public inbox for linuxppc-dev@ozlabs.org 
 help / color / mirror / Atom feed

* Gb Ethernet on xilinx gemac IP
@ 2006-06-20  6:45 Xavier Grave
  2006-06-20  9:04 ` Filippo Capurso - DAVE srl
  2006-06-21  2:20 ` GORAN GVOZDENOVIC
  0 siblings, 2 replies; 4+ messages in thread
From: Xavier Grave @ 2006-06-20  6:45 UTC (permalink / raw)
  To: linuxppc-embedded, ppc dev

Hi,

I'm currently running linux with 10/100 MBits xilinx ethernet driver. I
have a memec 2VP20 evaluation board.
We have bought a PCOM2 module in order to have a Gb PHY. I have
implemented an hardware to handle it but whatever linux version I take
(2.4 from denx web site, 2.6.17 from kernel.org), I can't configure a Gb
ethernet driver. And the 10/100 driver don't configure my Gb PHY...

I have compiled my linux kernel based on the ml300 configuration default
config.

Does anyone has an idea ?

Thanks, xavier

^ permalink raw reply	[flat|nested] 4+ messages in thread

• * Re: Gb Ethernet on xilinx gemac IP
    2006-06-20  6:45 Gb Ethernet on xilinx gemac IP Xavier Grave
  @ 2006-06-20  9:04 ` Filippo Capurso - DAVE srl
    2006-06-20  7:38   ` Xavier Grave
    2006-06-21  2:20 ` GORAN GVOZDENOVIC
    1 sibling, 1 reply; 4+ messages in thread
  From: Filippo Capurso - DAVE srl @ 2006-06-20  9:04 UTC (permalink / raw)
    To: grave; +Cc: linuxppc-embedded
  
  Hi Xavier,
  
  I'm trying to get running linux 2.6.17 on my ML403 board (Virtex-4) but 
  I'm having some trouble with the MMU initialization...
  This my message to the ML:
  
  http://ozlabs.org/pipermail/linuxppc-embedded/2006-June/023321.html
  
  Did you have similar problems? Have you any idea that could help me?
  Thank you so much.
  
  About your question:
  
  Xavier Grave ha scritto:
  > Hi,
  > 
  > I'm currently running linux with 10/100 MBits xilinx ethernet driver. I
  > have a memec 2VP20 evaluation board.
  > We have bought a PCOM2 module in order to have a Gb PHY. I have
  > implemented an hardware to handle it but whatever linux version I take
  > (2.4 from denx web site, 2.6.17 from kernel.org), I can't configure a Gb
  > ethernet driver. And the 10/100 driver don't configure my Gb PHY...
  > 
  > I have compiled my linux kernel based on the ml300 configuration default
  > config.
  > 
  > Does anyone has an idea ?
  This is a patch for ML403 board, it adds the linux 2.6 driver for TEMAC.
  
  http://ozlabs.org/pipermail/linuxppc-embedded/2006-March/022365.html
  
  Hope this helps.
  
  > 
  > Thanks, xavier
  > 
  > _______________________________________________
  > Linuxppc-embedded mailing list
  > Linuxppc-embedded@ozlabs•org
  > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
  > 
  > 
  
  Regards,
  
  Filippo Capurso
  
  -- 
  
  DAVE Srl - Electronics System House
  via Forniz 2/1
  33080 Porcia (PN) - Italy
  Telephone: +39.0434.921215
  Telefax: +39.0434.1994030
  Freefax: +39.02.700520062
  web: www.dave-tech.it
  e-mail: filippo.capurso@dave-tech•it
  how to reach us: http://mail.map24.com/dave
  
  ^ permalink raw reply	[flat|nested] 4+ messages in thread

• • * Re: Gb Ethernet on xilinx gemac IP
      2006-06-20  9:04 ` Filippo Capurso - DAVE srl
    @ 2006-06-20  7:38   ` Xavier Grave
      0 siblings, 0 replies; 4+ messages in thread
    From: Xavier Grave @ 2006-06-20  7:38 UTC (permalink / raw)
      To: filippo.capurso; +Cc: linuxppc-embedded
    
    [-- Attachment #1: Type: text/plain, Size: 1829 bytes --]
    
    I have a 2.6.17 kernel compiling and booting but still have little pb
    with initrd attachement...
    here is my .config file : you should modify it a little ml300 -> ml400
    and modify your xparameters_ml400.h according to the hardware you
    difined in xps or ise... You should also modify the kernel argument line
    according to what you need root nfs or whatever you use...
    
    xavier
    Le mardi 20 juin 2006 à 11:04 +0200, Filippo Capurso - DAVE srl a
    écrit :
    > Hi Xavier,
    > 
    > I'm trying to get running linux 2.6.17 on my ML403 board (Virtex-4) but 
    > I'm having some trouble with the MMU initialization...
    > This my message to the ML:
    > 
    > http://ozlabs.org/pipermail/linuxppc-embedded/2006-June/023321.html
    > 
    > Did you have similar problems? Have you any idea that could help me?
    > Thank you so much.
    > 
    > About your question:
    > 
    > Xavier Grave ha scritto:
    > > Hi,
    > > 
    > > I'm currently running linux with 10/100 MBits xilinx ethernet driver. I
    > > have a memec 2VP20 evaluation board.
    > > We have bought a PCOM2 module in order to have a Gb PHY. I have
    > > implemented an hardware to handle it but whatever linux version I take
    > > (2.4 from denx web site, 2.6.17 from kernel.org), I can't configure a Gb
    > > ethernet driver. And the 10/100 driver don't configure my Gb PHY...
    > > 
    > > I have compiled my linux kernel based on the ml300 configuration default
    > > config.
    > > 
    > > Does anyone has an idea ?
    > This is a patch for ML403 board, it adds the linux 2.6 driver for TEMAC.
    > 
    > http://ozlabs.org/pipermail/linuxppc-embedded/2006-March/022365.html
    > 
    > Hope this helps.
    > 
    > > 
    > > Thanks, xavier
    > > 
    > > _______________________________________________
    > > Linuxppc-embedded mailing list
    > > Linuxppc-embedded@ozlabs•org
    > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
    > > 
    > > 
    > 
    > Regards,
    > 
    > Filippo Capurso
    > 
    
    [-- Attachment #2: config_mem --]
    [-- Type: text/plain, Size: 13755 bytes --]
    
    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.17
    # Mon Jun 19 17:41:53 2006
    #
    CONFIG_MMU=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_PPC=y
    CONFIG_PPC32=y
    CONFIG_GENERIC_NVRAM=y
    CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    
    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    
    #
    # General setup
    #
    CONFIG_LOCALVERSION=""
    CONFIG_LOCALVERSION_AUTO=y
    # CONFIG_SWAP is not set
    CONFIG_SYSVIPC=y
    # CONFIG_POSIX_MQUEUE is not set
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    # CONFIG_IKCONFIG is not set
    # CONFIG_RELAY is not set
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SHMEM=y
    CONFIG_SLAB=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    # CONFIG_SLOB is not set
    
    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    CONFIG_MODULE_SRCVERSION_ALL=y
    CONFIG_KMOD=y
    
    #
    # Block layer
    #
    # CONFIG_LBD is not set
    # CONFIG_BLK_DEV_IO_TRACE is not set
    # CONFIG_LSF is not set
    
    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_DEFAULT_AS=y
    # CONFIG_DEFAULT_DEADLINE is not set
    # CONFIG_DEFAULT_CFQ is not set
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="anticipatory"
    
    #
    # Processor
    #
    # CONFIG_6xx is not set
    CONFIG_40x=y
    # CONFIG_44x is not set
    # CONFIG_8xx is not set
    # CONFIG_E200 is not set
    # CONFIG_E500 is not set
    # CONFIG_MATH_EMULATION is not set
    # CONFIG_KEXEC is not set
    # CONFIG_CPU_FREQ is not set
    CONFIG_4xx=y
    # CONFIG_WANT_EARLY_SERIAL is not set
    
    #
    # IBM 4xx options
    #
    # CONFIG_BUBINGA is not set
    # CONFIG_CPCI405 is not set
    # CONFIG_EP405 is not set
    # CONFIG_REDWOOD_5 is not set
    # CONFIG_REDWOOD_6 is not set
    # CONFIG_SYCAMORE is not set
    # CONFIG_WALNUT is not set
    CONFIG_XILINX_ML300=y
    # CONFIG_XILINX_ML403 is not set
    CONFIG_IBM405_ERR77=y
    CONFIG_IBM405_ERR51=y
    CONFIG_XILINX_VIRTEX_II_PRO=y
    CONFIG_XILINX_VIRTEX=y
    CONFIG_EMBEDDEDBOOT=y
    # CONFIG_PPC4xx_DMA is not set
    CONFIG_PPC_GEN550=y
    CONFIG_UART0_TTYS0=y
    # CONFIG_UART0_TTYS1 is not set
    CONFIG_NOT_COHERENT_CACHE=y
    
    #
    # Platform options
    #
    # CONFIG_PC_KEYBOARD is not set
    # CONFIG_HIGHMEM is not set
    # CONFIG_HZ_100 is not set
    CONFIG_HZ_250=y
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=250
    CONFIG_PREEMPT_NONE=y
    # CONFIG_PREEMPT_VOLUNTARY is not set
    # CONFIG_PREEMPT is not set
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    # CONFIG_SPARSEMEM_STATIC is not set
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_MISC is not set
    CONFIG_CMDLINE_BOOL=y
    CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/ram0 initrd"
    # CONFIG_PM is not set
    # CONFIG_SOFTWARE_SUSPEND is not set
    CONFIG_SECCOMP=y
    CONFIG_ISA_DMA_API=y
    
    #
    # Bus options
    #
    # CONFIG_PPC_I8259 is not set
    # CONFIG_PCI is not set
    # CONFIG_PCI_DOMAINS is not set
    
    #
    # PCCARD (PCMCIA/CardBus) support
    #
    # CONFIG_PCCARD is not set
    
    #
    # Advanced setup
    #
    # CONFIG_ADVANCED_OPTIONS is not set
    
    #
    # Default settings for advanced configuration options are used
    #
    CONFIG_HIGHMEM_START=0xfe000000
    CONFIG_LOWMEM_SIZE=0x30000000
    CONFIG_KERNEL_START=0xc0000000
    CONFIG_TASK_SIZE=0x80000000
    CONFIG_CONSISTENT_START=0xff100000
    CONFIG_CONSISTENT_SIZE=0x00200000
    CONFIG_BOOT_LOAD=0x00400000
    
    #
    # Networking
    #
    CONFIG_NET=y
    
    #
    # Networking options
    #
    # CONFIG_NETDEBUG is not set
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    CONFIG_IP_FIB_HASH=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    # CONFIG_IP_PNP_BOOTP is not set
    # CONFIG_IP_PNP_RARP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_XFRM_TUNNEL is not set
    # CONFIG_INET_TUNNEL is not set
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_BIC=y
    # CONFIG_IPV6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    # CONFIG_NETFILTER is not set
    
    #
    # DCCP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_DCCP is not set
    
    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set
    
    #
    # TIPC Configuration (EXPERIMENTAL)
    #
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    
    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set
    
    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    # CONFIG_IEEE80211 is not set
    
    #
    # Device Drivers
    #
    
    #
    # Generic Driver Options
    #
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    # CONFIG_FW_LOADER is not set
    # CONFIG_DEBUG_DRIVER is not set
    
    #
    # Connector - unified userspace <-> kernelspace linker
    #
    # CONFIG_CONNECTOR is not set
    
    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set
    
    #
    # Parallel port support
    #
    # CONFIG_PARPORT is not set
    
    #
    # Plug and Play support
    #
    
    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    # CONFIG_BLK_DEV_LOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=65536
    CONFIG_BLK_DEV_INITRD=y
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set
    
    #
    # ATA/ATAPI/MFM/RLL support
    #
    # CONFIG_IDE is not set
    
    #
    # SCSI device support
    #
    # CONFIG_RAID_ATTRS is not set
    # CONFIG_SCSI is not set
    
    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set
    
    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set
    
    #
    # IEEE 1394 (FireWire) support
    #
    
    #
    # I2O device support
    #
    
    #
    # Macintosh device drivers
    #
    # CONFIG_WINDFARM is not set
    
    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    # CONFIG_DUMMY is not set
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    CONFIG_TUN=y
    
    #
    # PHY device support
    #
    # CONFIG_PHYLIB is not set
    
    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_IBM_EMAC is not set
    
    #
    # Ethernet (1000 Mbit)
    #
    
    #
    # Ethernet (10000 Mbit)
    #
    
    #
    # Token Ring devices
    #
    
    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set
    
    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    
    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set
    
    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set
    
    #
    # Input device support
    #
    CONFIG_INPUT=y
    
    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set
    
    #
    # Input Device Drivers
    #
    # CONFIG_INPUT_KEYBOARD is not set
    # CONFIG_INPUT_MOUSE is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set
    
    #
    # Hardware I/O ports
    #
    # CONFIG_SERIO is not set
    # CONFIG_GAMEPORT is not set
    
    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set
    
    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set
    
    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set
    
    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set
    
    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_NVRAM is not set
    # CONFIG_GEN_RTC is not set
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    
    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_AGP is not set
    # CONFIG_RAW_DRIVER is not set
    
    #
    # TPM devices
    #
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set
    
    #
    # I2C support
    #
    # CONFIG_I2C is not set
    
    #
    # SPI support
    #
    # CONFIG_SPI is not set
    # CONFIG_SPI_MASTER is not set
    
    #
    # Dallas's 1-wire bus
    #
    # CONFIG_W1 is not set
    
    #
    # Hardware Monitoring support
    #
    # CONFIG_HWMON is not set
    # CONFIG_HWMON_VID is not set
    
    #
    # Misc devices
    #
    
    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set
    CONFIG_VIDEO_V4L2=y
    
    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set
    
    #
    # Graphics support
    #
    # CONFIG_FB is not set
    
    #
    # Console display driver support
    #
    CONFIG_DUMMY_CONSOLE=y
    
    #
    # Sound
    #
    # CONFIG_SOUND is not set
    
    #
    # USB support
    #
    # CONFIG_USB_ARCH_HAS_HCD is not set
    # CONFIG_USB_ARCH_HAS_OHCI is not set
    # CONFIG_USB_ARCH_HAS_EHCI is not set
    
    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #
    
    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set
    
    #
    # MMC/SD Card support
    #
    # CONFIG_MMC is not set
    
    #
    # LED devices
    #
    # CONFIG_NEW_LEDS is not set
    
    #
    # LED drivers
    #
    
    #
    # LED Triggers
    #
    
    #
    # InfiniBand support
    #
    
    #
    # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
    #
    
    #
    # Real Time Clock
    #
    # CONFIG_RTC_CLASS is not set
    
    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    # CONFIG_EXT2_FS_XATTR is not set
    # CONFIG_EXT2_FS_XIP is not set
    # CONFIG_EXT3_FS is not set
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_FS_POSIX_ACL is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set
    # CONFIG_FUSE_FS is not set
    
    #
    # CD-ROM/DVD Filesystems
    #
    # CONFIG_ISO9660_FS is not set
    # CONFIG_UDF_FS is not set
    
    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    # CONFIG_NTFS_FS is not set
    
    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    # CONFIG_CONFIGFS_FS is not set
    
    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set
    
    #
    # Network File Systems
    #
    # CONFIG_NFS_FS is not set
    # CONFIG_NFSD is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # CONFIG_9P_FS is not set
    
    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y
    
    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ASCII=y
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=y
    
    #
    # IBM 40x options
    #
    
    #
    # Library routines
    #
    # CONFIG_CRC_CCITT is not set
    # CONFIG_CRC16 is not set
    CONFIG_CRC32=y
    # CONFIG_LIBCRC32C is not set
    # CONFIG_PROFILING is not set
    
    #
    # Kernel hacking
    #
    CONFIG_PRINTK_TIME=y
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_DEBUG_KERNEL=y
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_DETECT_SOFTLOCKUP=y
    # CONFIG_SCHEDSTATS is not set
    # CONFIG_DEBUG_SLAB is not set
    CONFIG_DEBUG_MUTEXES=y
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_DEBUG_KOBJECT is not set
    CONFIG_DEBUG_INFO=y
    # CONFIG_DEBUG_FS is not set
    # CONFIG_DEBUG_VM is not set
    CONFIG_FORCED_INLINING=y
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_KGDB is not set
    CONFIG_XMON=y
    # CONFIG_BDI_SWITCH is not set
    # CONFIG_SERIAL_TEXT_DEBUG is not set
    
    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set
    
    #
    # Cryptographic options
    #
    # CONFIG_CRYPTO is not set
    
    #
    # Hardware crypto devices
    #
    
    ^ permalink raw reply	[flat|nested] 4+ messages in thread

• * Re: Gb Ethernet on xilinx gemac IP
    2006-06-20  6:45 Gb Ethernet on xilinx gemac IP Xavier Grave
    2006-06-20  9:04 ` Filippo Capurso - DAVE srl
  @ 2006-06-21  2:20 ` GORAN GVOZDENOVIC
    1 sibling, 0 replies; 4+ messages in thread
  From: GORAN GVOZDENOVIC @ 2006-06-21  2:20 UTC (permalink / raw)
    To: grave, linuxppc-embedded, ppc dev
  
  Hi Xavier,
  
  Just wrapped up efforts to experiment with hard TEMAC support in 2.4 kernel 
  ( previev kit from Montavista ). DENX 2.4  distro should not be different.
  
  Here are my experience with ML403 board:
  
  Configure kernel for only eth driver offered for ML300 / ML403 ( soft EMAC - 
  10/100Mb on-chip eth ). After updating kernel tree with the BSP using xilinx 
  patch script for ML403, hard TEMAC driver will end up in 
  /drivers/net/xilinx_gige ( supported soft MAC driver ends up in 
  /drivers/net/xilinx_enet ).
  
  >From here 2 options:
  a) rename xilinx_gige folder to xilinx_enet and build kernel
  b) modify config.in script for kernel network configuration and makefile for 
  building net driver by addidng new GIGE option
  
  >From my undersanding part of driver code for gige ( adapter.c ) is PHY 
  specific and supports Marvel's PHY on ML403 board. Never looked more what it 
  does ( phy interface should be common to all PHYs ? ) but if you use 
  different PHY maybe you'll have to do some coding here ?!
  ( look for the comments in the driver )
  
  Oh yes, my tree was missing gmii.h file ( found it throuh google - don't 
  remember from where - first google hit :) !
  
  Did some test measurement and comparison with soft EMAC against  hard TEMAC 
  + PLB TEMAC and defualt SG DMA mode (3):
  Amazing performance increase: close to 100% on tcp ( netperf and netio shows 
  over 11000KB/s for max packet size of 32K on 100Mb link )
  
  Hope this helps !
  
  Goran,
  Waterloo,Canada
  
  
  ----- Original Message ----- 
  From: "Xavier Grave" <grave@ipno•in2p3.fr>
  To: <linuxppc-embedded@ozlabs•org>; "ppc dev" <linuxppc-dev@ozlabs•org>
  Sent: Tuesday, June 20, 2006 2:45 AM
  Subject: Gb Ethernet on xilinx gemac IP
  
  
  > Hi,
  >
  > I'm currently running linux with 10/100 MBits xilinx ethernet driver. I
  > have a memec 2VP20 evaluation board.
  > We have bought a PCOM2 module in order to have a Gb PHY. I have
  > implemented an hardware to handle it but whatever linux version I take
  > (2.4 from denx web site, 2.6.17 from kernel.org), I can't configure a Gb
  > ethernet driver. And the 10/100 driver don't configure my Gb PHY...
  >
  > I have compiled my linux kernel based on the ml300 configuration default
  > config.
  >
  > Does anyone has an idea ?
  >
  > Thanks, xavier
  >
  > _______________________________________________
  > Linuxppc-embedded mailing list
  > Linuxppc-embedded@ozlabs•org
  > https://ozlabs.org/mailman/listinfo/linuxppc-embedded 
  
  ^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2006-06-21  2:20 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-20  6:45 Gb Ethernet on xilinx gemac IP Xavier Grave
2006-06-20  9:04 ` Filippo Capurso - DAVE srl
2006-06-20  7:38   ` Xavier Grave
2006-06-21  2:20 ` GORAN GVOZDENOVIC

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox