Re: Using bestcomm in an external module (MPC5200B to be exact)

From: Frank Bennett <bennett78@digis•net>
To: Trueskew <trueskew@gmail•com>
Cc: linuxppc-embedded@ozlabs•org
Subject: Re: Using bestcomm in an external module (MPC5200B to be exact)
Date: Sat, 17 Jun 2006 12:53:15 -0600	[thread overview]
Message-ID: <44944F9B.8060007@digis.net> (raw)
In-Reply-To: <4493894e.6d57ffd8.019a.ffff95b9@mx.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 1990 bytes --]

Trueskew wrote:

> I'm writing a driver for a TI codec attached to the MPC5200B PSC3 
> codec lines on a Lite5200b.  It's an external module, and I'd like to 
> use Bestcomm with it.  I've already tried a bunch of horrible things 
> to get it to work.  I could say it's close, but by close I mean the 
> FEC still runs, my stuff doesn't. 
>  
> 1. Can the Bestcomm I/F be used by an external module, or is the 
> module required to be built in if built-in drivers use Bestcomm?  
> TasksInitAPI (no so bad) and TasksLoadImage (yeah, bad) aren't really 
> supposed to be called more than once from what I've read, and the 
> kernel loads them for ethernet and ATA (no disk in my system if that 
> matters). 
>  
> 2. If it can be used by an external module, how would I do it?  I've 
> tried compiling the source into my module and replicating the 
> initialization the kernel does in addition to my own stuff.  It's not 
> too bad, though I don't get any interrupts yet.
>  
> The LTIB from Freescale includes AIC23 and AC97 drivers that use 
> Bestcomm.  I built my kernel with them set as modules, and they had 
> the same unresolved problems that my driver has on insmod, so I'm 
> pessimistic.  If someone could put me out of my misery one way or 
> another, I'd appreciate it.

Might check out the driver posted by Bob Petersen:
    http://ozlabs.org/pipermail/linuxppc-embedded/2005-September/020210.html
using DENX linuxppc_2_4_devel/arch/ppc/5xxx_io/  i2s.c, psc.c and Bestcomm/

Frank

>  
> Thanks.
> Sal
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded@ozlabs•org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
*/Frank Bennett
President/*

Mathegraphics,LLC
613 Bentley Pl
Fort Collins,CO 80526
970-229-9269 (hm) 970-402-9269 (cell)
www.mathegraphics.com <http://www.mathegraphics.com>
bennett78@digis•net <mailto:bennett78@digis•net>

[-- Attachment #2: Type: text/html, Size: 4215 bytes --]