Subject: [PATCH] mpc832x_rdb: fix swapped ethernet ids

From: Michael Barkowski <[email-masked]>
Date: Thu, 13 Nov 2008 10:18:28 -0500

ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and
ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so
that the interfaces do not swap addresses when control passes from
U-Boot to the kernel.

Signed-off-by: Michael Barkowski <[email-masked]>
Acked-by: Kim Phillips <[email-masked]>
---
Cheat sheet:
| *Nickname* | WAN port | LAN switch |
| *MAC address* | ethaddr | eth1addr |
| *U-Boot name* | FSL UEC0 | FSL UEC1 |
| *Linux name* | eth1 | eth0 |
| *Phy ID* | 4 | 0 |
| *QE Device* | UCC3@2200 | UCC2@3000 |

arch/powerpc/boot/dts/mpc832x_rdb.dts |    4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 226ff06..dea3091 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -18,8 +18,8 @@
	#size-cells = <1>;

	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
-- 
1.5.4.3