From: Hiroo Matsumoto <matsumoto.hiroo@jp•fujitsu.com>
To: Bjorn Helgaas <bhelgaas@google•com>
Cc: linux-pci@vger•kernel.org, linuxppc-dev@lists•ozlabs.org,
jbarnes@virtuousgeek•org,
Kenji Kaneshige <kaneshige.kenji@jp•fujitsu.com>
Subject: [PATCH v2 2/2] microblaze/PCI: Add pcibios_device_change_notifier for microblaze
Date: Wed, 23 May 2012 11:34:03 +0900 [thread overview]
Message-ID: <4FBC4C9B.3030309@jp.fujitsu.com> (raw)
pcibios_setup_bus_devices which sets DMA and IRQs of PCI device is called
only when boot, so DMA and IRQs of PCI device will not set when hotplug.
This patch adds pcibios_device_change_notifier which sets DMA and IRQs of
PCI device when PCI device adds, so DMA and IRQs of PCI device will be set
when boot and hotplug.
Signed-off-by: Hiroo MATSUMOTO <matsumoto.hiroo@jp•fujitsu.com>
---
arch/microblaze/include/asm/pci.h | 2 +-
arch/microblaze/pci/pci-common.c | 67 +++++++++++++++++++++---------------
2 files changed, 40 insertions(+), 29 deletions(-)
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 0331376..8d11277 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -149,8 +149,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end);
-extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
+extern void pcibios_setup_bus_notifier(void);
/* This part of code was originally in xilinx-pci.h */
#ifdef CONFIG_PCI_XILINX
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 85f2ac1..bb28ede 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -1063,31 +1063,6 @@ void __devinit pcibios_setup_bus_self(struct pci_bus *bus)
pcibios_fixup_bridge(bus);
}
-void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- pr_debug("PCI: Fixup bus devices %d (%s)\n",
- bus->number, bus->self ? pci_name(bus->self) : "PHB");
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /* Setup OF node pointer in archdata */
- dev->dev.of_node = pci_device_to_OF_node(dev);
-
- /* Fixup NUMA node as it may not be setup yet by the generic
- * code and is needed by the DMA init
- */
- set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
-
- /* Hook up default DMA ops */
- set_dma_ops(&dev->dev, pci_dma_ops);
- dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET;
-
- /* Read default IRQs and fixup if necessary */
- pci_read_irq_line(dev);
- }
-}
-
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
/* When called from the generic PCI probe, read PCI<->PCI bridge
@@ -1099,9 +1074,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
/* Now fixup the bus bus */
pcibios_setup_bus_self(bus);
-
- /* Now fixup devices on that bus */
- pcibios_setup_bus_devices(bus);
}
EXPORT_SYMBOL(pcibios_fixup_bus);
@@ -1604,6 +1576,43 @@ static void __devinit pcibios_scan_phb(struct pci_controller *hose)
hose->last_busno = bus->subordinate;
}
+static int pcibios_device_change_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pci_dev *dev = to_pci_dev(data);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ /* Setup OF node pointer in archdata */
+ dev->dev.of_node = pci_device_to_OF_node(dev);
+
+ /* Fixup NUMA node as it may not be setup yet by the generic
+ * code and is needed by the DMA init
+ */
+ set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+ /* Hook up default DMA ops */
+ set_dma_ops(&dev->dev, pci_dma_ops);
+ dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET;
+
+ /* Read default IRQs and fixup if necessary */
+ pci_read_irq_line(dev);
+
+ break;
+ }
+
+ return 0;
+}
+
+static struct notifier_block device_nb = {
+ .notifier_call = pcibios_device_change_notifier,
+};
+
+void __devinit pcibios_setup_bus_notifier(void)
+{
+ bus_register_notifier(&pci_bus_type, &device_nb);
+}
+
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
@@ -1611,6 +1620,8 @@ static int __init pcibios_init(void)
printk(KERN_INFO "PCI: Probing PCI hardware\n");
+ pcibios_setup_bus_notifier();
+
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
hose->last_busno = 0xff;
--
1.7.3.4
reply other threads:[~2012-05-23 3:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FBC4C9B.3030309@jp.fujitsu.com \
--to=matsumoto.hiroo@jp$(echo .)fujitsu.com \
--cc=bhelgaas@google$(echo .)com \
--cc=jbarnes@virtuousgeek$(echo .)org \
--cc=kaneshige.kenji@jp$(echo .)fujitsu.com \
--cc=linux-pci@vger$(echo .)kernel.org \
--cc=linuxppc-dev@lists$(echo .)ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox