* memec virtex 2 Pro
@ 2005-05-27 2:45 mcnernbm
2005-05-27 6:46 ` S. van Beek
2005-05-27 9:20 ` Andrei Konovalov
0 siblings, 2 replies; 3+ messages in thread
From: mcnernbm @ 2005-05-27 2:45 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 406 bytes --]
Has anyone had any success getting linux to boot on a memc viretx 2 board?
I am trying to replicate the steps to get the kernel built for the ml300
but run error after error in doing so. The make zImage is borken and
fails all the time. Anybody that has success with the memec virtex 2 pro
or the xilinx ml300 board it would be greatly appreciated if you could
explain how you did so.
Thanks
Brett
[-- Attachment #2: Type: text/html, Size: 544 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: memec virtex 2 Pro
2005-05-27 2:45 memec virtex 2 Pro mcnernbm
@ 2005-05-27 6:46 ` S. van Beek
2005-05-27 9:20 ` Andrei Konovalov
1 sibling, 0 replies; 3+ messages in thread
From: S. van Beek @ 2005-05-27 6:46 UTC (permalink / raw)
To: linuxppc-embedded, mcnernbm
[-- Attachment #1: Type: text/plain, Size: 1107 bytes --]
Hi there
We have montavista linux running on a memec virtex II-pro ff672 board with communications 2 module here.
What error do you get? What steps do you need help with? I can send you a working .config file if you want.
Regards
Sander van Beek
----- Original Message -----
From: mcnernbm@notes•udayton.edu
To: linuxppc-embedded@ozlabs•org
Sent: Friday 27 May 2005 4:45
Subject: memec virtex 2 Pro
Has anyone had any success getting linux to boot on a memc viretx 2 board? I am trying to replicate the steps to get the kernel built for the ml300 but run error after error in doing so. The make zImage is borken and fails all the time. Anybody that has success with the memec virtex 2 pro or the xilinx ml300 board it would be greatly appreciated if you could explain how you did so.
Thanks
Brett
------------------------------------------------------------------------------
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs•org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
[-- Attachment #2: Type: text/html, Size: 2389 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: memec virtex 2 Pro
2005-05-27 2:45 memec virtex 2 Pro mcnernbm
2005-05-27 6:46 ` S. van Beek
@ 2005-05-27 9:20 ` Andrei Konovalov
1 sibling, 0 replies; 3+ messages in thread
From: Andrei Konovalov @ 2005-05-27 9:20 UTC (permalink / raw)
To: mcnernbm; +Cc: linuxppc-embedded
mcnernbm@notes•udayton.edu wrote:
> Has anyone had any success getting linux to boot on a memc viretx 2 board?
> I am trying to replicate the steps to get the kernel built for the ml300
> but run error after error in doing so. The make zImage is borken and
> fails all the time. Anybody that has success with the memec virtex 2 pro
> or the xilinx ml300 board it would be greatly appreciated if you could
> explain how you did so.
> Thanks
> Brett
>
What kernel tree are you using?
Thanks,
Andrei
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs•org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-05-27 9:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-27 2:45 memec virtex 2 Pro mcnernbm
2005-05-27 6:46 ` S. van Beek
2005-05-27 9:20 ` Andrei Konovalov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox