From: Valentine Barshak <vbarshak@ru•mvista.com>
To: Stefan Roese <sr@denx•de>
Cc: linuxppc-dev@ozlabs•org
Subject: Re: AMCC yosemite 440ep PCI slot doesn't work.
Date: Mon, 24 Sep 2007 15:20:12 +0400 [thread overview]
Message-ID: <46F79D6C.5070500@ru.mvista.com> (raw)
In-Reply-To: <200709241314.18123.sr@denx.de>
Stefan Roese wrote:
> On Monday 24 September 2007, Andrew Liu wrote:
>> By default, it is IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE
>
> And that should be correct for PCI interrupts.
>
>> I change it to IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE or
>> IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE.
>> It displays:
>> eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>> eth2: no IPv6 routers present
>> NETDEV WATCHDOG: eth2: transmit timed out
>> eth2: Transmit timeout, status 0c 0005 c07f media 10.
>> eth2: Tx queue start entry 4 dirty entry 0.
>> eth2: Tx descriptor 0 is 0008a05a. (queue head)
>> eth2: Tx descriptor 1 is 0008a04e.
>> eth2: Tx descriptor 2 is 0008a046.
>> eth2: Tx descriptor 3 is 0008a05a.
>> eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>>
>> and
>> root@localhost:/root> ifconfig eth2
>> eth2 Link encap:Ethernet HWaddr 00:0E:2E:7E:F5:E6
>> inet addr:128.224.149.13 Bcast:128.224.255.255 Mask:255.255.0.0
>> inet6 addr: fe80::20e:2eff:fe7e:f5e6/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:1000
>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>> Interrupt:25 Base address:0x6f00
>>
>>
>> and
>> root@localhost:/root> cat /proc/interrupts
>> CPU0
>> 2: 0 UIC0 Edge IBM IIC
>> 7: 0 UIC0 Edge IBM IIC
>> 10: 11961 UIC0 Edge MAL TX EOB
>> 11: 18471 UIC0 Edge MAL RX EOB
>> 25: 0 UIC0 Edge eth2
>> 32: 0 UIC1 Edge MAL SERR
>> 33: 0 UIC1 Edge MAL TX DE
>> 34: 0 UIC1 Edge MAL RX DE
>> 40: 32 UIC1 Edge ohci_hcd:usb1
>> 60: 0 UIC1 Edge EMAC
>> BAD: 0
>>
>>
>> Can PCI slot use level trigger?
>>
>> give me some advice.
This could be caused by misseting the IRQ_lEVEL flag in desc->status.
There have been a commit 4dc7b4b0405fd7320940849b6e31ea8ea68fd0df that
fixes the problem.
Thanks,
Valentine.
>
> Hmmm. Did you try an earlier Linux version too? For example 2.6.22 or even
> earlier? Please give it a try and let us know if the same problem occurs.
>
> Best regards,
> Stefan
>
> =====================================================================
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx•de
> =====================================================================
next prev parent reply other threads:[~2007-09-24 11:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-21 10:53 AMCC yosemite 440ep PCI slot doesn't work Andrew Liu
2007-09-21 15:14 ` Valentine Barshak
2007-09-24 9:34 ` Andrew Liu
2007-09-24 11:14 ` Stefan Roese
2007-09-24 11:20 ` Valentine Barshak [this message]
2007-09-25 2:05 ` Andrew Liu
2007-09-25 2:02 ` Andrew Liu
2007-09-25 5:18 ` Stefan Roese
2007-09-25 13:21 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46F79D6C.5070500@ru.mvista.com \
--to=vbarshak@ru$(echo .)mvista.com \
--cc=linuxppc-dev@ozlabs$(echo .)org \
--cc=sr@denx$(echo .)de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox