From: Georg Schardt <schardt@team-ctech•de>
To: Neeraj Garg <neerajg@cdac•in>
Cc: linuxppc-embedded@ozlabs•org
Subject: Re: EDK10.1 and emaclite
Date: Tue, 09 Sep 2008 09:30:11 +0200 [thread overview]
Message-ID: <48C62603.7080606@team-ctech.de> (raw)
In-Reply-To: <48C5F6ED.4000804@cdac.in>
Hi again,
mmh, there is no kernel message with PHY detection, but all PHY drivers
are compiled in.
i looked at my xps project and there is only one ip-core "Ethernet_MAC"
with type "xps_ethernetlite".
is it possible that the phy connection is missing ? i use the base
system builder with the board support files supported from avnet.
where can i look for the ethernet speed ? the ethernetlite ip has no
speed options
thanks for your help
georg
Neeraj Garg wrote:
> Hi Georg,
>
> Can you post linux bootup message where its says PHY is detected at
> paticular address, and check with your hardware what is actual address
> of PHY. Also I would like to know the configuration of your hardware
> whether its configured of 10MBPS OR 100MBPS.
>
>
> ------------------------------------------------------------------------------------------
>
> --
> Neeraj Garg
>
>
>
> Message: 3
> Date: Mon, 08 Sep 2008 18:29:53 +0200
> From: Georg Schardt <schardt@team-ctech•de>
> Subject: EDK10.1 and emaclite
> To: linuxppc-embedded@ozlabs•org
> Message-ID: <48C55301.4070208@team-ctech•de>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi all,
>
> im trying to use the emaclite core which comes with the EDK10.1 with
> the 2.6.26 kernel from git.xilinx.com on virtex4fx12 minimodul. the
> emac is detect by the kernel:
>
> xilinx_emaclite xilinx_emaclite.0: MAC address is now 2: 0: 0: 0: 0: 0
> xilinx_emaclite xilinx_emaclite.0: using fifo mode.
> xilinx_emaclite xilinx_emaclite.0: Xilinx EMACLite at 0x81000000
> mapped to 0xC5060000, irq=0
>
> i can change the mac-address with ifconfig and i can give an
> ip-address to the device,
> but a ping is not possible and arp is not working. i think that the
> phy is not working right.
>
> has someone others the same problem ? what can i changed ? i have
> tried out all possible phy driver in the linux kernel
>
> a setup with the lltemac is working fine, but i want to use the emaclite
>
> thanks
> regards
> georg
>
next prev parent reply other threads:[~2008-09-09 7:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-09 4:09 EDK10.1 and emaclite Neeraj Garg
2008-09-09 7:30 ` Georg Schardt [this message]
2008-09-09 8:25 ` Neeraj Garg
2008-09-09 8:36 ` Georg Schardt
2008-09-09 8:59 ` Georg Schardt
2008-09-09 18:58 ` jozsef imrek
2008-09-09 15:23 ` John Linn
2008-09-09 18:40 ` jozsef imrek
-- strict thread matches above, loose matches on Subject: below --
2008-09-08 16:29 Georg Schardt
2008-09-08 22:25 ` John Linn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48C62603.7080606@team-ctech.de \
--to=schardt@team-ctech$(echo .)de \
--cc=linuxppc-embedded@ozlabs$(echo .)org \
--cc=neerajg@cdac$(echo .)in \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox