Subject: Re: 11-16-05 2.6.14 on AMCC Yosemite boar d(PCI-IDE card boot error)

From: Stephen Yee <[email-masked]>
Date: Thu, 14 Sep 2006 04:11:25 +0800

Hi All,

I have tested and debuged the ELDK's kernel 2.6.14 with PDC20269 PCI-IDE
card, the system paniced when it run the 'ide_pci_setup_ports' funcation
[drivers/ide/setup_pci.c], the attached files included the entry log
messages, and ksysoops messages when the kernel paniced, and my kernel
configuration file and BDI2000 configuration file.

would you please give some advice about this issue?

Thanks in Advance,
Stephen.
--------------------------------------------------------------

Funcations & lines call routines are the foollowing:

>>From drivers/ide/setup_pci.c
ide_pci_setup_ports()-> ide_hwif_setup_dma()->
ide_get_or_set_dma_base()-> simplex_stat = hwif->INB(dma_base +
2);[line:250]-> (to be continued)
Next to include/asm-ppc/io.h:
(continue from preview)-> __do_in_asm(inb,"lbzx")[line:309]-> (to be
continued)
Next to ide/ide-iops.c:
(continue from preview)-> ide_inb()[line:38]-> (to be continued)
Next to include/asm-ppc/io.h:
(continue from preview)-> __do_in_asm(inb,"lbzx")[line:309]-> (to be
continued)

Next to arch/ppc/kernel/head_44x.S:
(continue from preview)->mtspr SPRN_SPRG0,
r10[line:469]->...->rfi[line:689]->CRITICAL_EXCEPTION(0x0200,
MachineCheck, MachineCheckException)[line:318],then
Then can't return, then code lists sa following:
471 /* Data TLB Error Interrupt */
472 START_EXCEPTION(DataTLBError)
-> 473 mtspr SPRN_SPRG0, r10 /* Save some working registers */
-> 474 mtspr SPRN_SPRG1, r11
-> ......
-> 685 /* Done...restore registers and get out of here.
-> 686 */
-> 687 mfspr r11, SPRN_SPRG7R
-> 688 mtcr r11
-> 689 mfspr r13, SPRN_SPRG5R
-> 690 mfspr r12, SPRN_SPRG4R
-> 691 mfspr r11, SPRN_SPRG1
-> 692 mfspr r10, SPRN_SPRG0
-> 693 rfi /* Force context change */

314 /* Machine Check Interrupt */
315 #ifdef CONFIG_440A
316 MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
317 #else
-> 318 CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
319 #endif
then when I steped into line 318, ' CRITICAL_EXCEPTION(0x0200,
MachineCheck, MachineCheckException)', the system would not continue
from here.
'

Stephen Yee wrote:

> Hi Mr. KylongMu & all,
> Have you solved the issues about PCI-IDE card?
> I also have tested two PCI-IDE cards and a PCI-SATA card with
> 2.6.13(packaged in AMCC CD) and 2.6.14(ELDK ) kernel on Yosemite
> board, this issues are the same with Mr. KylongMu. the PCI-SATA is
> work fine. but the two PCI-IDE cards, ITE8212 and PDC20269 failed, the
> panic message was similar with Mr. KylongMu. the attached file is the
> ITE8212 module driver OOPS log.
>
> would you please give me some advice about it?
> Thanks and Best regards,
> stephen
>
> KylongMu wrote:
>
> > Dear Denk,
> >
> > Thanks for your help; it makes my Yosemite run up! I'm try to add a
> > PCI-IDE
> >
> > Card on it. I test my Promise-PDC20268 card and AEC6280 (ATP865-B chip
> > type) card,
> >
> > Both of them all failed with same error, the boot message included in
> > the attachment.
> >
> > The kernel configure is based on the Yosemite_defconfig, add with:
> >
> > Device Drivers-->
> >
> > ATA/ATAPI/MFM/RLL support-->
> >
> > [*]AEC62XX Chipset support
> >
> > [*]PROMISE PDC202{68|69|70|71|75|76|77} SUPPORT
> >
> > Both of the PCI-IDE cards can work with X86PC+FEDORA4 configure, I
> > don’t know
> >
> > What cause them fail on Yosemite with final 2.6.14 kernel.
> >
> > About my 2.6.14 tree, I type with “cg-log –s” command it shows:
> >
> > 99a21389c2b0e55f30b6cf6550cb492b87dbaa3b Heiko Schocher 2005-11-11
> > 12:47 [PATCH] ppc32: fix Kernel Panic for PM82x Board with gcc-4.0.
> >
> > ff1df84b3c3154ffdb646941e1c70d17554e3042 Wolfgang Denk 2005-11-10
> > 00:41 Merge with /home/wd/git/linux-2.6/stefan_roese
> >
> > It only shows 2.6.14 on the kernel message, I don’t know why it
> > doesn’t show the message as you told.
> >
> > But it can work, and fixed the bugs on Yosemite.
> >
> > Cordially,
> >
> > Kylong Mu
> >
> >------------------------------------------------------------------------
> >
> >U-Boot 1.1.4 (Nov 11 2005 - 19:35:30)
> >
> >AMCC PowerPC 440EP Rev. B
> >Board: Yosemite - AMCC PPC440EP Evaluation Board
> > VCO: 1066 MHz
> > CPU: 533 MHz
> > PLB: 133 MHz
> > OPB: 66 MHz
> > EPB: 66 MHz
> > PCI: 66 MHz
> >I2C: ready
> >DRAM: 256 MB
> >FLASH: 64 MB
> >PCI: Bus Dev VenId DevId Class Int
> > 00 0c 1191 0009 0180 00
> >In: serial
> >Out: serial
> >Err: serial
> >Net: ppc_4xx_eth0, ppc_4xx_eth1
> >
> >Type "run flash_nfs" to mount root filesystem over NFS
> >
> >Hit any key to stop autoboot: 0
> >=> tftp 400000 uImage
> >ENET Speed is 100 Mbps - FULL duplex connection
> >Using ppc_4xx_eth0 device
> >TFTP from server 192.168.0.93; our IP address is 192.168.0.66
> >Filename 'uImage'.
> >Load address: 0x400000
> >Loading:
> #################################################################
> > #################################################################
> > #################################################################
> > ###########################################
> >done
> >Bytes transferred = 1217393 (129371 hex)
> >=> bootram
> >Unknown command 'bootram' - try 'help'
> >=> run bootram
> >## Booting image at 00400000 ...
> > Image Name: Linux-2.6.14
> > Image Type: PowerPC Linux Kernel Image (gzip compressed)
> > Data Size: 1217329 Bytes = 1.2 MB
> > Load Address: 00000000
> > Entry Point: 00000000
> > Verifying Checksum ... OK
> > Uncompressing Kernel Image ... OK
> >## Loading RAMDisk Image at fed40000 ...
> > Image Name: Yosemite Ramdisk
> > Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
> > Data Size: 17770706 Bytes = 16.9 MB
> > Load Address: 00000000
> > Entry Point: 00000000
> > Verifying Checksum ... OK
> > Loading Ramdisk to 0ee47000, end 0ff398d2 ... OK
> >Linux version 2.6.14 (root@dxp) (gcc version 4.0.0) #7 Sun Nov 13
> 21:59:01 CST 2005
> >AMCC PowerPC 440EP Yosemite Platform
> >Built 1 zonelists
> >Kernel command line: ramdisk_size=49152 root=/dev/ram rw
> ip=192.168.0.66:192.168.0.93::255.255.255.0:yosemite:eth0:off panic=1
> console=ttyS0,115200
> >PID hash table entries: 2048 (order: 11, 32768 bytes)
> >Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> >Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> >Memory: 239616k available (1860k kernel code, 596k data, 140k init,
> 0k highmem)
> >Mount-cache hash table entries: 512
> >checking if image is initramfs...it isn't (no cpio magic); looks like
> an initrd
> >softlockup thread 0 started up.
> >Freeing initrd memory: 17354k freed
> >NET: Registered protocol family 16
> >PCI: Probing PCI hardware
> >usbcore: registered new driver usbfs
> >usbcore: registered new driver hub
> >SCSI subsystem initialized
> >io scheduler noop registered
> >io scheduler anticipatory registered
> >io scheduler deadline registered
> >io scheduler cfq registered
> >usbmon: debugfs is not available
> >ppc-soc-ohci ppc-soc-ohci.0: USB Host Controller
> >ppc-soc-ohci ppc-soc-ohci.0: new USB bus registered, assigned bus
> number 1
> >ppc-soc-ohci ppc-soc-ohci.0: irq 40, io mem 0xef601000
> >usb usb1: Product: USB Host Controller
> >usb usb1: Manufacturer: Linux 2.6.14 ohci_hcd
> >usb usb1: SerialNumber: PPC-SOC USB
> >hub 1-0:1.0: USB hub found
> >hub 1-0:1.0: 2 ports detected
> >Initializing USB Mass Storage driver...
> >usbcore: registered new driver usb-storage
> >USB Mass Storage support registered.
> >pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
> >usbcore: registered new driver pegasus
> >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> >serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
> >serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
> >RAMDISK driver initialized: 16 RAM disks of 49152K size 1024 blocksize
> >PPC 4xx OCP EMAC driver, version 3.53
> >mal0: initialized, 4 TX channels, 2 RX channels
> >zmii0: bridge in RMII mode
> >eth0: emac0, MAC 00:10:ec:00:87:40
> >eth0: found Generic MII PHY (0x01)
> >eth1: emac1, MAC 00:10:ec:00:87:47
> >eth1: found Generic MII PHY (0x03)
> >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> >ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> >Data machine check in kernel mode.
> >PLB0: BEAR=0x0000000000000000 ACR= 0x00000000 BESR= 0xfffff7ff
> >POB0: BEAR=0xc27e3194ffffffff BESR0=0x00000000 BESR1=0x00000000
> >OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
> >Oops: machine check, sig: 7 [#1]
> >NIP: 00000000 LR: C0263628 SP: CFF41F40 REGS: c0271f50 TRAP: 0202 Not
> tainted
> >MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
> >TASK = c04f8b10[1] 'swapper' THREAD: cff40000
> >Last syscall: 120
> >GPR00: FDFFEF02 CFF41F40 C04F8B10 C04FC000 C026C6B4 C04FC000 00000009
> CFF41EF4
> >GPR08: C04F9F70 00000000 00004000 C0270000 24254322 61000408 0FFB6800
> 00000001
> >GPR16: 00800000 0FFCEAD4 FFFFFFFF 00000000 007FFF00 0FFB1210 00000003
> 00000002
> >GPR24: C01D0000 C01D0000 C0270000 C01D0000 C0270000 C0223E10 C026C6B4
> C04FC000
> >NIP [00000000] 0x0
> >LR [c0263628] aec62xx_init_one+0x38/0x48
> >Call trace:
> > [c0263628] aec62xx_init_one+0x38/0x48
> > [c02649b8] ide_scan_pcidev+0x68/0xb0
> > [c0264a34] ide_scan_pcibus+0x34/0xe8
> > [c026492c] ide_init+0x68/0x8c
> > [c00013ac] init+0xb4/0x254
> > [c00046c0] kernel_thread+0x48/0x64
> >Data machine check in kernel mode.
> >PLB0: BEAR=0x0000000000000000 ACR= 0x00000000 BESR= 0xfffff7ff
> >POB0: BEAR=0xc27e3194ffffffff BESR0=0x00000000 BESR1=0x00000000
> >OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
> >Oops: machine check, sig: 7 [#2]
> >NIP: 00000000 LR: C000235C SP: C0271E70 REGS: c0271f50 TRAP: 0202 Not
> tainted
> >MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
> >TASK = c04f8b10[1] 'swapper' THREAD: cff40000
> >Last syscall: 120
> >GPR00: 08000000 C0271E70 C04F8B10 C0271E80 00001568 FFFFFFFF C0270000
> 00004000
> >GPR08: C0270000 C000235C 00021002 C00039E8 C04F8CD8 61000408 0FFB6800
> 00000001
> >GPR16: 00800000 0FFCEAD4 FFFFFFFF 00000000 007FFF00 0FFB1210 00000003
> 00000002
> >GPR24: C01D0000 C01D0000 C0270000 C01D0000 C0270000 C0223E10 00000007
> C0271F50
> >NIP [00000000] 0x0
> >LR [c000235c] ret_from_except+0x0/0x18
> >Kernel panic - not syncing: Attempted to kill init!
> > <0>Rebooting in 1 seconds..
> >
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Linuxppc-embedded mailing list
> >[email-masked]
> >https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
>
>
>
>
>
>------------------------------------------------------------------------
>
>[email-masked]:/lib/modules/2.6.13/kernel/drivers/ide/pci# insmod it821x.ko
>T8212: IDE controller at PCI slot 0000:00:0c.0
>IT8212: chipset revision 17
>it8212: forcing bypass mode.
>it821x: controller in pass through mode.
>IT8212: 100% native mode on irq 25
>Data machine check in kernel mode.
>PLB0: BEAR=0x0000000000000000 ACR=  0x00000000 BESR= 0xfffbffbf
>POB0: BEAR=0xc27e3194fffbffff BESR0=0x00000000 BESR1=0x00000000
>OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
>Oops: machine check, sig: 7 [#1]
>NIP: 00000000 LR: C0133138 SP: CF49DD50 REGS: c02c8f50 TRAP: 0202    Not tainted
>MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
>TASK = c0295b90[184] 'insmod' THREAD: cf49c000
>Last syscall: 128
>GPR00: FDFFEFD2 CF49DD50 C0295B90 00000000 00000060 FDFEE004 00000002 CF49DD38
>GPR08: 00000000 C02C0000 00000008 FDFEE004 00000000 10019538 C02D5B38 C02D5B38
>GPR16: C02D5B38 00000019 00000000 C02D5B38 C02D5B38 C0565000 CF49DDE8 C0565000
>GPR24: D102F8D2 C0565000 00000000 0000FFD0 D102F8B0 40000000 C02D5B38 C02D5B38
>NIP [00000000] 0x0
>LR [c0133138] ide_pci_setup_ports+0x61c/0x718
>Call trace:
> [c0133450] do_ide_setup_pci_device+0x21c/0x46c
> [c01336c0] ide_setup_pci_device+0x20/0x9c
> [d102f574] it821x_init_one+0x24/0x38 [it821x]
> [c00f1af4] pci_device_probe+0x80/0xa0
> [c010a880] driver_probe_device+0x50/0xf4
> [c010aa88] __driver_attach+0x84/0xc4
> [c0109e14] bus_for_each_dev+0x54/0x98
> [c010aaec] driver_attach+0x24/0x34
> [c010a388] bus_add_driver+0x88/0x158
> [c010b004] driver_register+0x38/0x4c
> [c00f18f4] pci_register_driver+0x7c/0x8c
> [c0133864] ide_pci_register_driver+0x54/0x6c
> [d102f5dc] it821x_ide_init+0x54/0x328 [it821x]
> [c003514c] sys_init_module+0x230/0x33c
> [c0001c74] ret_from_syscall+0x0/0x48
>Data machine check in kernel mode.
>PLB0: BEAR=0x0000000000000000 ACR=  0x00000000 BESR= 0xfffbffbf
>POB0: BEAR=0xc27e3194fffbffff BESR0=0x00000000 BESR1=0x00000000
>OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
>Oops: machine check, sig: 7 [#2]
>NIP: 00000000 LR: C000237C SP: C02C8E70 REGS: c02c8f50 TRAP: 0202    Not tainted
>MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
>TASK = c0295b90[184] 'insmod' THREAD: cf49c000
>Last syscall: 128
>GPR00: 08000000 C02C8E70 C0295B90 C02C8E80 00001E34 FFFFFFFF C0230000 C0237244
>GPR08: C0230000 C000237C 00021002 C0003774 C0295D58 10019538 C02D5B38 C02D5B38
>GPR16: C02D5B38 00000019 00000000 C02D5B38 C02D5B38 C0565000 CF49DDE8 C0565000
>GPR24: D102F8D2 C0565000 00000000 0000FFD0 D102F8B0 40000000 C02C8F50 00000007
>NIP [00000000] 0x0
>LR [c000237c] ret_from_except+0x0/0x18
>Data machine check in kernel mode.
>PLB0: BEAR=0x0000000000000000 ACR=  0x00000000 BESR= 0xfffbffbf
>POB0: BEAR=0xc27e3194fffbffff BESR0=0x00000000 BESR1=0x00000000
>OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
>Oops: machine check, sig: 7 [#3]
>NIP: 00000000 LR: C0004834 SP: CFA0DE30 REGS: c02c8f50 TRAP: 0202    Not tainted
>MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
>TASK = c02957f0[144] 'klogd' THREAD: cfa0c000
>Last syscall: 3
>GPR00: 220024E4 CFA0DE30 C02957F0 C0295B90 C0004834 C02C9200 C02C28C0 00000000
>GPR08: 165A2272 C02C0000 22044284 00000000 0000270B 1001D13C 7FEAB844 65786563
>GPR16: 10000000 7FEAB880 10010000 10000000 10010000 C02D0000 C02D0000 C029591C
>GPR24: 00000F5F C02CB500 C02CB500 C02C28C0 F8F6DF16 C0295450 C02957F0 00021000
>NIP [00000000] 0x0
>LR [c000483
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Linuxppc-embedded mailing list
>[email-masked]
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>

-- 
Stephen Yee(易松华)
Field Application Engineer
Beijing Microtech Research(BMR)
Tel: 86-755-88354481/2/3/5/6
Fax: 86-755-88354480
www.bmrtech.com

;bdiGDB configuration file for IBM 440EP Reference Board
; ------------------------------------------------------
;
; SDRAM setup based on boot ROM settings
;
[INIT]
;

[TARGET]
JTAGCLOCK   0                   ;use 16 MHz JTAG clock
CPUTYPE     440 		;the used target CPU type
SCANMISC    8                   ;IR length is 8 bits for 440GX/440EP
WAKEUP      500                  ;wakeup time after reset
STARTUP     RUN
BREAKMODE   SOFT      	        ;SOFT or HARD, HARD uses PPC hardware breakpoint
STEPMODE    JTAG                ;JTAG or HWBP, HWBP uses one or two hardware breakpoints

[HOST]
IP          192.168.7.88
;FILE        E:\cygwin\home\demo\mpc860\fibo.elf
FORMAT      ELF
DUMP        E:\temp\dump.bin
PROMPT      440EP>

[FLASH]

[REGS]
IDCR1	0x010	0x011	;SDRAM0_CFGADDR and SDRAM0_CFGDATA
IDCR2	0x012	0x013	;EBC0_CFGADDR   and EBC0_CFGDATA
IDCR3	0x014	0x015	;EBM0_CFGADDR   and EBM0_CFGDATA
IDCR4	0x016	0x017	;PPM0_CFGADDR   and PPM0_CFGDATA
IDCR5	0x00C	0x00D	;CPR0_CFGADDR   and CPR0_CFGDATA
IDCR6	0x00E	0x00F	;SDR0_CFGADDR   and SDR0_CFGDATA
DMM1    0xC0600000      ;Peripheral (should map to 0_EF60_0000)
FILE    $reg440ep.def

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14
# Wed Sep 13 23:32:35 2006
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
CONFIG_4xx=y
CONFIG_WANT_EARLY_SERIAL=y

#
# IBM 4xx options
#
# CONFIG_BAMBOO is not set
# CONFIG_EBONY is not set
# CONFIG_LUAN is not set
# CONFIG_OCOTEA is not set
# CONFIG_YELLOWSTONE is not set
CONFIG_YOSEMITE=y
CONFIG_440EP=y
CONFIG_440=y
CONFIG_IBM440EP_ERR42=y
CONFIG_IBM_OCP=y
CONFIG_PPC4xx_DMA=y
CONFIG_PPC4xx_EDMA=y
CONFIG_PPC_GEN550=y
CONFIG_NOT_COHERENT_CACHE=y

#
# Platform options
#
# CONFIG_PC_KEYBOARD is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
CONFIG_HIGHMEM_START=0xfe000000
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_KERNEL_START_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_TASK_SIZE=0x80000000
# CONFIG_CONSISTENT_START_BOOL is not set
CONFIG_CONSISTENT_START=0xff100000
# CONFIG_CONSISTENT_SIZE_BOOL is not set
CONFIG_CONSISTENT_SIZE=0x00200000
# CONFIG_BOOT_LOAD_BOOL is not set
CONFIG_BOOT_LOAD=0x01000000

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_NETLINK is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_YOSEMITE=y
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_SATA_SIL24=y
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Macintosh device drivers
#

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_EMAC=y
CONFIG_IBM_EMAC_RXB=64
CONFIG_IBM_EMAC_TXB=8
CONFIG_IBM_EMAC_POLL_WEIGHT=32
CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_EMAC_PHY_RX_CLK_FIX is not set
# CONFIG_IBM_EMAC_DEBUG is not set
CONFIG_IBM_EMAC_ZMII=y
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_BIG_ENDIAN=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_KGDB is not set
# CONFIG_XMON is not set
CONFIG_BDI_SWITCH=y
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_PPC_OCP=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#
ksymoops 2.4.11 on i686 2.4.21-4.EL.  Options used
     -V (default)
     -K (default)
     -L (default)
     -O (default)
     -m ./System.map (specified)

Oops: machine check, sig: 7 [#1]
NIP: 00000000 LR: C01567A8 SP: C059FE80 REGS: c02bbf50 TRAP: 0202    Not tainted
Using defaults from ksymoops -t elf32-little -a unknown
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
TASK = c054bb10[1] 'swapper' THREAD: c059e000
GPR00: FDFFEFD2 C059FE80 C054BB10 00000000 00000060 FDFEE004 00000002 C059FE68
GPR08: FFFF0008 C02C0000 00000008 C059FE90 00001A1E 00000000 C02C8EF8 C02C8EF8
GPR16: 00000019 00000000 C02C8EF8 C02C8EF8 00000000 C059FF38 C054F800 C02B63FE
GPR24: C054F800 00000000 C054F800 C02B63DC 0000FFD0 40000000 C02C9C88 C059FE80
Call trace:
Warning (Oops_read): Code line not seen, dumping what data is available

>>???; 00000000 Before first symbol

>>GPR9; c02c0000 <__log_buf+91c/401c>
>>GPR14; c02c8ef8 <ide_hwifs+0/3640>
>>GPR15; c02c8ef8 <ide_hwifs+0/3640>
>>GPR18; c02c8ef8 <ide_hwifs+0/3640>
>>GPR19; c02c8ef8 <ide_hwifs+0/3640>
>>GPR23; c02b63fe <pdcnew_chipsets+5a/188>
>>GPR27; c02b63dc <pdcnew_chipsets+38/188>
>>GPR30; c02c9c88 <ide_hwifs+d90/3640>

Oops: machine check, sig: 7 [#2]
NIP: 00000000 LR: C000241C SP: C02BBE40 REGS: c02bbf50 TRAP: 0202    Not tainted
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
TASK = c054bb10[1] 'swapper' THREAD: c059e000
GPR00: 08000000 C02BBE40 C054BB10 C02BBE50 0000162E FFFFFFFF C0260000 C025A324
GPR08: C0260000 C000241C 00021002 C0003A68 C054BCD8 00000000 C02C8EF8 C02C8EF8
GPR16: 00000019 00000000 C02C8EF8 C02C8EF8 00000000 C059FF38 C054F800 C02B63FE
GPR24: C054F800 00000000 C054F800 C02B63DC C02BBF50 00000007 C021BB10 C02BBF00
Kernel panic - not syncing: Attempted to kill init!
Warning (Oops_read): Code line not seen, dumping what data is available

>>???; 00000000 Before first symbol

>>GPR1; c02bbe40 <exception_stack_bottom+1e40/2000>
>>GPR3; c02bbe50 <exception_stack_bottom+1e50/2000>
>>GPR6; c0260000 <nlmsvc_procedures+a4/360>
>>GPR7; c025a324 <console_printk+0/10>
>>GPR8; c0260000 <nlmsvc_procedures+a4/360>
>>GPR9; c000241c <ret_from_except+0/18>
>>GPR11; c0003a68 <timer_interrupt+0/258>
>>GPR14; c02c8ef8 <ide_hwifs+0/3640>
>>GPR15; c02c8ef8 <ide_hwifs+0/3640>
>>GPR18; c02c8ef8 <ide_hwifs+0/3640>
>>GPR19; c02c8ef8 <ide_hwifs+0/3640>
>>GPR23; c02b63fe <pdcnew_chipsets+5a/188>
>>GPR27; c02b63dc <pdcnew_chipsets+38/188>
>>GPR28; c02bbf50 <exception_stack_bottom+1f50/2000>
>>GPR30; c021bb10 <__func__.3+c28/238c4>
>>GPR31; c02bbf00 <exception_stack_bottom+1f00/2000>

2 warnings issued.  Results may not be reliable.
U-Boot 1.1.4 (Nov 29 2005 - 14:21:14)

AMCC PowerPC 440EP Rev. B
Board: Yosemite - AMCC PPC440EP Evaluation Board
        VCO: 1066 MHz
        CPU: 533 MHz
        PLB: 133 MHz
        OPB: 66 MHz
        EPB: 66 MHz
        PCI: 66 MHz
I2C:   ready
DRAM:  256 MB
FLASH: 64 MB
PCI:   Bus Dev VenId DevId Class Int
        00  0c  105a  4d69  0180  0e
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0
=> tftp 0x8000000 ppc/uImage_2614
ENET Speed is 100 Mbps - FULL duplex connection
Using ppc_4xx_eth0 device
TFTP from server 192.168.7.88; our IP address is 192.168.7.67
Filename 'ppc/uImage_2614'.
Load address: 0x8000000
Loading: #################################################################
         #################################################################
         #################################################################
         #############################################################
done
Bytes transferred = 1305907 (13ed33 hex)
=> bootm
## Booting image at 08000000 ...
   Image Name:   Linux-2.6.14
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1305843 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.6.14 (root@shyi) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.107.6
AMCC PowerPC 440EP Yosemite Platform
Built 1 zonelists
Kernel command line: console=ttyS0,9600,8n1 ip=bootp root=/dev/nfs
PID hash table entries: 2048 (order: 11, 32768 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256640k available (2128k kernel code, 616k data, 148k init, 0k highmem)
Mount-cache hash table entries: 512
softlockup thread 0 started up.
NET: Registered protocol family 16
PCI: Probing PCI hardware
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SCSI subsystem initialized
usbmon: debugfs is not available
ppc-soc-ohci ppc-soc-ohci.0: USB Host Controller
ppc-soc-ohci ppc-soc-ohci.0: new USB bus registered, assigned bus number 1
ppc-soc-ohci ppc-soc-ohci.0: irq 40, io mem 0xef601000
usb usb1: Product: USB Host Controller
usb usb1: Manufacturer: Linux 2.6.14 ohci_hcd
usb usb1: SerialNumber: PPC-SOC USB
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPC 4xx OCP EMAC driver, version 3.53
mal0: initialized, 4 TX channels, 2 RX channels
zmii0: bridge in RMII mode
eth0: emac0, MAC 00:10:ec:00:9b:98
eth0: found Generic MII PHY (0x01)
eth1: emac1, MAC 00:00:00:00:00:00
eth1: found Generic MII PHY (0x03)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20269: IDE controller at PCI slot 0000:00:0c.0
PDC20269: chipset revision 2
PDC20269: ROM enabled at 0x000dc000
PDC20269: 100% native mode on irq 25
Data machine check in kernel mode.
PLB0: BEAR=0x0000000000000000 ACR=  0x00000000 BESR= 0xffffffff
POB0: BEAR=0xc27e3194ffffffbf BESR0=0x00000000 BESR1=0x00000000
OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
Oops: machine check, sig: 7 [#1]
PREEMPT
NIP: 00000000 LR: C01567A8 SP: C059FE80 REGS: c02bbf50 TRAP: 0202    Not tainted
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
TASK = c054bb10[1] 'swapper' THREAD: c059e000
Last syscall: 120
GPR00: FDFFEFD2 C059FE80 C054BB10 00000000 00000060 FDFEE004 00000002 C059FE68
GPR08: FFFF0008 C02C0000 00000008 C059FE90 00001A1E 00000000 C02C8EF8 C02C8EF8
GPR16: 00000019 00000000 C02C8EF8 C02C8EF8 00000000 C059FF38 C054F800 C02B63FE
GPR24: C054F800 00000000 C054F800 C02B63DC 0000FFD0 40000000 C02C9C88 C059FE80
NIP [00000000] 0x0
LR [c01567a8] ide_pci_setup_ports+0x630/0x72c
Call trace:
 [c0156650] ide_pci_setup_ports+0x4d8/0x72c
 [c0156ac8] do_ide_setup_pci_device+0x224/0x478
 [c0156d40] ide_setup_pci_device+0x24/0xa4
 [c02acfc0] init_setup_pdcnew+0x18/0x30
 [c02ad160] pdc202new_init_one+0x38/0x50
 [c02adbc0] ide_scan_pcidev+0x84/0xcc
 [c02adc38] ide_scan_pcibus+0x30/0xe4
 [c02adb14] ide_init+0x6c/0x94
 [c000141c] init+0xc4/0x294
 [c0004ab0] kernel_thread+0x48/0x64
Data machine check in kernel mode.
PLB0: BEAR=0x0000000000000000 ACR=  0x00000000 BESR= 0xffffffff
POB0: BEAR=0xc27e3194ffffffbf BESR0=0x00000000 BESR1=0x00000000
OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
Oops: machine check, sig: 7 [#2]
PREEMPT
NIP: 00000000 LR: C000241C SP: C02BBE40 REGS: c02bbf50 TRAP: 0202    Not tainted
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
TASK = c054bb10[1] 'swapper' THREAD: c059e000
Last syscall: 120
GPR00: 08000000 C02BBE40 C054BB10 C02BBE50 0000162E FFFFFFFF C0260000 C025A324
GPR08: C0260000 C000241C 00021002 C0003A68 C054BCD8 00000000 C02C8EF8 C02C8EF8
GPR16: 00000019 00000000 C02C8EF8 C02C8EF8 00000000 C059FF38 C054F800 C02B63FE
GPR24: C054F800 00000000 C054F800 C02B63DC C02BBF50 00000007 C021BB10 C02BBF00
NIP [00000000] 0x0
LR [c000241c] ret_from_except+0x0/0x18
Kernel panic - not syncing: Attempted to kill init!
 <0>Rebooting in 180 seconds..