From: Heiko Schocher <hs@denx•de>
To: linuxppc-dev@ozlabs•org
Cc: david@gibson•dropbear.id.au
Subject: [PATCH v2 1/2] 82xx, mgcoge: updates for 2.6.32
Date: Mon, 03 Aug 2009 09:34:50 +0200 [thread overview]
Message-ID: <4A76931A.6@denx.de> (raw)
In-Reply-To: <20090729103203.GA6369@yookeroo.seuss>
[PATCH v2 1/2] 82xx, mgcoge: updates for 2.6.32
- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattformcode
Signed-off-by: Heiko Schocher <hs@denx•de>
---
- against git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
next branch
- checked with checkpatch.pl:
$ ./scripts/checkpatch.pl 0001-82xx-mgcoge-updates-for-2.6.32.patch
total: 0 errors, 0 warnings, 147 lines checked
0001-82xx-mgcoge-updates-for-2.6.32.patch has no obvious style problems and is ready for submission.
$
- changes since v1
- Add comments from David Gibson
removed 2 "device_type" entries
- Add comment from Kumar Gala
splittet into 2 patches (seperated defconfig patch)
arch/powerpc/boot/dts/mgcoge.dts | 53 ++++++++++++++++++++++++++
arch/powerpc/platforms/82xx/mgcoge.c | 69 +++++++++++++++++++++++++++++----
2 files changed, 113 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 633255a..0ce9664 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -162,6 +162,59 @@
fixed-link = <0 0 10 0 0>;
};
+ i2c@11860 {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c";
+ reg = <0x11860 0x20 0x8afc 0x2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <0x29600000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@10d40 {
+ compatible = "fsl,cpm2-mdio-bitbang";
+ reg = <0x10d00 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <12>;
+ fsl,mdc-pin = <13>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ /* FCC1 management to switch */
+ ethernet@11300 {
+ device_type = "network";
+ compatible = "fsl,cpm2-fcc-enet";
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+ local-mac-address = [ 00 01 02 03 04 07 ];
+ interrupts = <32 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy0>;
+ linux,network-index = <1>;
+ fsl,cpm-command = <0x12000300>;
+ };
+
+ /* FCC2 to redundant core unit over backplane */
+ ethernet@11320 {
+ device_type = "network";
+ compatible = "fsl,cpm2-fcc-enet";
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ local-mac-address = [ 00 01 02 03 04 08 ];
+ interrupts = <33 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy1>;
+ linux,network-index = <2>;
+ fsl,cpm-command = <0x16200300>;
+ };
};
PIC: interrupt-controller@10c00 {
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
index c2af169..7a5de9e 100644
--- a/arch/powerpc/platforms/82xx/mgcoge.c
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -50,16 +50,63 @@ struct cpm_pin {
static __initdata struct cpm_pin mgcoge_pins[] = {
/* SMC2 */
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
/* SCC4 */
- {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ /* FCC1 */
+ {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+ {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC2 */
+ {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* MDC */
+ {0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+#if defined(CONFIG_I2C_CPM)
+ /* I2C */
+ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+ {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+#endif
};
static void __init init_ioports(void)
@@ -68,12 +115,16 @@ static void __init init_ioports(void)
for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
const struct cpm_pin *pin = &mgcoge_pins[i];
- cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
}
static void __init mgcoge_setup_arch(void)
--
1.6.0.6
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2009-08-03 7:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-29 8:32 82xx, mgcoge: updates for 2.6.32 Heiko Schocher
2009-07-29 10:32 ` David Gibson
2009-07-30 5:29 ` Heiko Schocher
2009-08-03 7:34 ` Heiko Schocher [this message]
2009-08-07 2:31 ` [PATCH v2 1/2] " Kumar Gala
2009-07-29 13:40 ` Kumar Gala
2009-07-30 5:31 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A76931A.6@denx.de \
--to=hs@denx$(echo .)de \
--cc=david@gibson$(echo .)dropbear.id.au \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox