* TSEC3/4 broken on MPC8548?
@ 2008-04-08 13:40 Wolfgang Grandegger
2008-04-08 14:17 ` Kumar Gala
2008-04-11 18:43 ` Andy Fleming
0 siblings, 2 replies; 3+ messages in thread
From: Wolfgang Grandegger @ 2008-04-08 13:40 UTC (permalink / raw)
To: linuxppc-embedded
Hello,
in the dts file for the MPC8548CDS the nodes for TSEC3/4 are commented
out because they seem to be broken:
$ grep broken arch/powerpc/boot/dts/*
arch/powerpc/boot/dts/mpc8548cds.dts:/* eTSEC 3/4 are currently broken
Is it still true?
TIA.
Wolfgang.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: TSEC3/4 broken on MPC8548?
2008-04-08 13:40 TSEC3/4 broken on MPC8548? Wolfgang Grandegger
@ 2008-04-08 14:17 ` Kumar Gala
2008-04-11 18:43 ` Andy Fleming
1 sibling, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2008-04-08 14:17 UTC (permalink / raw)
To: Wolfgang Grandegger; +Cc: LinuxPPC-Embedded
On Apr 8, 2008, at 8:40 AM, Wolfgang Grandegger wrote:
> Hello,
>
> in the dts file for the MPC8548CDS the nodes for TSEC3/4 are commented
> out because they seem to be broken:
>
> $ grep broken arch/powerpc/boot/dts/*
> arch/powerpc/boot/dts/mpc8548cds.dts:/* eTSEC 3/4 are currently
> broken
>
> Is it still true?
This was a board issue and not a chip issue. However I'm not sure if
the board issues have been resolved. Hopefully Andy will know.
- k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: TSEC3/4 broken on MPC8548?
2008-04-08 13:40 TSEC3/4 broken on MPC8548? Wolfgang Grandegger
2008-04-08 14:17 ` Kumar Gala
@ 2008-04-11 18:43 ` Andy Fleming
1 sibling, 0 replies; 3+ messages in thread
From: Andy Fleming @ 2008-04-11 18:43 UTC (permalink / raw)
To: Wolfgang Grandegger; +Cc: linuxppc-embedded
On Apr 8, 2008, at 08:40, Wolfgang Grandegger wrote:
> Hello,
>
> in the dts file for the MPC8548CDS the nodes for TSEC3/4 are commented
> out because they seem to be broken:
>
> $ grep broken arch/powerpc/boot/dts/*
> arch/powerpc/boot/dts/mpc8548cds.dts:/* eTSEC 3/4 are currently
> broken
It's still true for the boards for which it was true. :)
Recent 8548 CDS systems (ones which have eTSEC3&4 exposed out the
side, rather than the back) should be fine. If you remove the
comment, it should work. Actually, I vaguely recall there might be a
bug in the dts there. Should be an easy fix, though. Something like
the wrong address for the regs, or the wrong interrupts numbers.
I will roll up a patch.
Andy
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-04-11 18:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-08 13:40 TSEC3/4 broken on MPC8548? Wolfgang Grandegger
2008-04-08 14:17 ` Kumar Gala
2008-04-11 18:43 ` Andy Fleming
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox