Subject: Re: MontaVista 4.0.1 on Xilinx ML405 board

From: schardt <[email-masked]>
Date: Mon, 26 Nov 2007 08:12:34 +0100

lock up the location of the __log_buf in the System.map  and check if
errormessages are stored there in the memory.
check the console device. it must be /dev/ttyULx

Georg

[email-masked] wrote:
> We built a design for ML405 using EDK 9.1.02. EDK also 
> creates linux drivers for MontaVista Pro 4.0.1 (2.6.10).
> The drivers were copied to a clean copy of Pro 4.0.1 and the 
> kernel was built. When we downloaded the kernel to the target 
> and ran it, we got exception. We didn't get any messages on 
> the hyper terminal. 
> We used Tri-Mode Ethernet and UART lite.
> MontaVista checked the integration of EDK 8.2 with ML403. 
> Can you help ?
> _______________________________________________
> Linuxppc-embedded mailing list
> [email-masked]
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>   

-------------------------------------------------------------------
-------------------------------------------------------------------
Forschungszentrum Jülich GmbH
52425 Jülich

Sitz der Gesellschaft: Jülich
Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe
Geschäftsführung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Dr. Sebastian M. Schmidt
-------------------------------------------------------------------
-------------------------------------------------------------------