Subject: [PATCH] powerpc: Add documentation for CPM GPIO banks to booting-without-of

From: Jochen Friedrich <[email-masked]>
Date: Wed, 02 Jul 2008 18:08:06 +0200

Signed-off-by: Jochen Friedrich <[email-masked]>
---
 Documentation/powerpc/booting-without-of.txt |   39 ++++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 26d323f..5fe68ee 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2174,6 +2174,45 @@ platforms are moved over to use the flattened-device-tree model.
 		};
 	};

+   xi) GPIO
+
+   Every GPIO controller node must have #gpio-cells property defined,
+   this information will be used to translate gpio-specifiers.
+   On CPM1 devices, all ports are using slightly different register layouts.
+   Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+   On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+   Properties:
+   - compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
+     "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+     "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+   - #gpio-cells : Should be two. The first cell is the pin number and the
+     second cell is used to specify optional paramters (currently unused).
+   - gpio-controller : Marks the port as GPIO controller.
+
+   Example of three SOC GPIO banks defined as gpio-controller nodes:
+
+	CPM1_PIO_A: gpio-controller@950 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-a";
+		reg = <0x950 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_B: gpio-controller@ab8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-b";
+		reg = <0xab8 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_E: gpio-controller@ac8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-e";
+		reg = <0xac8 0x18>;
+		gpio-controller;
+	};
+
    m) Chipselect/Local Bus

    Properties:
-- 
1.5.6