFIG_PCI */
+static struct fd_dma_ops real_dma_ops =
+{
+ ._disable_dma = disable_dma,
+ ._free_dma = free_dma,
+ ._get_dma_residue = get_dma_residue,
+ ._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+ ._disable_dma = vdma_disable_dma,
+ ._free_dma = vdma_nop,
+ ._get_dma_residue = vdma_get_dma_residue,
+ ._dma_setup = vdma_dma_setup
+};
-__inline__ void virtual_dma_init(void)
+static int fd_request_dma()
{
- /* Nothing to do on PowerPC */
+ if (can_use_virtual_dma & 1) {
+ fd_ops = &virt_dma_ops;
+ return 0;
+ }
+ else {
+ fd_ops = &real_dma_ops;
+ return request_dma(FLOPPY_DMA, "floppy");
+ }
}
static int FDC1 = 0x3f0;
next reply other threads:[~2007-01-26 7:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-26 7:08 Pavel Fedin [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-01-29 12:13 [PATCH] Virtual DMA support for floppy driver for new powerpc architecture Pavel Fedin
2007-02-07 1:24 ` Paul Mackerras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=406146427.20070126100826@rambler.ru \
--to=sonic_amiga@rambler$(echo .)ru \
--cc=linuxppc-dev@ozlabs$(echo .)org \
--cc=paulus@samba$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox