Subject: [PATCH 4/4] 82xx: MGCOGE support

From: Heiko Schocher <[email-masked]>
Date: Tue, 29 Jan 2008 11:22:55 +0100

Hello,

To get the serial console on the SMC2 working, the
following patch is needed:

Fixing serial console on a SMC on MPC82xx based
board and using CONFIG_PPC_CPM_NEW_BINDING

Signed-off-by: Heiko Schocher <[email-masked]>
---
 drivers/serial/cpm_uart/cpm_uart_core.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index b5e4478..7e610c2 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -978,9 +978,24 @@ static int cpm_uart_init_port(struct device_node *np,
 		pinfo->sccup = pram;
 	} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
 	           of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
+		u16 __iomem *pram_base;
+		struct resource res;
+
 		pinfo->flags |= FLAG_SMC;
 		pinfo->smcp = mem;
 		pinfo->smcup = pram;
+
+		if (of_address_to_resource(np, 1, &res)) {
+			ret = -ENOMEM;
+			goto out_pram;
+		}
+		pram_base = of_iomap(np, 2);
+		if (!pram_base) {
+			ret = -ENOMEM;
+			goto out_pram;
+		}
+		*pram_base = res.start;
+		iounmap (pram_base);
 	} else {
 		ret = -ENODEV;
 		goto out_pram;
-- 
1.5.2.2

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany