public inbox for linuxppc-dev@ozlabs.org 
 help / color / mirror / Atom feed
From: Matt Sealey <matt@genesi-usa•com>
To: "Lehmann, Hans (Ritter Elektronik)" <hans.lehmann@ritter-elektronik•de>
Cc: Tim Yamin <plasm@roo•me.uk>, linuxppc-dev@ozlabs•org
Subject: Re: [PATCH]: [MPC5200] Add ATA DMA support
Date: Tue, 11 Nov 2008 08:35:51 -0600	[thread overview]
Message-ID: <49199847.5090505@genesi-usa.com> (raw)
In-Reply-To: <633A55242A59C7488FAAF5A6850929984B8133@SRVEXC01.sts.saurer.vpn>

Oddly I built 2.6.27.2 with the patch and the Efika "waited" for a disk to appear
and didn't get anywhere. If I set libata.dma=0 then it complained about missing
symbols (but not with it enabled!).

This was a clean SUSE kernel from Factory, with only the ATA patch applied with
a few hand-merges (pata_mpc52xx.c has had a line of whitespace removed at some
point, but otherwise identical).

Lehmann, Hans (Ritter Elektronik) wrote:
> Tim, Grant,
> 
> I have tested the patch on our MPC5200B based board with Kingston Elite Pro CF-card and it worked fine with DMA2. I have port the patch back to 2.6.24.7 Kernel and I can't detect problems our errors, even with big files (40 mB) over FEC wich I save to card . We get performance up to 10,5mB/s which is near to the max. speed.
> 
> Greetings
> 
> 
> 
> 
> Mit freundlichen Grüßen
> 
> Hans Lehmann
> Softwareentwicklung
> 
> Telefon	+49 (0)2191-67-2520
> Fax 	+49 (0)2191-67-703408
> e-mail 	hans.lehmann@ritter-elektronik•de
> 
> 
> 
> Ritter Elektronik GmbH
> Leverkuser Straße 65
> D-42897 Remscheid
> www.ritter-elektronik.de
> 
> Geschäftsführer: Manfred A. Wagner, Dr. Uwe Baader
> Sitz der Gesellschaft: Oberhausen
> HRB 17168 Duisburg  /  USt-ID DE 814009849
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: linuxppc-dev-bounces+hans.lehmann=ritter-elektronik.de@ozlabs•org [mailto:linuxppc-dev-bounces+hans.lehmann=ritter-elektronik.de@ozlabs•org] Im Auftrag von Tim Yamin
> Gesendet: Mittwoch, 13. August 2008 11:07
> An: Grant Likely
> Cc: linuxppc-dev@ozlabs•org
> Betreff: [WW Spam: medium] Re: [PATCH]: [MPC5200] Add ATA DMA support
> 
> On Wed, Aug 13, 2008 at 7:11 AM, Grant Likely <grant.likely@secretlab•ca> wrote:
>> Sounds good to me.  You will get more testers that way.  I can pick it 
>> up for -next if everything else looks good.
> 
> Here are the new patches; tested against 2.6.27-rc3.
> 
> Thanks,
> 
> Tim
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs•org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

-- 
Matt Sealey <matt@genesi-usa•com>
Genesi, Manager, Developer Relations

  reply	other threads:[~2008-11-11 14:36 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <DD39B5C3F4963040ADC9768BE7E430CB03202F4F@is-hdq-exchange.marel.net>
     [not found] ` <DD39B5C3F4963040ADC9768BE7E430CB03203863@is-hdq-exchange.marel.net>
     [not found]   ` <792f5f410808111319m20d6e09bi8e9782da1fdd4aab@mail.gmail.com>
     [not found]     ` <DD39B5C3F4963040ADC9768BE7E430CB0320387D@is-hdq-exchange.marel.net>
     [not found]       ` <792f5f410808111431g8fafba1n3b10468da0d165bf@mail.gmail.com>
     [not found]         ` <DD39B5C3F4963040ADC9768BE7E430CB03203A7B@is-hdq-exchange.marel.net>
     [not found]           ` <792f5f410808120643md72e679o39692c4bfa3f285e@mail.gmail.com>
     [not found]             ` <DD39B5C3F4963040ADC9768BE7E430CB03203A94@is-hdq-exchange.marel.net>
     [not found]               ` <792f5f410808120730j7b4be4f2n7a40de880178ccca@mail.gmail.com>
     [not found]                 ` <DD39B5C3F4963040ADC9768BE7E430CB03203ADC@is-hdq-exchange.marel.net>
     [not found]                   ` <792f5f410808120830v311e0446kc8fddfb97d0b9ea6@mail.gmail.com>
2008-08-12 17:30                     ` [PATCH]: [MPC5200] Add ATA DMA support Daniel Schnell
2008-08-13  5:57                       ` Tim Yamin
2008-08-13  6:02                         ` Grant Likely
2008-08-13  6:06                           ` Tim Yamin
2008-08-13  6:11                             ` Grant Likely
2008-08-13  9:07                               ` Tim Yamin
2008-09-15  5:54                                 ` Grant Likely
2008-10-29 15:34                                   ` Matt Sealey
2008-11-11 14:04                                 ` Lehmann, Hans (Ritter Elektronik)
2008-11-11 14:35                                   ` Matt Sealey [this message]
2008-11-11 15:04                                     ` AW: " Lehmann, Hans (Ritter Elektronik)
2008-11-11 16:16                                       ` Matt Sealey
     [not found] <AclPDG6qSkF9cHawTOKR6zBfDIjvgg==>
2008-11-25 14:45 ` Lehmann, Hans (Ritter Elektronik)
2008-11-25 15:19   ` Matt Sealey
2008-12-20  7:15     ` Grant Likely
2008-12-20  7:18   ` Grant Likely
2009-01-05  9:25     ` AW: " Lehmann, Hans (Ritter Elektronik)
2009-01-05 15:31       ` Grant Likely
2009-07-09 14:24         ` Roman Fietze
2008-09-05 18:29 WITTROCK
  -- strict thread matches above, loose matches on Subject: below --
2008-06-17  8:28 Tim Yamin
2008-08-06 11:58 ` Daniel Schnell
2008-08-06 12:18   ` Tim Yamin
2008-08-06 13:26     ` Daniel Schnell
2008-08-06 14:31       ` Daniel Schnell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49199847.5090505@genesi-usa.com \
    --to=matt@genesi-usa$(echo .)com \
    --cc=hans.lehmann@ritter-elektronik$(echo .)de \
    --cc=linuxppc-dev@ozlabs$(echo .)org \
    --cc=plasm@roo$(echo .)me.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox