* RE: Re Re: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads
@ 2005-09-12 16:23 Rune Torgersen
2005-09-13 4:52 ` New message about: " KylongMu
0 siblings, 1 reply; 3+ messages in thread
From: Rune Torgersen @ 2005-09-12 16:23 UTC (permalink / raw)
To: KylongMu, Linuxppc-embedded
=20
> -----Original Message-----
> From:KylongMu
> Sent: Monday, September 12, 2005 10:58
> To: Linuxppc-embedded@ozlabs•org
> Subject: Re Re: "Lost interrupt" with promise20268 PCI-IDE=20
> back the test result to you , but which PCI-IDE bridge will=20
> support DMA on
> MPC8540 ? I wonder the bandwidth of IDE will be a bottleneck=20
> of my system
> requirement .
I have run a Silicon Image SiI0680 based card on a MPC8560ADS board
without problems
^ permalink raw reply [flat|nested] 3+ messages in thread
* New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads
2005-09-12 16:23 Re Re: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads Rune Torgersen
@ 2005-09-13 4:52 ` KylongMu
2005-09-13 10:36 ` Clemens Koller
0 siblings, 1 reply; 3+ messages in thread
From: KylongMu @ 2005-09-13 4:52 UTC (permalink / raw)
To: 'Rune Torgersen'; +Cc: Linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 975 bytes --]
Hi , all
First I according Clemens Koller' suggestion : remove DMA part ,
but the result is no change.
According Clemens Koller's message , I guess mabe the problem is on the
hardware configuration.
So I checked my schematics and
"arch/ppc/platforms/85xx/mpc85xx_ads_common.c" at line 170 .
The attached file is changed .
After these , "Lost interrupt" appears on PCI1-Slot1 , but my
PCI1-Slot2 shows no "Lost interrupt"
the .config file is still without change .
Another new problem is I can't mount it on , I attached the steps
message of new operation.
Please help me check it .
Thanks a lot !
Rune Torgersen wrote :
>I have run a Silicon Image SiI0680 based card on a MPC8560ADS board without
problems
Clemens Koller wrote:
>Try to turn off DMA. It doesn't work yet AFAIK.
>I am using a PDC20269 on PCI on a MPC8540, too. See my .config file...
>I didn't focus on this problem yet. Let me know if you get it going.
>My board PM854 is similar to the MPC8540_ADS
[-- Attachment #2: mpc8540.zip --]
[-- Type: application/octet-stream, Size: 9511 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads
2005-09-13 4:52 ` New message about: " KylongMu
@ 2005-09-13 10:36 ` Clemens Koller
0 siblings, 0 replies; 3+ messages in thread
From: Clemens Koller @ 2005-09-13 10:36 UTC (permalink / raw)
To: KylongMu; +Cc: Linuxppc-embedded
Hello, KylongMu, Rune!
(Please reply to the thread.)
> First I according Clemens Koller' suggestion : remove DMA part ,
> but the result is no change.
Okay, sorry if my 'workaround' (let's call it 'cheat') didn't do it for you...
> According Clemens Koller's message , I guess mabe the problem is on the
> hardware configuration.
> So I checked my schematics and
> "arch/ppc/platforms/85xx/mpc85xx_ads_common.c" at line 170 .
> The attached file is changed .
> After these , "Lost interrupt" appears on PCI1-Slot1 , but my
> PCI1-Slot2 shows no "Lost interrupt"
> the .config file is still without change .
> Another new problem is I can't mount it on , I attached the steps
> message of new operation.
> Please help me check it .
To be honest, I didn't tell you that there are still issues with my
mpc85xx_map_irq() and friends(). I didn't fix the table for my board
yet as the official CR854 demo board has only on PCI slot and I just
didn't care about proper IDSEL->IRQ mapping.
The hardware add-on we design should be compatible to the ADS board (or to
be precise to the default mpc8540_ads behaviour in the kernel) as much
as possible, so there should be no need for a separate platform port.
> Rune Torgersen wrote :
>>I have run a Silicon Image SiI0680 based card on a MPC8560ADS board without
> problems
Yes, but AFAIK it's only 32bit/33MHz PCI and therefore not speedy enough for
the things we want to achieve (100..200Mbyte+/sec).
So, this problem with the PDC has to be fixed... but it will take some time.
Best greets,
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-09-13 10:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-12 16:23 Re Re: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads Rune Torgersen
2005-09-13 4:52 ` New message about: " KylongMu
2005-09-13 10:36 ` Clemens Koller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox