From: Clemens Koller <clemens.koller@anagramm•de>
To: Alessandro Zummo <alessandro.zummo@towertech•it>
Cc: rtc-linux@googlegroups•com, linuxppc-embedded@ozlabs•org
Subject: Re: DS1337 RTC on I2C broken.
Date: Wed, 28 Nov 2007 20:36:06 +0100 [thread overview]
Message-ID: <474DC326.6070209@anagramm.de> (raw)
In-Reply-To: <20071128194321.0804b3aa@i1501.lan.towertech.it>
[-- Attachment #1: Type: text/plain, Size: 1497 bytes --]
Alessandro Zummo schrieb:
> On Wed, 28 Nov 2007 19:25:00 +0100
> Clemens Koller <clemens.koller@anagramm•de> wrote:
>
>> Well, as already mentioned, I have problems to get my DS1337 RTC on I2C
>> on my MPC8540(ads like) PowerPC working properly on
>> latest 2.6.24-rc2-ge6a5c27f kernels. A paulus.git 2.6.21-rc5-g9a5ee4cc
>> as well as a 2.6.22-rc6-gb75ae860 is working fine.
>> (mainstream's console is broken, so cannot test these, yet.)
>>
>>
>> My guess is that the new rtc-lib's RTC_DRV_DS1307 support is still broken
>> and it also breaks the deprecated SENSORS_DS1337. :-(
>
> mmm. I've been told it should work ;)
>
>> Here is a snippet from my .config which is similar among my kernels.
>> CONFIG_GEN_RTC=y
>
> this one must be deselected.
>
>> CONFIG_SENSORS_DS1337=y
>> CONFIG_SENSORS_DS1374=y
>
> ditto.
>
>> DEV: registering device: ID = '0-0068'
>> bus i2c: add device 0-0068
>> bound device '0-0068' to driver 'ds1337'
>
> maybe the wrong driver is kicking in here.
> the fact that there is no rtc class
> related output in dmesg should and that
> there is no /dev/rtc0 could be a sign that the whole class
> is not going in.
>
> do you have full dmesg?
My current
.config as well as the dmesg is attached with your
suggested changes.
Regards,
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
[-- Attachment #2: dmesg-fail.txt --]
[-- Type: text/plain, Size: 15334 bytes --]
DEV: registering device: ID = 'tty47'
DEV: registering device: ID = 'tty48'
DEV: registering device: ID = 'tty49'
DEV: registering device: ID = 'tty50'
DEV: registering device: ID = 'tty51'
DEV: registering device: ID = 'tty52'
DEV: registering device: ID = 'tty53'
DEV: registering device: ID = 'tty54'
DEV: registering device: ID = 'tty55'
DEV: registering device: ID = 'tty56'
DEV: registering device: ID = 'tty57'
DEV: registering device: ID = 'tty58'
DEV: registering device: ID = 'tty59'
DEV: registering device: ID = 'tty60'
DEV: registering device: ID = 'tty61'
DEV: registering device: ID = 'tty62'
DEV: registering device: ID = 'tty63'
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Registering platform device 'serial8250'. Parent at platform
DEV: registering device: ID = 'serial8250'
bus platform: add device serial8250
DEV: registering device: ID = 'ttyS0'
DEV: registering device: ID = 'ttyS1'
DEV: registering device: ID = 'ttyS2'
DEV: registering device: ID = 'ttyS3'
bus platform: add driver serial8250
platform: Matched Device serial8250.0 with Driver serial8250
platform: Probing driver serial8250 with device serial8250.0
DEV: Unregistering device. ID = 'ttyS0'
device_create_release called for ttyS0
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
console [ttyS0] enabled
DEV: registering device: ID = 'ttyS0'
DEV: Unregistering device. ID = 'ttyS1'
device_create_release called for ttyS1
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
DEV: registering device: ID = 'ttyS1'
bound device 'serial8250.0' to driver 'serial8250'
platform: Bound Device serial8250.0 to Driver serial8250
platform: Matched Device serial8250 with Driver serial8250
platform: Probing driver serial8250 with device serial8250
bound device 'serial8250' to driver 'serial8250'
platform: Bound Device serial8250 to Driver serial8250
bus pci: add driver serial
loop: module loaded
bus platform: add driver fsl-gianfar_mdio
platform: Matched Device fsl-gianfar_mdio.-5 with Driver fsl-gianfar_mdio
platform: Probing driver fsl-gianfar_mdio with device fsl-gianfar_mdio.-5
DEV: registering device: ID = 'e0024520:00'
bus mdio_bus: add device e0024520:00
DEV: registering device: ID = 'e0024520:1f'
bus mdio_bus: add device e0024520:1f
Gianfar MII Bus: probed
bound device 'fsl-gianfar_mdio.-5' to driver 'fsl-gianfar_mdio'
platform: Bound Device fsl-gianfar_mdio.-5 to Driver fsl-gianfar_mdio
bus platform: add driver fsl-gianfar
platform: Matched Device fsl-gianfar.0 with Driver fsl-gianfar
platform: Probing driver fsl-gianfar with device fsl-gianfar.0
DEV: registering device: ID = 'eth0'
eth0: Gianfar Ethernet Controller Version 1.2, 00:d0:93:0e:4e:c4
eth0: Running with NAPI enabled
eth0: 256/256 RX/TX BD ring size
bound device 'fsl-gianfar.0' to driver 'fsl-gianfar'
platform: Bound Device fsl-gianfar.0 to Driver fsl-gianfar
platform: Matched Device fsl-gianfar.1 with Driver fsl-gianfar
platform: Probing driver fsl-gianfar with device fsl-gianfar.1
DEV: registering device: ID = 'eth1'
eth1: Gianfar Ethernet Controller Version 1.2, 00:d0:93:0e:4e:c5
eth1: Running with NAPI enabled
eth1: 256/256 RX/TX BD ring size
bound device 'fsl-gianfar.1' to driver 'fsl-gianfar'
platform: Bound Device fsl-gianfar.1 to Driver fsl-gianfar
platform: Matched Device fsl-gianfar.2 with Driver fsl-gianfar
platform: Probing driver fsl-gianfar with device fsl-gianfar.2
DEV: registering device: ID = 'eth2'
eth2: Gianfar Ethernet Controller Version 1.2, 00:d0:93:0e:4e:c6
eth2: Running with NAPI enabled
eth2: 256/256 RX/TX BD ring size
bound device 'fsl-gianfar.2' to driver 'fsl-gianfar'
platform: Bound Device fsl-gianfar.2 to Driver fsl-gianfar
bus mdio_bus: add driver Marvell 88E1101
bus mdio_bus: add driver Marvell 88E1112
bus mdio_bus: add driver Marvell 88E1111
mdio_bus: Matched Device e0024520:00 with Driver Marvell 88E1111
mdio_bus: Probing driver Marvell 88E1111 with device e0024520:00
bound device 'e0024520:00' to driver 'Marvell 88E1111'
mdio_bus: Bound Device e0024520:00 to Driver Marvell 88E1111
bus mdio_bus: add driver Marvell 88E1145
bus mdio_bus: add driver Marvell 88E1240
bus mdio_bus: add driver LXT970
bus mdio_bus: add driver LXT971
DEV: registering device: ID = 'dummy0'
device class 'scsi_disk': registering
bus scsi: add driver sd
bus pci: add driver sata_promise
pci: Matched Device 0000:00:12.0 with Driver sata_promise
pci: Probing driver sata_promise with device 0000:00:12.0
sata_promise 0000:00:12.0: version 2.11
scsi0 : sata_promise
DEV: registering device: ID = 'host0'
CLASS: registering class device: ID = 'host0'
class_uevent - name = host0
scsi1 : sata_promise
DEV: registering device: ID = 'host1'
CLASS: registering class device: ID = 'host1'
class_uevent - name = host1
scsi2 : sata_promise
DEV: registering device: ID = 'host2'
CLASS: registering class device: ID = 'host2'
class_uevent - name = host2
ata1: SATA max UDMA/133 mmio m4096@0x80000000 port 0x80000200 irq 18
ata2: SATA max UDMA/133 mmio m4096@0x80000000 port 0x80000280 irq 18
ata3: PATA max UDMA/133 mmio m4096@0x80000000 port 0x80000300 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHW2100BH, 00000012, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
DEV: registering device: ID = 'target0:0:0'
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2100B 0000 PQ: 0 ANSI: 5
DEV: registering device: ID = '0:0:0:0'
bus scsi: add device 0:0:0:0
scsi: Matched Device 0:0:0:0 with Driver sd
scsi: Probing driver sd with device 0:0:0:0
CLASS: registering class device: ID = '0:0:0:0'
class_uevent - name = 0:0:0:0
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
bound device '0:0:0:0' to driver 'sd'
scsi: Bound Device 0:0:0:0 to Driver sd
CLASS: registering class device: ID = '0:0:0:0'
class_uevent - name = 0:0:0:0
bound device '0000:00:12.0' to driver 'sata_promise'
pci: Bound Device 0000:00:12.0 to Driver sata_promise
bus pci: add driver pata_pdc2027x
usbmon: debugfs is not available
bus pci: add driver ehci_hcd
pci: Matched Device 0000:00:14.2 with Driver ehci_hcd
pci: Probing driver ehci_hcd with device 0000:00:14.2
ehci_hcd 0000:00:14.2: EHCI Host Controller
CLASS: registering class device: ID = 'usb_host1'
class_uevent - name = usb_host1
class_device_create_uevent called for usb_host1
ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:14.2: irq 20, io mem 0x81202000
ehci_hcd 0000:00:14.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
DEV: registering device: ID = 'usb1'
bus usb: add device usb1
usb: Matched Device usb1 with Driver usb
usb: Probing driver usb with device usb1
device class 'usb_endpoint': registering
DEV: registering device: ID = 'usbdev1.1_ep00'
usb usb1: configuration #1 chosen from 1 choice
DEV: registering device: ID = '1-0:1.0'
bus usb: add device 1-0:1.0
usb: Matched Device 1-0:1.0 with Driver hub
usb: Probing driver hub with device 1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
bound device '1-0:1.0' to driver 'hub'
usb: Bound Device 1-0:1.0 to Driver hub
DEV: registering device: ID = 'usbdev1.1_ep81'
DEV: registering device: ID = 'usbdev1.1'
bound device 'usb1' to driver 'usb'
usb: Bound Device usb1 to Driver usb
bound device '0000:00:14.2' to driver 'ehci_hcd'
pci: Bound Device 0000:00:14.2 to Driver ehci_hcd
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
bus of_platform: add driver ppc-of-ohci
bus pci: add driver ohci_hcd
pci: Matched Device 0000:00:14.0 with Driver ohci_hcd
pci: Probing driver ohci_hcd with device 0000:00:14.0
ohci_hcd 0000:00:14.0: OHCI Host Controller
CLASS: registering class device: ID = 'usb_host2'
class_uevent - name = usb_host2
class_device_create_uevent called for usb_host2
ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:14.0: irq 20, io mem 0x81200000
DEV: registering device: ID = 'usb2'
bus usb: add device usb2
usb: Matched Device usb2 with Driver usb
usb: Probing driver usb with device usb2
DEV: registering device: ID = 'usbdev2.1_ep00'
usb usb2: configuration #1 chosen from 1 choice
DEV: registering device: ID = '2-0:1.0'
bus usb: add device 2-0:1.0
usb: Matched Device 2-0:1.0 with Driver hub
usb: Probing driver hub with device 2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
bound device '2-0:1.0' to driver 'hub'
usb: Bound Device 2-0:1.0 to Driver hub
DEV: registering device: ID = 'usbdev2.1_ep81'
DEV: registering device: ID = 'usbdev2.1'
bound device 'usb2' to driver 'usb'
usb: Bound Device usb2 to Driver usb
bound device '0000:00:14.0' to driver 'ohci_hcd'
pci: Bound Device 0000:00:14.0 to Driver ohci_hcd
pci: Matched Device 0000:00:14.1 with Driver ohci_hcd
pci: Probing driver ohci_hcd with device 0000:00:14.1
ohci_hcd 0000:00:14.1: OHCI Host Controller
CLASS: registering class device: ID = 'usb_host3'
class_uevent - name = usb_host3
class_device_create_uevent called for usb_host3
ohci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:14.1: irq 20, io mem 0x81201000
DEV: registering device: ID = 'usb3'
bus usb: add device usb3
usb: Matched Device usb3 with Driver usb
usb: Probing driver usb with device usb3
DEV: registering device: ID = 'usbdev3.1_ep00'
usb usb3: configuration #1 chosen from 1 choice
DEV: registering device: ID = '3-0:1.0'
bus usb: add device 3-0:1.0
usb: Matched Device 3-0:1.0 with Driver hub
usb: Probing driver hub with device 3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
bound device '3-0:1.0' to driver 'hub'
usb: Bound Device 3-0:1.0 to Driver hub
DEV: registering device: ID = 'usbdev3.1_ep81'
DEV: registering device: ID = 'usbdev3.1'
bound device 'usb3' to driver 'usb'
usb: Bound Device usb3 to Driver usb
bound device '0000:00:14.1' to driver 'ohci_hcd'
pci: Bound Device 0000:00:14.1 to Driver ohci_hcd
Initializing USB Mass Storage driver...
bus usb: add driver usb-storage
usb 3-2: new low speed USB device using ohci_hcd and address 2
DEV: registering device: ID = '3-2'
bus usb: add device 3-2
usb: Matched Device 3-2 with Driver usb
usb: Probing driver usb with device 3-2
DEV: registering device: ID = 'usbdev3.2_ep00'
usb 3-2: configuration #1 chosen from 1 choice
DEV: registering device: ID = '3-2:1.0'
bus usb: add device 3-2:1.0
DEV: registering device: ID = 'usbdev3.2_ep81'
DEV: registering device: ID = 'usbdev3.2'
bound device '3-2' to driver 'usb'
usb: Bound Device 3-2 to Driver usb
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
bus type 'usb-serial' registered
bus usb: add driver usbserial
usbcore: registered new interface driver usbserial
bus usb-serial: add driver generic
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
bus usb: add driver usbserial_generic
usb: Matched Device 3-2:1.0 with Driver usbserial_generic
usb: Probing driver usbserial_generic with device 3-2:1.0
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
bus usb-serial: add driver ftdi_sio
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
bus usb: add driver ftdi_sio
usbcore: registered new interface driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
bus usb-serial: add driver pl2303
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
bus usb: add driver pl2303
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
DEV: registering device: ID = 'mice'
DEV: registering device: ID = 'psaux'
mice: PS/2 mouse device common for all mice
bus usb: add driver usbtouchscreen
usb: Matched Device 3-2:1.0 with Driver usbtouchscreen
usb: Probing driver usbtouchscreen with device 3-2:1.0
DEV: registering device: ID = 'input0'
input: TSC-10 DM as /devices/pci0000:00/0000:00:14.1/usb3/3-2/3-2:1.0/input/input0
DEV: registering device: ID = 'mouse0'
DEV: registering device: ID = 'event0'
bound device '3-2:1.0' to driver 'usbtouchscreen'
usb: Bound Device 3-2:1.0 to Driver usbtouchscreen
usbcore: registered new interface driver usbtouchscreen
bus i2c: add driver rtc-ds1307
i2c /dev entries driver
device class 'i2c-dev': registering
bus i2c: add driver dev_driver
bus platform: add driver fsl-i2c
platform: Matched Device fsl-i2c.0 with Driver fsl-i2c
platform: Probing driver fsl-i2c with device fsl-i2c.0
DEV: registering device: ID = 'i2c-0'
DEV: registering device: ID = 'i2c-0'
bound device 'fsl-i2c.0' to driver 'fsl-i2c'
platform: Bound Device fsl-i2c.0 to Driver fsl-i2c
bus usb: add driver usbhid
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
DEV: registering device: ID = 'sit0'
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
driver_probe_done: probe_count = 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k init
class_uevent - name = 0000:00
class_uevent - name = 0:0:0:0
class_uevent - name = 0:0:0:0
class_uevent - name = host0
class_uevent - name = host1
class_uevent - name = host2
class_uevent - name = usb_host1
class_device_create_uevent called for usb_host1
class_uevent - name = usb_host2
class_device_create_uevent called for usb_host2
class_uevent - name = usb_host3
class_device_create_uevent called for usb_host3
EXT3 FS on sda1, internal journal
Adding 2939884k swap on /dev/sda2. Priority:-1 extents:1 across:2939884k
DEV: registering device: ID = 'vcs1'
DEV: registering device: ID = 'vcsa1'
DEV: Unregistering device. ID = 'vcs1'
device_create_release called for vcs1
DEV: Unregistering device. ID = 'vcsa1'
device_create_release called for vcsa1
DEV: registering device: ID = 'vcs1'
DEV: registering device: ID = 'vcsa1'
DEV: Unregistering device. ID = 'vcs1'
device_create_release called for vcs1
DEV: Unregistering device. ID = 'vcsa1'
device_create_release called for vcsa1
DEV: registering device: ID = 'vcs1'
DEV: registering device: ID = 'vcsa1'
DEV: registering device: ID = 'vcs2'
DEV: registering device: ID = 'vcsa2'
DEV: registering device: ID = 'vcs3'
DEV: registering device: ID = 'vcsa3'
DEV: registering device: ID = 'vcs5'
DEV: registering device: ID = 'vcsa5'
DEV: registering device: ID = 'vcs6'
DEV: registering device: ID = 'vcsa6'
DEV: registering device: ID = 'vcs4'
DEV: registering device: ID = 'vcsa4'
PHY: e0024520:00 - Link is Up - 100/Half
eth0: no IPv6 routers present
[-- Attachment #3: .config --]
[-- Type: application/x-config, Size: 27428 bytes --]
next prev parent reply other threads:[~2007-11-28 19:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-28 18:25 DS1337 RTC on I2C broken Clemens Koller
2007-11-28 18:43 ` Alessandro Zummo
2007-11-28 19:20 ` Clemens Koller
2007-11-28 19:36 ` Clemens Koller [this message]
2007-11-28 20:34 ` [rtc-linux] " Alessandro Zummo
2007-11-29 11:24 ` Clemens Koller
2007-11-29 11:34 ` raul.moreno
2007-11-29 12:43 ` Clemens Koller
2007-11-29 20:03 ` Clemens Koller
2007-11-29 20:19 ` Alessandro Zummo
2007-11-30 11:04 ` Clemens Koller
2007-11-30 11:20 ` [rtc-linux] " Alessandro Zummo
2007-11-30 14:12 ` Clemens Koller
2007-12-01 12:24 ` Alessandro Zummo
2007-12-02 20:25 ` Olof Johansson
2007-11-30 18:12 ` Clemens Koller
2007-12-01 12:16 ` Alessandro Zummo
2007-12-03 15:14 ` Clemens Koller
2007-12-03 16:07 ` Bartlomiej Sieka
2007-12-03 16:38 ` Clemens Koller
2007-12-03 16:09 ` solved: " Clemens Koller
2007-12-03 16:48 ` Scott Wood
2007-12-03 17:41 ` OT: " Clemens Koller
2007-12-03 18:07 ` Scott Wood
2007-12-03 19:35 ` Clemens Koller
2007-12-03 20:05 ` Grant Likely
2007-12-03 20:46 ` Scott Wood
2007-12-04 11:42 ` Clemens Koller
2007-12-04 13:08 ` Scott Wood
2007-12-04 15:32 ` Clemens Koller
2007-12-04 16:08 ` Scott Wood
2007-12-05 10:27 ` Clemens Koller
2007-12-04 17:19 ` Jon Smirl
2007-12-05 10:30 ` Clemens Koller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=474DC326.6070209@anagramm.de \
--to=clemens.koller@anagramm$(echo .)de \
--cc=alessandro.zummo@towertech$(echo .)it \
--cc=linuxppc-embedded@ozlabs$(echo .)org \
--cc=rtc-linux@googlegroups$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox