From: Marian Balakowicz <m8@semihalf•com>
To: linuxppc-dev@ozlabs•org
Subject: [PATCH 04/15] [POWERPC] CM5200 DTS
Date: Sun, 07 Oct 2007 13:20:50 +0200 [thread overview]
Message-ID: <4708C112.9020506@semihalf.com> (raw)
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add device tree source file for CM5200 board.
Signed-off-by Marian Balakowicz <m8@semihalf•com>
Signed-off-by: Jan Wrobel <wrr@semihalf•com>
---
cm5200.dts | 284 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 284 insertions(+)
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
new file mode 100644
index 0000000..96d2ee4
--- /dev/null
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -0,0 +1,284 @@
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Modified for CM5200 by Jan Wrobel <wrr@semihalf•com>
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab•ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "cm5200";
+ compatible = "fsl,cm5200\0generic-mpc5200";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ compatible = "mpc5200";
+ revision = ""; // from bootloader
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200b-pic\0mpc5200-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <0>;
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ has-wdt;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <1>;
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <2>;
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <3>;
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <4>;
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <5>;
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@660 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <6>;
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@670 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <7>;
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200b-rtc\0mpc5200-rtc";
+ device_type = "rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200b-gpio\0mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio-wkup@c00 {
+ compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ spi@f00 {
+ device_type = "spi";
+ compatible = "mpc5200b-spi\0mpc5200-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ bestcomm@1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200b-xlb\0mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ cell-index = <0>;
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2200 { // PSC2
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <1>; // Logical port assignment
+ cell-index = <1>;
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2400 { // PSC3
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <2>; // Logical port assignment
+ cell-index = <2>;
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2c00 { // PSC6
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <5>; // Logical port assignment
+ cell-index = <5>;
+ reg = <2c00 100>;
+ interrupts = <2 4 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec\0mpc5200-fec";
+ reg = <3000 800>;
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
+ cell-index = <1>;
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ device_type = "sram";
+ compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
+ reg = <8000 4000>;
+ };
+
+ flash@c000000 {
+ device_type = "rom";
+ compatible = "direct-mapped";
+ reg = <0c000000 02000000>;
+ probe-type = "CFI";
+ bank-width = <2>;
+ partitions = <00000000 00060000
+ 00060000 00020000
+ 00080000 00020000
+ 000a0000 00020000
+ 000c0000 00200000
+ 002c0000 01b40000
+ 01e00000 00200000>;
+ partition-names = "uboot\0env\0redund_env\0dtb\0kernel\0rootfs\0config";
+ };
+ };
+};
next prev parent reply other threads:[~2007-10-07 11:21 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-06 10:12 [PATCH 00/15] [POWERPC] TQM5200, CM5200 and Motion-PRO support Marian Balakowicz
2007-10-07 11:15 ` [PATCH 01/15] [POWERPC] TQM5200 DTS Marian Balakowicz
2007-10-07 17:36 ` Grant Likely
2007-10-07 20:30 ` Wolfgang Denk
2007-10-17 11:10 ` Marian Balakowicz
2007-10-17 14:57 ` Grant Likely
2007-10-08 6:27 ` Grant Likely
2007-10-08 13:52 ` Kumar Gala
2007-10-07 11:18 ` [PATCH 02/15] [POWERPC] TQM5200 defconfig Marian Balakowicz
2007-10-07 11:19 ` [POWERPC 03/15] [POWERPC] TQM5200 board support Marian Balakowicz
2007-10-07 12:21 ` Stephen Rothwell
2007-10-08 6:21 ` Grant Likely
2007-10-08 7:44 ` Wolfgang Denk
2007-10-08 7:54 ` Grant Likely
2007-10-08 20:48 ` Grant Likely
2007-10-08 22:32 ` Wolfgang Denk
2007-10-08 22:37 ` Grant Likely
2007-10-17 11:24 ` Marian Balakowicz
2007-10-08 15:04 ` Scott Wood
2007-10-17 11:42 ` Marian Balakowicz
2007-10-17 15:33 ` Scott Wood
2007-10-07 11:20 ` Marian Balakowicz [this message]
2007-10-08 1:50 ` [PATCH 04/15] [POWERPC] CM5200 DTS David Gibson
2007-10-17 12:22 ` Marian Balakowicz
2007-10-17 14:59 ` Grant Likely
2007-10-18 0:22 ` David Gibson
2007-10-19 11:06 ` Marian Balakowicz
2007-10-07 11:22 ` [PATCH 05/15] [POWERPC] CM5200 defconfig Marian Balakowicz
2007-10-07 11:24 ` [PATCH 06/15] [POWERPC] CM5200 board support Marian Balakowicz
2007-10-07 12:29 ` Stephen Rothwell
2007-10-08 6:28 ` Grant Likely
2007-10-07 11:25 ` [PATCH 07/15] [POWERPC] Promess Motion-PRO DTS Marian Balakowicz
2007-10-08 1:53 ` David Gibson
2007-10-08 6:44 ` Grant Likely
2007-10-08 14:58 ` Scott Wood
2007-10-08 15:16 ` Grant Likely
2007-10-18 12:50 ` Wolfgang Grandegger
2007-10-18 12:54 ` David Gibson
2007-10-18 13:16 ` Grant Likely
2007-10-07 11:26 ` [PATCH 08/15] [POWERPC] Promess Motion-PRO defconfig Marian Balakowicz
2007-10-07 11:28 ` [PATCH 09/15] [POWERPC] Promess Motion-PRO board support Marian Balakowicz
2007-10-07 12:32 ` Stephen Rothwell
2007-10-08 6:45 ` Grant Likely
2007-10-07 11:30 ` [PATCH 10/15] [POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functions Marian Balakowicz
2007-10-08 6:47 ` Grant Likely
2007-10-07 11:31 ` [PATCH 11/15] [POWERPC] Motion-PRO: Add LED support Marian Balakowicz
2007-10-08 7:10 ` Grant Likely
2007-10-07 11:32 ` [PATCH 12/15] [POWERPC] Add mpc52xx_restart(), mpc52xx_halt(), mpc52xx_power_off() Marian Balakowicz
2007-10-08 7:15 ` Grant Likely
2007-10-08 13:56 ` Kumar Gala
2007-10-07 11:32 ` [PATCH 13/15] [POWERPC] Init restart/halt/power_off machine hooks for TQM5200 Marian Balakowicz
2007-10-07 11:35 ` [PATCH 14/15] [POWERPC] Init restart/halt/power_off machine hooks for CM5200 Marian Balakowicz
2007-10-07 11:36 ` [PATCH 15/15] [POWERPC] Init restart/halt/power_off machine hooks for Motion-PRO Marian Balakowicz
2007-10-08 7:16 ` [PATCH 00/15] [POWERPC] TQM5200, CM5200 and Motion-PRO support Grant Likely
2007-10-08 13:57 ` Kumar Gala
2007-10-09 9:08 ` Marian Balakowicz
2007-10-09 14:38 ` Grant Likely
2007-10-09 15:57 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4708C112.9020506@semihalf.com \
--to=m8@semihalf$(echo .)com \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox