From: robinpv <robinpv@aiware•co.jp>
To: linuxppc-dev@ozlabs•org
Subject: MPC5200 PCI resource allocation problem
Date: Thu, 06 Jul 2006 16:17:02 +0900 [thread overview]
Message-ID: <44ACB8EE.6000406@aiware.co.jp> (raw)
Hi,
I am using the MPC5200 based board. I have a PCI 2250 bridge, with 2
RTL8110S ethernet chips on the bridge.
I am using the lite5200 as reference code.
When i run the linux(2.6.16.1), during bootup the following messages are
displayed,
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of PCI bridge 1
PCI: bridge 1 resource 0 moved to b0fff000..b0ffffff
PCI: Cannot allocate resource region 1 of PCI bridge 1
PCI: bridge 1 resource 1 moved to aff00000..afffffff
PCI: Cannot allocate resource region 2 of PCI bridge 1
PCI: bridge 1 resource 2 moved to 9ff00000..9fffffff
Looking at the iomem and ioports dump, shows that MMIO region has been
allocated.
But in the ethernet driver when i try to access the ethernet registers.
all the register content are shown as FFFF.
Also in the mpc52xx_pci.h, the default value for these macros are...
#define MPC52xx_PCI_IO_BASE 0xb0000000
#define MPC52xx_PCI_IO_START 0x00000000
For this setting, IO resource allocation fails
changing to
#define MPC52xx_PCI_IO_START 0xB0000000
passes through.
Can some suggest what could be the problem and how to go about.??
-------------------------------------------------------------------
the iomem dump is as follows
80000000-9fffffff : PCI prefetchable memory
9ff00000-9fffffff : PCI Bus #01
a0000000-afffffff : PCI memory
a0000000-a07fffff : 0000:00:10.0
a0800000-a09fffff : 0000:00:10.0
a0840000-a0840057 : ohci_hcd
a0a00000-a0a000ff : 0000:00:11.0
a0a00000-a0a000ff : SiI680
a0a40000-a0a7ffff : 0000:00:1a.0
aff00000-afffffff : PCI Bus #01
aff00000-aff000ff : 0000:01:02.0
aff00000-aff000ff : r8169 <= Ethernet 1
aff00100-aff001ff : 0000:01:03.0
aff00100-aff001ff : r8169 <=Ethernet 2
f0000900-f000097f : mpc52xx-mscan.0
f0000980-f00009ff : mpc52xx-mscan.1
f0000f00-f0000f1f : mpc52xx-spi
f0001000-f00010ff : ppc-soc-ohci
f0001300-f000130f : mpc52xx-bdlc
f0002000-f000209f : mpc52xx-psc.0
f0002000-f000209f : mpc52xx_psc_uart
f0002200-f000229f : mpc52xx-psc.1
f0002400-f000249f : mpc52xx-psc.2
f0002600-f000269f : mpc52xx-psc.3
f0002800-f000289f : mpc52xx-psc.4
f0002c00-f0002c9f : mpc52xx-psc.5
f0003000-f00033ff : mpc52xx-fec
f0003a00-f0003aff : mpc52xx-ata
f0003d00-f0003d1f : fsl-i2c.0
f0003d40-f0003d5f : fsl-i2c.1
-------------------------------------------------------
the ioports dump is
b0000000-b0000007 : 0000:00:11.0
b0000008-b000000b : 0000:00:11.0
b000000c-b000000f : 0000:00:11.0
b0000010-b0000017 : 0000:00:11.0
b0000020-b000002f : 0000:00:11.0
b0fff000-b0ffffff : PCI Bus #01
b0fff000-b0fff0ff : 0000:01:02.0
b0fff000-b0fff0ff : r8169 <=Ethernet 1
b0fff400-b0fff4ff : 0000:01:03.0
b0fff400-b0fff4ff : r8169 <=Ethernet 2
----------------------------------------------------------
With Regards,
Robin
reply other threads:[~2006-07-06 7:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44ACB8EE.6000406@aiware.co.jp \
--to=robinpv@aiware$(echo .)co.jp \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox