From: Scott Wood <scottwood@freescale•com>
To: matvejchikov@gmail•com
Cc: linuxppc-embedded@ozlabs•org
Subject: Re: The 2.6.25 kernel dosen't run on pq2fads based board
Date: Wed, 04 Jun 2008 13:41:32 -0500 [thread overview]
Message-ID: <4846E1DC.9010104@freescale.com> (raw)
In-Reply-To: <8496f91a0806040525u7e137221sc4bea5466cde3161@mail.gmail.com>
Matvejchikov Ilya wrote:
> Hi all!
>
> There is a problem with 2.6.25.4 kernel on the pq2fads based board.
Works for me using cuImage.
> ## Booting kernel from Legacy Image at 00200000 ...
> Image Name: Linux-2.6.25.4
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 1534783 Bytes = 1.5 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> ## Flattened Device Tree blob at 00800000
> Booting using the fdt blob at 0x800000
> Loading Device Tree to 007fe000, end 007fffff ... OK
I don't see FDT support for this board in current u-boot (I should
really get around to fixing that...), so I assume you're using a
modified u-boot?
> Xid mach(): done
> MMU:enter
> MMU:hw init
> MMU:mapin
> MMU:setio
> MMU:exit
> <<---- the reset was here :(
Perhaps your u-boot isn't properly filling in the memory node.
Oh, and just in case -- if you're using binutils 2.17, it's buggy.
-Scott
next prev parent reply other threads:[~2008-06-04 18:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-04 12:25 The 2.6.25 kernel dosen't run on pq2fads based board Matvejchikov Ilya
2008-06-04 18:41 ` Scott Wood [this message]
2008-06-05 19:04 ` Matvejchikov Ilya
2008-06-07 11:04 ` Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4846E1DC.9010104@freescale.com \
--to=scottwood@freescale$(echo .)com \
--cc=linuxppc-embedded@ozlabs$(echo .)org \
--cc=matvejchikov@gmail$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox