Subject: Re: Kernel boot up

From: Scott Wood <[email-masked]>
Date: Fri, 26 Aug 2011 15:08:29 -0500

On 08/26/2011 01:00 AM, [email-masked] wrote:
>  
> Thanks scott.
> 
> There was an issue with the file system. Now my board is up with the
> linux boot prompt .
> But ping is not working. 

You still haven't set your MAC address.  U-Boot should be fixing this up
in the device tree.

> The local loopback ping works. My phy chip
> BCM5221 is connected on port A

Your device tree describes a connection on port C.  You need to update
the mdio node's reg to point to port A's registers (0x10d00), and
fsl,mdio-pin and fsl,mdc-pin need to be set to the particular pins your
board uses.

-Scott