Subject: Re: Using SPI in lite5200

From: "Miguel Angel Alvarez" <[email-masked]>
Date: Thu, 27 Dec 2007 16:17:47 +0100

Hi

It seems the problem is much harder that I thought. I was trying to use 
SPI_MOSI, SPI_MISO, SPI_SS and SPI_CLK lines in the PSC3 of my MPC5200, 
and this made me thought that I could use the "mpc52xx-psc-spi" driver.

Reading better the user guide, I have found that the "mpc52xx-psc-spi" 
driver is related to the "codec" spi of the PSC3 and not to the SPI 
subsystem. Am I right?

In this case... Which code should I use as "master driver"? 
mpc52xx-devices.c talks about a "mpc52xx-spi" driver, but I cannot find 
it. Does it exist?

All suggestions will be appreciated.

Thanks

Miguel Ángel 
 
----------------------------------------- PLEASE NOTE -------------------------------------------
This message, along with any attachments, may be confidential or legally privileged. 
It is intended only for the named person(s), who is/are the only authorized recipients.
If this message has reached you in error, kindly destroy it without review and notify the sender immediately.
Thank you for your help.
µSysCom uses virus scanning software but excludes any liability for viruses contained in any attachment.
 
------------------------------------ ROGAMOS LEA ESTE TEXTO -------------------------------
Este mensaje y sus anexos pueden contener información confidencial y/o con derecho legal. 
Está dirigido únicamente a la/s persona/s o entidad/es reseñadas como único destinatario autorizado.
Si este mensaje le hubiera llegado por error, por favor elimínelo sin revisarlo ni reenviarlo y notifíquelo inmediatamente al remitente. Gracias por su colaboración.  
µSysCom utiliza software antivirus, pero no se hace responsable de los virus contenidos en los ficheros anexos.