Re: [PATCH 3/3] [POWERPC] Add PCI support for AMCC 440EPx (sequoia)

From: Valentine Barshak <vbarshak@ru•mvista.com>
To: Vitaly Bordug <vitb@kernel•crashing.org>
Cc: linuxppc-dev <linuxppc-dev@ozlabs•org>, Stefan Roese <sr@denx•de>
Subject: Re: [PATCH 3/3] [POWERPC] Add PCI support for AMCC 440EPx (sequoia)
Date: Wed, 05 Sep 2007 21:28:22 +0400	[thread overview]
Message-ID: <46DEE736.1000807@ru.mvista.com> (raw)
In-Reply-To: <20070825093001.4087.18160.stgit@localhost.localdomain>

Vitaly Bordug wrote:
> In fact, loosely move of arch/ppc bits, though regions are
> set up using values from ranges property. This also adds
> setup_indirect_pci_noremap() function to handle indirect
> PCI without one more ioremap.
> 
> Signed-off-by: Vitaly Bordug <vitb@kernel•crashing.org>
> Signed-off-by: Stefan Roese <sr@denx•de>
> 
> ---
> 
>  arch/powerpc/platforms/44x/44x.h           |   28 ++++
>  arch/powerpc/platforms/44x/Makefile        |    4 +
>  arch/powerpc/platforms/44x/ppc440epx-pci.c |  192 ++++++++++++++++++++++++++++
>  arch/powerpc/platforms/44x/sequoia.c       |   14 ++
>  arch/powerpc/sysdev/indirect_pci.c         |   14 ++
>  include/asm-powerpc/pci-bridge.h           |    2 
>  6 files changed, 254 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
> index 42eabf8..d3845f9 100644
> --- a/arch/powerpc/platforms/44x/44x.h
> +++ b/arch/powerpc/platforms/44x/44x.h
> @@ -1,8 +1,36 @@
>  #ifndef __POWERPC_PLATFORMS_44X_44X_H
>  #define __POWERPC_PLATFORMS_44X_44X_H
> +#include <asm/pci-bridge.h>
> +
> +/* PCI support */
> +#define PPC4xx_PCI_CFGA_OFFSET		0
> +#define PPC4xx_PCI_CFGD_OFFSET		0x4
> +
> +#define PPC4xx_PCIL0_PMM0LA		0x000
> +#define PPC4xx_PCIL0_PMM0MA		0x004
> +#define PPC4xx_PCIL0_PMM0PCILA		0x008
> +#define PPC4xx_PCIL0_PMM0PCIHA		0x00C
> +#define PPC4xx_PCIL0_PMM1LA		0x010
> +#define PPC4xx_PCIL0_PMM1MA		0x014
> +#define PPC4xx_PCIL0_PMM1PCILA		0x018
> +#define PPC4xx_PCIL0_PMM1PCIHA		0x01C
> +#define PPC4xx_PCIL0_PMM2LA		0x020
> +#define PPC4xx_PCIL0_PMM2MA		0x024
> +#define PPC4xx_PCIL0_PMM2PCILA		0x028
> +#define PPC4xx_PCIL0_PMM2PCIHA		0x02C
> +#define PPC4xx_PCIL0_PTM1MS		0x030
> +#define PPC4xx_PCIL0_PTM1LA		0x034
> +#define PPC4xx_PCIL0_PTM2MS		0x038
> +#define PPC4xx_PCIL0_PTM2LA		0x03C
>  
>  extern u8 as1_readb(volatile u8 __iomem  *addr);
>  extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
>  extern void ppc44x_reset_system(char *cmd);
>  
> +#ifdef CONFIG_PCI
> +int ppc440epx_exclude_device(struct pci_controller *hose,
> +		u_char bus, u_char devfn);
> +int ppc440epx_add_bridge(struct device_node *dev);
> +#endif
> +
>  #endif /* __POWERPC_PLATFORMS_44X_44X_H */
> diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
> index 10ce674..d2a5278 100644
> --- a/arch/powerpc/platforms/44x/Makefile
> +++ b/arch/powerpc/platforms/44x/Makefile
> @@ -2,3 +2,7 @@ obj-$(CONFIG_44x)	:= misc_44x.o
>  obj-$(CONFIG_EBONY)	+= ebony.o
>  obj-$(CONFIG_BAMBOO) += bamboo.o
>  obj-$(CONFIG_SEQUOIA)	+= sequoia.o
> +
> +ifeq ($(CONFIG_PCI),y)
> +obj-$(CONFIG_440EPX)   += ppc440epx-pci.o
> +endif
> diff --git a/arch/powerpc/platforms/44x/ppc440epx-pci.c b/arch/powerpc/platforms/44x/ppc440epx-pci.c
> new file mode 100644
> index 0000000..bd4a352
> --- /dev/null
> +++ b/arch/powerpc/platforms/44x/ppc440epx-pci.c
> @@ -0,0 +1,192 @@
> +/*
> + * PPC44x PCI host support
> + *
> + * Vitaly Bordug <vitb@kernel•crashing.org>
> + * Stefan Roese <sr@denx•de>
> + *
> + * Based on arch/ppc sequoia pci bits, that are
> + * Copyright 2006-2007 DENX Software Engineering, Stefan Roese <sr@denx•de>
> + *
> + * Based on bamboo.c from Wade Farnsworth <wfarnsworth@mvista•com>
> + *      Copyright 2004 MontaVista Software Inc.
> + *      Copyright 2006 AMCC
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/pci.h>
> +#include <linux/delay.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +
> +#include <mm/mmu_decl.h>
> +
> +#include <asm/system.h>
> +#include <asm/atomic.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/prom.h>
> +
> +#include "44x.h"
> +
> +#undef DEBUG
> +
> +#ifdef DEBUG
> +#define DBG(x...) printk(x)
> +#else
> +#define DBG(x...)
> +#endif
> +
> +#ifdef CONFIG_PCI
> +
> +int ppc440epx_exclude_device(struct pci_controller *hose, u_char bus,
> +			   u_char devfn)
> +{
> +	if ((bus == hose->first_busno) && PCI_SLOT(devfn) == 0)
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +inline void pci_writel(void *pci_reg_base, u32 offset, unsigned int val)
> +{
> +	writel(val, pci_reg_base + offset);
> +}
> +
> +inline void pci_cfg_out(void *cfg, u32 offset, unsigned int value)
> +{
> +	out_le32((void *)((u32) cfg + offset), value);
> +}
> +
> +inline u32 pci_cfg_in(void *cfg, u32 offset)
> +{
> +	return in_le32((void *)((u32) cfg + offset));
> +}
> +
> +static void __init ppc440epx_setup_pci(struct pci_controller *hose,
> +				     void *pci_reg_base, void *pci_cfg_base)
> +{
> +	unsigned long memory_size, pci_size = 0;
> +	phys_addr_t pci_phys_base = 0;
> +	phys_addr_t pci_pci_base = 0;
> +	int i;
> +
> +	memory_size = total_memory;
> +
> +	/*
> +	 * 440EPx has single memory region, we'll use it to configure phb
> +	 */
> +	for (i = 0; i < 3; i++)
> +		if (hose->mem_resources[i].start) {
> +			pci_phys_base = hose->mem_resources[i].start;
> +			pci_pci_base = pci_phys_base - hose->pci_mem_offset;
> +			pci_size =
> +			    hose->mem_resources[i].end -
> +			    hose->mem_resources[i].start;
> +		}
> +
> +	if (pci_phys_base == 0) {
> +		printk(KERN_ERR "PHB bridge memory region is not defined!\n");
> +		return;
> +	}
> +
> +	pci_cfg_out(pci_cfg_base, PPC4xx_PCI_CFGA_OFFSET,
> +		    (pci_pci_base & 0xFFFFFFFF) | (PCI_COMMAND & 0xfc));
> +	pci_cfg_out(pci_cfg_base, PPC4xx_PCI_CFGD_OFFSET,
> +		    (pci_cfg_in(pci_cfg_base, PPC4xx_PCI_CFGD_OFFSET) |
> +		     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
> +
> +	/* Disable region first */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM0MA, 0);
> +
> +	/* PLB starting addr: 0x0000000180000000
> +	 * We need just lower word to get the things work
> +	 */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM0LA,
> +		   pci_phys_base & 0xFFFFFFFF);
> +
> +	/* PCI start addr, 0x80000000 (PCI Address) */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM0PCILA,
> +		   pci_pci_base & 0xFFFFFFFF);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM0PCIHA, 0);
> +
> +	/* Enable no pre-fetch, enable region */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM0MA,
> +		   ((0xffffffff - pci_size) | 0x01));
> +
> +	/* Disable region one */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1MA, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1LA, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1PCILA, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1PCIHA, 0);
> +
> +	/* Disable region two */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1MA, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1LA, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1PCILA, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PMM1PCIHA, 0);
> +
> +	/* Now configure the PCI->PLB windows, we only use PTM1
> +	 *
> +	 * For Inbound flow, set the window size to all available memory
> +	 * This is required because if size is smaller,
> +	 * then Eth/PCI DD would fail as PCI card not able to access
> +	 * the memory allocated by DD.
> +	 */
> +
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PTM1MS, 0);
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PTM1LA, 0);
> +
> +	memory_size = 1 << fls(memory_size - 1);
> +
> +	/* Size low + Enabled */
> +	pci_writel(pci_reg_base, PPC4xx_PCIL0_PTM1MS,
> +		   (0xffffffff - (memory_size - 1)) | 0x1);
> +	eieio();
> +}
> +
> +int __init ppc440epx_add_bridge(struct device_node *dev)
> +{
> +	int len;
> +	struct pci_controller *hose;
> +	const int *bus_range;
> +	int primary = 1;
> +	void *reg, *cfg;
> +
> +	/* Fetch host bridge registers address */
> +	reg = of_iomap(dev, 1);
> +	cfg = of_iomap(dev, 0);
> +
> +	DBG("Adding PCI host bridge %s\n reg %p cfg %p\n", dev->full_name, reg,
> +	    cfg);
> +
> +	/* Get bus range if any */
> +	bus_range = of_get_property(dev, "bus-range", &len);
> +	if (bus_range == NULL || len < 2 * sizeof(int))
> +		printk(KERN_WARNING "Can't get bus-range for %s, assume"
> +		       " bus 0\n", dev->full_name);
> +
> +	pci_assign_all_buses = 1;
> +	hose = pcibios_alloc_controller(dev);
> +	if (!hose)
> +		return -ENOMEM;
> +
> +	hose->first_busno = bus_range ? bus_range[0] : 0;
> +	hose->last_busno = bus_range ? bus_range[1] : 0xff;
> +
> +	setup_indirect_pci_noremap(hose, (u32) cfg,
> +				   (u32) (cfg + PPC4xx_PCI_CFGD_OFFSET), 0);
> +
> +	/* Interpret the "ranges" property */
> +	/* This also maps the I/O region and sets isa_io/mem_base */
> +	pci_process_bridge_OF_ranges(hose, dev, primary);
> +	ppc440epx_setup_pci(hose, reg, cfg);
> +
> +	return 0;
> +}
> +#endif
> diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
> index ca3c9cc..c3a638b 100644
> --- a/arch/powerpc/platforms/44x/sequoia.c
> +++ b/arch/powerpc/platforms/44x/sequoia.c
> @@ -52,6 +52,20 @@ static int __init sequoia_probe(void)
>  
>  static void __init sequoia_setup_arch(void)
>  {
> +#ifdef CONFIG_PCI
> +	struct device_node *np;
> +#endif
> +
> +	if (ppc_md.progress)
> +		ppc_md.progress("ppc44x_setup_arch()", 0);
> +
> +#ifdef CONFIG_PCI
> +	for (np = NULL; (np = of_find_compatible_node(np,
> +					"pci", "ibm, 440epx")) != NULL;)
> +		ppc440epx_add_bridge(np);
> +	ppc_md.pci_exclude_device = ppc440epx_exclude_device;
> +#endif
> +
>  }
>  
>  define_machine(sequoia) {
> diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
> index b5d0682..9dab751 100644
> --- a/arch/powerpc/sysdev/indirect_pci.c
> +++ b/arch/powerpc/sysdev/indirect_pci.c
> @@ -162,3 +162,17 @@ setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data, u32
>  	hose->ops = &indirect_pci_ops;
>  	hose->indirect_type = flags;
>  }
> +
> +/*
> + * For some reason, ioremap does not handle 2-nd way mapping well,
> + * causing system check while trying to access config space later
> + */
> +void __init
> +setup_indirect_pci_noremap(struct pci_controller *hose, u32 cfg_addr,
> +		u32 cfg_data, u32 flags)
> +{
> +	hose->cfg_addr = (void *)cfg_addr;
> +	hose->cfg_data = (void *)cfg_data;
> +	hose->ops = &indirect_pci_ops;
> +	hose->indirect_type = flags;
> +}
> diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
> index e909769..4bde6e5 100644
> --- a/include/asm-powerpc/pci-bridge.h
> +++ b/include/asm-powerpc/pci-bridge.h
> @@ -99,6 +99,8 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
>  
>  extern void setup_indirect_pci(struct pci_controller* hose,
>  			       u32 cfg_addr, u32 cfg_data, u32 flags);
> +extern void setup_indirect_pci_noremap(struct pci_controller *hose,
> +			       u32 cfg_addr, u32 cfg_data, u32 flags);
>  extern void setup_grackle(struct pci_controller *hose);
>  extern void __init update_bridge_resource(struct pci_dev *dev,
>  					  struct resource *res);
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs•org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

The patches seem to work fine on Sequoia, just
pci_iomap() function has to be fixed to support 64-bit resources.
I'll submit a couple of patches soon.
Thanks,
Valentine.