* how to cross-compile netperf.
@ 2006-12-11 10:07 Ming Liu
2006-12-11 11:24 ` Wolfgang Grandegger
0 siblings, 1 reply; 4+ messages in thread
From: Ming Liu @ 2006-12-11 10:07 UTC (permalink / raw)
To: linuxppc-embedded
Dear all,
Maybe my question is not proper for this maillist but I really see some
friends who are using netperf to measure the netowrk performance from this
maillist. So I ask for help here.
Could anyone please tell me how to cross-compile the Netperf which could be
run on my PowerPC 405 processor? I cannot find a detailed explanation from
the manual. After the downloading and untaring the package, I use the
command "./configure --host ppc CC=powerpc-405-linux-gnu-gcc". However
unfortunately it doesn't work and error " checking whether setpgrp takes no
argument... configure:error: cannot check setpgrp when cross compiling"
appears. My host system is X86_64 PC with linux OS and my target system is
PowerPC 405(Xilinx Virtex 4 FPGA) with linux too(embedded Ml403 board from
Xilinx company). In my condition, which arguments shall I specify?
If anyone can help, I wll really appreciate a lot.
Thanks a lot.
BR
Ming
_________________________________________________________________
享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: how to cross-compile netperf.
2006-12-11 10:07 how to cross-compile netperf Ming Liu
@ 2006-12-11 11:24 ` Wolfgang Grandegger
2006-12-11 14:01 ` Ming Liu
2006-12-11 14:26 ` Ming Liu
0 siblings, 2 replies; 4+ messages in thread
From: Wolfgang Grandegger @ 2006-12-11 11:24 UTC (permalink / raw)
To: Ming Liu; +Cc: linuxppc-embedded
Ming Liu wrote:
> Dear all,
> Maybe my question is not proper for this maillist but I really see some
> friends who are using netperf to measure the netowrk performance from
> this maillist. So I ask for help here.
> Could anyone please tell me how to cross-compile the Netperf which could
> be run on my PowerPC 405 processor? I cannot find a detailed explanation
> from the manual. After the downloading and untaring the package, I use
> the command "./configure --host ppc CC=powerpc-405-linux-gnu-gcc".
> However unfortunately it doesn't work and error " checking whether
> setpgrp takes no argument... configure:error: cannot check setpgrp when
> cross compiling" appears. My host system is X86_64 PC with linux OS and
> my target system is PowerPC 405(Xilinx Virtex 4 FPGA) with linux
> too(embedded Ml403 board from Xilinx company). In my condition, which
> arguments shall I specify?
> If anyone can help, I wll really appreciate a lot.
$ echo "ac_cv_func_setpgrp_void=yes" > config.cache
$ ./configure --host ppc CC=powerpc-405-linux-gnu-gcc --config-cache
Wolfgang.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: how to cross-compile netperf.
2006-12-11 11:24 ` Wolfgang Grandegger
@ 2006-12-11 14:01 ` Ming Liu
2006-12-11 14:26 ` Ming Liu
1 sibling, 0 replies; 4+ messages in thread
From: Ming Liu @ 2006-12-11 14:01 UTC (permalink / raw)
To: wg; +Cc: linuxppc-embedded
Dear Wolfgang,
Yes! It helps.
Thanks so much for your kindly help.
BR
Ming
>From: Wolfgang Grandegger <wg@grandegger•com>
>To: Ming Liu <eemingliu@hotmail•com>
>CC: linuxppc-embedded@ozlabs•org
>Subject: Re: how to cross-compile netperf.
>Date: Mon, 11 Dec 2006 12:24:45 +0100
>
>Ming Liu wrote:
> > Dear all,
> > Maybe my question is not proper for this maillist but I really see some
> > friends who are using netperf to measure the netowrk performance from
> > this maillist. So I ask for help here.
> > Could anyone please tell me how to cross-compile the Netperf which
could
> > be run on my PowerPC 405 processor? I cannot find a detailed
explanation
> > from the manual. After the downloading and untaring the package, I use
> > the command "./configure --host ppc CC=powerpc-405-linux-gnu-gcc".
> > However unfortunately it doesn't work and error " checking whether
> > setpgrp takes no argument... configure:error: cannot check setpgrp when
> > cross compiling" appears. My host system is X86_64 PC with linux OS and
> > my target system is PowerPC 405(Xilinx Virtex 4 FPGA) with linux
> > too(embedded Ml403 board from Xilinx company). In my condition, which
> > arguments shall I specify?
> > If anyone can help, I wll really appreciate a lot.
>
>$ echo "ac_cv_func_setpgrp_void=yes" > config.cache
>$ ./configure --host ppc CC=powerpc-405-linux-gnu-gcc --config-cache
>
>Wolfgang.
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: how to cross-compile netperf.
2006-12-11 11:24 ` Wolfgang Grandegger
2006-12-11 14:01 ` Ming Liu
@ 2006-12-11 14:26 ` Ming Liu
1 sibling, 0 replies; 4+ messages in thread
From: Ming Liu @ 2006-12-11 14:26 UTC (permalink / raw)
To: wg; +Cc: linuxppc-embedded
Dear Wolfgang,
By the Way, another problem now. If I transfer UDP packets from my PC to my
board as "netperf -H 192.168.0.5 -t UDP_STREAM -l 30", a problem happens on
my ML403 board and ppc 405 as:
BUG: soft lockup detected on CPU#0!
NIP: C015084C LR: C014D384 CTR: C015075C
REGS: c2d43a20 TRAP: 1001 Not tainted (2.6.16-rc5-g51645017-dirty)
MSR: 00029030 <EE,ME,IR,DR> CR: 24004028 XER: 20000000
TASK = c03c27b0[732] 'netserver' THREAD: c2d42000
GPR00: 00007F08 C2D43AD0 C03C27B0 C032F2D8 C032F000 C2D43BA0 00021030
0000000A
GPR08: C3359000 03362DDF C0270000 C4000000 003C2978
NIP [C015084C] XTemac_IntrSgHandler+0xf0/0x27c
LR [C014D384] xtenet_interrupt+0x20/0x34
Call Trace:
[C2D43AD0] [C306A620] 0xc306a620 (unreliable)
[C2D43B00] [C014D384] xtenet_interrupt+0x20/0x34
[C2D43B10] [C003BB30] handle_IRQ_event+0x54/0xa8
[C2D43B40] [C003BC5C] __do_IRQ+0xd8/0x148
[C2D43B70] [C0007588] do_IRQ+0x48/0x78
[C2D43B90] [C000343C] ret_from_except+0x0/0x18
[C2D43C50] [C014E568] SgRecvHandlerBH+0x124/0x434
[C2D43C90] [C0022688] tasklet_action+0x8c/0xd0
[C2D43CB0] [C00222CC] __do_softirq+0x64/0xe0
[C2D43CD0] [C0007608] do_softirq+0x50/0x74
[C2D43CF0] [C00223E8] irq_exit+0x38/0x48
[C2D43D00] [C00075A4] do_IRQ+0x64/0x78
[C2D43D20] [C000343C] ret_from_except+0x0/0x18
[C2D43DE0] [C003E0DC] filemap_nopage+0x178/0x378
[C2D43E20] [C004C394] __handle_mm_fault+0x550/0x100c
[C2D43E80] [C000A0E8] do_page_fault+0x35c/0x578
[C2D43F40] [C0003238] handle_page_fault+0xc/0x80
Instruction dump:
73a00040 41a20028 813f0138 807f0130 39290001 913f0138 83ff012c 388001f9
7fe903a6 38a00001 4bffffd0 800b0028 <0c000000> 4c00012c 812b0020 0c090000
If I specify the time length shorter, e.g. -l 5, it will not happened.
This never happens when using TCP.
Can anyone tell me what's the reason and how to solve this? thanks for your
helping.
BR
Ming
>From: Wolfgang Grandegger <wg@grandegger•com>
>To: Ming Liu <eemingliu@hotmail•com>
>CC: linuxppc-embedded@ozlabs•org
>Subject: Re: how to cross-compile netperf.
>Date: Mon, 11 Dec 2006 12:24:45 +0100
>
>Ming Liu wrote:
> > Dear all,
> > Maybe my question is not proper for this maillist but I really see some
> > friends who are using netperf to measure the netowrk performance from
> > this maillist. So I ask for help here.
> > Could anyone please tell me how to cross-compile the Netperf which
could
> > be run on my PowerPC 405 processor? I cannot find a detailed
explanation
> > from the manual. After the downloading and untaring the package, I use
> > the command "./configure --host ppc CC=powerpc-405-linux-gnu-gcc".
> > However unfortunately it doesn't work and error " checking whether
> > setpgrp takes no argument... configure:error: cannot check setpgrp when
> > cross compiling" appears. My host system is X86_64 PC with linux OS and
> > my target system is PowerPC 405(Xilinx Virtex 4 FPGA) with linux
> > too(embedded Ml403 board from Xilinx company). In my condition, which
> > arguments shall I specify?
> > If anyone can help, I wll really appreciate a lot.
>
>$ echo "ac_cv_func_setpgrp_void=yes" > config.cache
>$ ./configure --host ppc CC=powerpc-405-linux-gnu-gcc --config-cache
>
>Wolfgang.
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-12-11 14:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-11 10:07 how to cross-compile netperf Ming Liu
2006-12-11 11:24 ` Wolfgang Grandegger
2006-12-11 14:01 ` Ming Liu
2006-12-11 14:26 ` Ming Liu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox