Subject: PASEMI: PA6T board doesn't boot with the RC1 of kernel 4.2 anymore

From: Christian Zigotzky <[email-masked]>
Date: Thu, 9 Jul 2015 11:12:39 +0200

All

I think you haven't received the SB600 patch yet. I have pasted it in 
this email directly. Thank you for your help. I am sorry because of this 
long patch but I hope you could help me a bit.

Thanks

Christian

------------- nemo_4.1-3.patch -------------

diff -rupN linux-4.1/arch/powerpc/kernel/head_64.S 
linux-4.1-nemo/arch/powerpc/kernel/head_64.S
--- linux-4.1/arch/powerpc/kernel/head_64.S    2015-06-22 
03:47:01.850778538 +0200
+++ linux-4.1-nemo/arch/powerpc/kernel/head_64.S    2015-06-22 
03:27:29.590650112 +0200
@@ -70,6 +70,13 @@ _GLOBAL(__start)
      /* NOP this out unconditionally */
  BEGIN_FTR_SECTION
      FIXUP_ENDIAN
+/* Hack for PWRficient platforms: Due to CFE(?) bug, the 64-bit
+ * word at 0x8 needs to be set to 0. Patch it up here once we're
+ * done executing it (we can be lazy and avoid invalidating
+ * icache)
+ */
+li     r0,0
+std    0,8(0)
      b    __start_initialization_multiplatform
  END_FTR_SECTION(0, 1)

diff -rupN linux-4.1/arch/powerpc/kernel/pci-common.c 
linux-4.1-nemo/arch/powerpc/kernel/pci-common.c
--- linux-4.1/arch/powerpc/kernel/pci-common.c    2015-06-22 
03:47:01.866778538 +0200
+++ linux-4.1-nemo/arch/powerpc/kernel/pci-common.c    2015-06-22 
03:27:29.603650164 +0200
@@ -721,6 +721,19 @@ void pci_process_bridge_OF_ranges(struct
                  isa_io_base =
                      (unsigned long)hose->io_base_virt;
  #endif /* CONFIG_PPC32 */
+
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+                       /* Workaround for lack of device tree. New for 
kernel 3.17: range.cpu_addr instead of cpu_addr and range.size instead 
of size Ch. Zigotzky */
+                       if (primary) {
+                               __ioremap_at(range.cpu_addr, (void 
*)ISA_IO_BASE,
+                               range.size, _PAGE_NO_CACHE|_PAGE_GUARDED);
+                       hose->io_base_virt = (void *)_IO_BASE;
+               /* _IO_BASE needs unsigned long long for the kernel 3.17 
Ch. Zigotzky */
+                       printk("Initialised io_base_virt 0x%lx _IO_BASE 
0x%llx\n", (unsigned long)hose->io_base_virt, (unsigned long long)_IO_BASE);
+                    }
+#endif
+
              /* pci_io_size and io_base_phys always represent IO
               * space starting at 0 so we factor in pci_addr
               */
@@ -1194,6 +1207,7 @@ static void pcibios_allocate_bus_resourc
                  &ioport_resource : &iomem_resource;
          else {
              pr = pci_find_parent_resource(bus->self, res);
+#ifndef CONFIG_PPC_PASEMI_SB600
              if (pr == res) {
                  /* this happens when the generic PCI
                   * code (wrongly) decides that this
@@ -1201,6 +1215,7 @@ static void pcibios_allocate_bus_resourc
                   */
                  continue;
              }
+#endif
          }

          pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
@@ -1632,8 +1647,9 @@ void pcibios_scan_phb(struct pci_control
      pr_debug("PCI: Scanning PHB %s\n", of_node_full_name(node));

      /* Get some IO space for the new PHB */
+#ifndef CONFIG_PPC_PASEMI_SB600
      pcibios_setup_phb_io_space(hose);
-
+#endif
      /* Wire up PHB bus resources */
      pcibios_setup_phb_resources(hose, &resources);

diff -rupN linux-4.1/arch/powerpc/kernel/setup-common.c 
linux-4.1-nemo/arch/powerpc/kernel/setup-common.c
--- linux-4.1/arch/powerpc/kernel/setup-common.c    2015-06-22 
03:47:01.879778538 +0200
+++ linux-4.1-nemo/arch/powerpc/kernel/setup-common.c    2015-06-22 
03:27:29.605650172 +0200
@@ -76,7 +76,15 @@ EXPORT_SYMBOL(ppc_md);
  struct machdep_calls *machine_id;
  EXPORT_SYMBOL(machine_id);

+#ifdef CONFIG_PPC_PASEMI_SB600
+/* FIXME!!
+ * Current PASemi code does not correctly update the value of boot_cpuid
+ * As a temporary fix we use the default 0, which is known to work
+ */
+int boot_cpuid = 0;
+#else
  int boot_cpuid = -1;
+#endif
  EXPORT_SYMBOL_GPL(boot_cpuid);

  unsigned long klimit = (unsigned long) _end;
diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/iommu.c 
linux-4.1-nemo/arch/powerpc/platforms/pasemi/iommu.c
--- linux-4.1/arch/powerpc/platforms/pasemi/iommu.c    2015-06-22 
03:47:02.018778538 +0200
+++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/iommu.c 2015-06-22 
03:27:29.611650196 +0200
@@ -1,3 +1,9 @@
+/* This is a modified copy of
+* usr/src/linux-2.6.39.4/arch/powerpc/platforms/pasemi/iommu.c
+* The mod is on line 150
+* By Len Karpowicz <[email-masked]
+*/
+
  /*
   * Copyright (C) 2005-2008, PA Semi, Inc
   *
@@ -143,8 +149,11 @@ static void iommu_table_iobmap_setup(voi
      iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT;

      /* it_size is in number of entries */
-    iommu_table_iobmap.it_size =
-        0x80000000 >> iommu_table_iobmap.it_page_shift;
+
+/* Note: changed 0x80000000 to 0x7FFFFFFF for SBLive! SB0220 */
+/* out of range problem on A-EON AmigaOne X1000 */
+       iommu_table_iobmap.it_size = 0x7FFFFFFF >> IOBMAP_PAGE_SHIFT;
+

      /* Initialize the common IOMMU code */
      iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/Kconfig 
linux-4.1-nemo/arch/powerpc/platforms/pasemi/Kconfig
--- linux-4.1/arch/powerpc/platforms/pasemi/Kconfig    2015-06-22 
03:47:02.017778538 +0200
+++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/Kconfig 2015-06-22 
03:27:29.620650232 +0200
@@ -14,6 +14,13 @@ config PPC_PASEMI
  menu "PA Semi PWRficient options"
      depends on PPC_PASEMI

+config PPC_PASEMI_SB600
+       bool "Nemo SB600 South Bridge Support"
+       depends on PPC_PASEMI
+       select PPC_I8259
+       help
+       Workarounds for the SB600 South Bridge.
+
  config PPC_PASEMI_IOMMU
      bool "PA Semi IOMMU support"
      depends on PPC_PASEMI
diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/pci.c 
linux-4.1-nemo/arch/powerpc/platforms/pasemi/pci.c
--- linux-4.1/arch/powerpc/platforms/pasemi/pci.c    2015-06-22 
03:47:02.019778538 +0200
+++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/pci.c    2015-06-22 
03:27:29.621650236 +0200
@@ -108,6 +108,69 @@ static int workaround_5945(struct pci_bu
      return 1;
  }

+#ifdef CONFIG_PPC_PASEMI_SB600
+static int sb600_bus = 5;
+static void __iomem *iob_mapbase = NULL;
+
+static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
+                             int offset, int len, u32 *val);
+
+static void sb600_set_flag(int bus)
+{
+    struct resource res;
+    struct device_node *dn;
+       struct pci_bus *busp;
+       u32 val;
+       int err;
+
+       if (sb600_bus == -1)
+       {
+               busp = pci_find_bus(0, 0);
+               pa_pxp_read_config(busp, PCI_DEVFN(17,0), 
PCI_SECONDARY_BUS, 1, &val);
+
+               sb600_bus = val;
+
+               printk(KERN_CRIT "NEMO SB600 on bus %d.\n",sb600_bus);
+       }
+
+       if (iob_mapbase == NULL)
+       {
+        dn = of_find_compatible_node(NULL, "io-bridge", 
"pasemi,1682m-iob");
+        if (!dn)
+        {
+               printk(KERN_CRIT "NEMO SB600 missing iob node\n");
+                       return;
+               }
+
+               err = of_address_to_resource(dn, 0, &res);
+        of_node_put(dn);
+
+               if (err)
+               {
+               printk(KERN_CRIT "NEMO SB600 missing resource\n");
+                       return;
+               }
+
+               printk(KERN_CRIT "NEMO SB600 IOB base %08lx\n",res.start);
+
+               iob_mapbase = ioremap(res.start + 0x100, 0x94);
+       }
+
+       if (iob_mapbase != NULL)
+       {
+               if (bus == sb600_bus)
+               {
+                       out_le32(iob_mapbase + 4, in_le32(iob_mapbase + 
4) | 0x800);
+               }
+               else
+               {
+                       out_le32(iob_mapbase + 4, in_le32(iob_mapbase + 
4) & ~0x800);
+               }
+       }
+}
+#endif
+
+
  static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
                    int offset, int len, u32 *val)
  {
@@ -126,6 +189,10 @@ static int pa_pxp_read_config(struct pci

      addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);

+#ifdef CONFIG_PPC_PASEMI_SB600
+       sb600_set_flag(bus->number);
+#endif
+
      /*
       * Note: the caller has already checked that offset is
       * suitably aligned and that len is 1, 2 or 4.
diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/setup.c 
linux-4.1-nemo/arch/powerpc/platforms/pasemi/setup.c
--- linux-4.1/arch/powerpc/platforms/pasemi/setup.c    2015-06-22 
03:47:02.019778538 +0200
+++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/setup.c 2015-06-22 
03:27:29.623650244 +0200
@@ -34,6 +34,7 @@
  #include <asm/prom.h>
  #include <asm/iommu.h>
  #include <asm/machdep.h>
+#include <asm/i8259.h>
  #include <asm/mpic.h>
  #include <asm/smp.h>
  #include <asm/time.h>
@@ -72,6 +73,17 @@ static void pas_restart(char *cmd)
          out_le32(reset_reg, 0x6000000);
  }

+#ifdef CONFIG_PPC_PASEMI_SB600
+void pas_shutdown(void)
+{
+       /* (added by DStevens 19/06/13)
+          Set the PLD bit that makes the SB600 think the power button 
is being pressed */
+       void __iomem *pld_map = ioremap(0xf5000000,4096);
+       while (1)
+               out_8(pld_map+7,0x01);
+}
+#endif
+
  #ifdef CONFIG_SMP
  static arch_spinlock_t timebase_lock;
  static unsigned long timebase;
@@ -183,6 +195,55 @@ static int __init pas_setup_mce_regs(voi
  }
  machine_device_initcall(pasemi, pas_setup_mce_regs);

+#ifdef CONFIG_PPC_PASEMI_SB600
+static unsigned sb600_irq_to_vector(int irq)
+{
+       switch(irq) {
+       case 3: return 216;
+       case 4: return 217;
+       case 5: return 218;
+       case 6: return 219;
+       case 7: return 220;
+       case 8: return 222;
+       case 9: return 212;
+       case 10: return 213;
+       case 11: return 214;
+       case 12: return 215;
+       case 14: return 221;
+       default: return 0;
+       }
+}
+
+static void sb600_8259_cascade(unsigned int irq, struct irq_data *desc)
+{
+       unsigned int cascade_irq = i8259_irq();
+       unsigned vector = sb600_irq_to_vector(cascade_irq);
+       if (vector > 0)
+               generic_handle_irq(vector);
+       outb(0x20, 0xA0);       /* Non-specific EOI */
+       outb(0x20, 0x20);       /* Non-specific EOI to cascade */
+       desc->chip->irq_eoi(desc);
+}
+extern void i8259_unmask_irq(struct irq_data *d);
+
+__init void sb600_8259_init(void)
+{
+       int gpio_virq;
+
+       // Connect legacy i8259 controller in SB600
+       printk("Init i8259\n");
+       i8259_init(NULL, 0);
+
+       gpio_virq = irq_create_mapping(NULL, 3);
+       irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH);
+       irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
+       mpic_unmask_irq(irq_get_irq_data(gpio_virq));
+
+       // Initial mapping for RTC
+       irq_create_mapping(NULL, 222);
+}
+#endif
+
  static __init void pas_init_IRQ(void)
  {
      struct device_node *np;
@@ -246,6 +307,12 @@ static __init void pas_init_IRQ(void)

      of_node_put(mpic_node);
      of_node_put(root);
+
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+       sb600_8259_init();
+#endif
+
  }

  static void __init pas_progress(char *s, unsigned short hex)
@@ -403,12 +470,39 @@ static const struct of_device_id pasemi_
      {},
  };

-static int __init pasemi_publish_devices(void)
-{
-    pasemi_pcmcia_init();
+#ifdef CONFIG_PPC_PASEMI_SB600
+
+/*
+ This should come from OF tree. See sysdev/rtc_cmos_setup for details. 
Need to get i8259 supported correctly first, so that
+ as the standard support hard-codes IRQ 8.
+ */
+
+
+static struct resource rtc_resource[] = {{
+       .name = "rtc",
+       .start = 0x70,
+       .end = 0x71,
+       .flags = IORESOURCE_IO,
+}, {
+       .name = "rtc",
+       .start = 222,
+       .end = 222,
+       .flags = IORESOURCE_IRQ,
+}};
+
+#endif
+
+
+ static int __init pasemi_publish_devices(void)
+ {
+        pasemi_pcmcia_init();
+
+        /* Publish OF platform devices for SDC and other non-PCI devices */
+        of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);

-    /* Publish OF platform devices for SDC and other non-PCI devices */
-    of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+#ifdef CONFIG_PPC_PASEMI_SB600
+       platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2);
+#endif

      return 0;
  }
@@ -430,9 +524,20 @@ static int __init pas_probe(void)

      alloc_iobmap_l2();

+#ifdef CONFIG_PPC_PASEMI_SB600
+       pm_power_off              = pas_shutdown;         // Varisys 
provided a way to turn us off
+#endif
      return 1;
  }

+
+#ifdef CONFIG_PPC_PASEMI_SB600
+static int sb600_pci_probe_mode(struct pci_bus *bus)
+{
+       return PCI_PROBE_DEVTREE;
+}
+#endif
+
  define_machine(pasemi) {
      .name            = "PA Semi PWRficient",
      .probe            = pas_probe,
@@ -445,4 +550,7 @@ define_machine(pasemi) {
      .calibrate_decr        = generic_calibrate_decr,
      .progress        = pas_progress,
      .machine_check_exception = pas_machine_check_handler,
+#if 0 // def CONFIG_PPC_PASEMI_SB600
+       .pci_probe_mode = sb600_pci_probe_mode,
+#endif
  };
diff -rupN linux-4.1/arch/powerpc/sysdev/i8259.c 
linux-4.1-nemo/arch/powerpc/sysdev/i8259.c
--- linux-4.1/arch/powerpc/sysdev/i8259.c    2015-06-22 
03:47:02.064778538 +0200
+++ linux-4.1-nemo/arch/powerpc/sysdev/i8259.c    2015-06-22 
03:27:29.631650275 +0200
@@ -103,11 +103,11 @@ static void i8259_set_irq_mask(int irq_n
      outb(cached_21,0x21);
  }

-static void i8259_mask_irq(struct irq_data *d)
+void i8259_mask_irq(struct irq_data *d)
  {
      unsigned long flags;

-    pr_debug("i8259_mask_irq(%d)\n", d->irq);
+    printk("i8259_mask_irq(%d)\n", d->irq);

      raw_spin_lock_irqsave(&i8259_lock, flags);
      if (d->irq < 8)
@@ -118,11 +118,11 @@ static void i8259_mask_irq(struct irq_da
      raw_spin_unlock_irqrestore(&i8259_lock, flags);
  }

-static void i8259_unmask_irq(struct irq_data *d)
+void i8259_unmask_irq(struct irq_data *d)
  {
      unsigned long flags;

-    pr_debug("i8259_unmask_irq(%d)\n", d->irq);
+    printk("i8259_unmask_irq(%d)\n", d->irq);

      raw_spin_lock_irqsave(&i8259_lock, flags);
      if (d->irq < 8)
@@ -229,6 +229,8 @@ void i8259_init(struct device_node *node
      /* initialize the controller */
      raw_spin_lock_irqsave(&i8259_lock, flags);

+    printk("About to write to i8259\n");
+
      /* Mask all first */
      outb(0xff, 0xA1);
      outb(0xff, 0x21);
@@ -259,8 +261,12 @@ void i8259_init(struct device_node *node
      outb(cached_A1, 0xA1);
      outb(cached_21, 0x21);

+    printk("Done write to i8259\n");
+
      raw_spin_unlock_irqrestore(&i8259_lock, flags);

+#ifndef CONFIG_PPC_PASEMI_SB600
+
      /* create a legacy host */
      i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL);
      if (i8259_host == NULL) {
@@ -268,6 +274,8 @@ void i8259_init(struct device_node *node
          return;
      }

+#endif
+
      /* reserve our resources */
      /* XXX should we continue doing that ? it seems to cause problems
       * with further requesting of PCI IO resources for that range...
diff -rupN linux-4.1/arch/powerpc/sysdev/mpic.c 
linux-4.1-nemo/arch/powerpc/sysdev/mpic.c
--- linux-4.1/arch/powerpc/sysdev/mpic.c    2015-06-22 
03:47:02.067778538 +0200
+++ linux-4.1-nemo/arch/powerpc/sysdev/mpic.c    2015-06-22 
03:27:29.634650287 +0200
@@ -661,6 +661,56 @@ static inline void mpic_eoi(struct mpic
   * Linux descriptor level callbacks
   */

+#ifdef CONFIG_PPC_PASEMI_SB600
+
+static int sb600_vector_to_irq(unsigned vector)
+{
+       switch(vector) {
+       case 212: return 9;
+       case 213: return 10;
+       case 214: return 11;
+       case 215: return 12;
+       case 216: return 3;
+       case 217: return 4;
+       case 218: return 5;
+       case 219: return 6;
+       case 220: return 7;
+       case 221: return 14;
+       case 222: return 8;
+       default: return -1;
+       }
+}
+
+extern void i8259_mask_irq(struct irq_data *d);
+extern void i8259_unmask_irq(struct irq_data *d);
+
+int sb600_unmask_irq(unsigned irq)
+{
+       int vector = sb600_vector_to_irq(irq);
+       if (vector >= 0) {
+               i8259_unmask_irq(irq_get_irq_data(vector));
+               return 1;
+       } else
+               return 0;
+}
+
+int sb600_mask_irq(unsigned irq)
+{
+       int vector = sb600_vector_to_irq(irq);
+       if (vector >= 0) {
+               i8259_mask_irq(irq_get_irq_data(vector));
+               return 1;
+       } else
+               return 0;
+}
+
+int sb600_end_irq(unsigned irq)
+{
+       int vector = sb600_vector_to_irq(irq);
+       return (vector >= 0);
+}
+
+#endif

  void mpic_unmask_irq(struct irq_data *d)
  {
@@ -668,7 +718,12 @@ void mpic_unmask_irq(struct irq_data *d)
      struct mpic *mpic = mpic_from_irq_data(d);
      unsigned int src = irqd_to_hwirq(d);

-    DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, d->irq, 
src);
+#ifdef CONFIG_PPC_PASEMI_SB600
+       if (sb600_unmask_irq(src))
+               return;
+#endif
+
+       DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, 
src);

      mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
                 mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) &
@@ -689,7 +744,12 @@ void mpic_mask_irq(struct irq_data *d)
      struct mpic *mpic = mpic_from_irq_data(d);
      unsigned int src = irqd_to_hwirq(d);

-    DBG("%s: disable_irq: %d (src %d)\n", mpic->name, d->irq, src);
+#ifdef CONFIG_PPC_PASEMI_SB600
+       if (sb600_mask_irq(src))
+               return;
+#endif
+
+       DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);

      mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
                 mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) |
@@ -709,6 +769,14 @@ void mpic_end_irq(struct irq_data *d)
  {
      struct mpic *mpic = mpic_from_irq_data(d);

+#ifdef CONFIG_PPC_PASEMI_SB600
+       unsigned int src = irqd_to_hwirq(d);
+
+       if (src >= 212 && src <= 222)
+               return;
+#endif
+
+
  #ifdef DEBUG_IRQ
      DBG("%s: end_irq: %d\n", mpic->name, d->irq);
  #endif
diff -rupN linux-4.1/drivers/ata/libata-sff.c 
linux-4.1-nemo/drivers/ata/libata-sff.c
--- linux-4.1/drivers/ata/libata-sff.c    2015-06-22 03:47:03.376778537 
+0200
+++ linux-4.1-nemo/drivers/ata/libata-sff.c    2015-06-22 
03:27:29.646650335 +0200
@@ -2438,9 +2438,9 @@ int ata_pci_sff_activate_host(struct ata
      if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
          u8 tmp8, mask;

-        /* TODO: What if one channel is in native mode ... */
+        /* Don't look at dummy ports in the mask */
          pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
-        mask = (1 << 2) | (1 << 0);
+        mask = (! ata_port_is_dummy(host->ports[1]) << 2) | (! 
ata_port_is_dummy(host->ports[0]) << 0);
          if ((tmp8 & mask) != mask)
              legacy_mode = 1;
      }
diff -rupN linux-4.1/drivers/ata/pata_atiixp.c 
linux-4.1-nemo/drivers/ata/pata_atiixp.c
--- linux-4.1/drivers/ata/pata_atiixp.c    2015-06-22 03:47:03.384778537 
+0200
+++ linux-4.1-nemo/drivers/ata/pata_atiixp.c    2015-06-22 
03:27:29.649650347 +0200
@@ -278,6 +278,11 @@ static int atiixp_init_one(struct pci_de
      };
      const struct ata_port_info *ppi[] = { &info, &info };

+#ifdef CONFIG_PPC_PASEMI_SB600
+       // Second port not wired on SB600, and config bit cannot be set 
by BIOS
+       ppi[1] = &ata_dummy_port_info;
+#endif
+
      return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
                        ATA_HOST_PARALLEL_SCAN);
  }
diff -rupN linux-4.1/drivers/ata/pata_of_platform.c 
linux-4.1-nemo/drivers/ata/pata_of_platform.c
--- linux-4.1/drivers/ata/pata_of_platform.c    2015-06-22 
03:47:03.400778537 +0200
+++ linux-4.1-nemo/drivers/ata/pata_of_platform.c    2015-06-22 
03:27:29.653650363 +0200
@@ -41,14 +41,36 @@ static int pata_of_platform_probe(struct
          return -EINVAL;
      }

-    ret = of_address_to_resource(dn, 1, &ctl_res);
-    if (ret) {
-        dev_err(&ofdev->dev, "can't get CTL address from "
-            "device tree\n");
-        return -EINVAL;
+    if (of_device_is_compatible(dn, "electra-ide")) {
+        /* Altstatus is really at offset 0x3f6 from the primary window
+         * on electra-ide. Adjust ctl_res and io_res accordingly.
+         */
+        ctl_res = io_res;
+        ctl_res.start = ctl_res.start+0x3f6;
+        io_res.end = ctl_res.start-1;
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+       } else if (of_device_is_compatible(dn, "electra-cf")) {
+               /* Task regs are at 0x800, with alt status @ 0x80e in 
the primary window
+                * on electra-cf. Adjust ctl_res and io_res accordingly.
+                */
+               ctl_res = io_res;
+               io_res.start += 0x800;
+               ctl_res.start = ctl_res.start + 0x80e;
+               io_res.end = ctl_res.start-1;
+#endif
+    } else {
+        ret = of_address_to_resource(dn, 1, &ctl_res);
+        if (ret) {
+            dev_err(&ofdev->dev, "can't get CTL address from "
+                "device tree\n");
+            return -EINVAL;
+        }
      }

      irq_res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
+    if (irq_res)
+        irq_res->flags = 0;

      prop = of_get_property(dn, "reg-shift", NULL);
      if (prop)
@@ -65,6 +87,11 @@ static int pata_of_platform_probe(struct
          dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n");
      }

+#ifdef CONFIG_PPC_PASEMI_SB600
+       irq_res = 0;                    // force irq off (doesn't seem 
to work)
+#endif
+
+
      pio_mask = 1 << pio_mode;
      pio_mask |= (1 << pio_mode) - 1;

@@ -74,7 +101,11 @@ static int pata_of_platform_probe(struct

  static struct of_device_id pata_of_platform_match[] = {
      { .compatible = "ata-generic", },
-    { },
+    { .compatible = "electra-ide", },
+#ifdef CONFIG_PPC_PASEMI_SB600
+       { .compatible = "electra-cf",},
+#endif
+    {},
  };
  MODULE_DEVICE_TABLE(of, pata_of_platform_match);

diff -rupN linux-4.1/drivers/gpu/drm/radeon/radeon_pm.c 
linux-4.1-nemo/drivers/gpu/drm/radeon/radeon_pm.c
--- linux-4.1/drivers/gpu/drm/radeon/radeon_pm.c    2015-06-22 
03:47:04.600778536 +0200
+++ linux-4.1-nemo/drivers/gpu/drm/radeon/radeon_pm.c    2015-06-22 
03:27:29.675650448 +0200
@@ -226,7 +226,10 @@ static void radeon_set_power_state(struc
          /* set memory clock */
          if (rdev->asic->pm.set_memory_clock && (mclk != 
rdev->pm.current_mclk)) {
              radeon_pm_debug_check_in_vbl(rdev, false);
+               /* D.Stevens 2012 for the A-EON AmigaOne X1000: Setting 
memory clock only works on CAICOS and 6570, don't set for anything else 
(We ignore 6570 here */
+               if (rdev->family == CHIP_CAICOS) {
              radeon_set_memory_clock(rdev, mclk);
+               }
              radeon_pm_debug_check_in_vbl(rdev, true);
              rdev->pm.current_mclk = mclk;
              DRM_DEBUG_DRIVER("Setting: m: %d\n", mclk);
@@ -1220,7 +1223,7 @@ static void radeon_pm_resume_old(struct
                          SET_VOLTAGE_TYPE_ASIC_VDDCI);
          if (rdev->pm.default_sclk)
              radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
-        if (rdev->pm.default_mclk)
+        if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS))     
/* Fix for PPC systems HD6000 >6570 by A-EON Core Linux Support Team */
              radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
      }
      /* asic init will reset the default power state */
@@ -1271,7 +1274,7 @@ dpm_resume_fail:
                          SET_VOLTAGE_TYPE_ASIC_VDDCI);
          if (rdev->pm.default_sclk)
              radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
-        if (rdev->pm.default_mclk)
+        if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS))     
/* Fix for PPC & > HD6570 by A-EON Linux Core Support Team */
              radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
      }
  }
@@ -1318,7 +1321,7 @@ static int radeon_pm_init_old(struct rad
                              SET_VOLTAGE_TYPE_ASIC_VDDCI);
              if (rdev->pm.default_sclk)
                  radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
-            if (rdev->pm.default_mclk)
+            if (rdev->pm.default_mclk && (rdev->family == 
CHIP_CAICOS))     // D.Stevens 2013: fix for >HD6570 on PPC
                  radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
          }
      }
@@ -1431,7 +1434,7 @@ dpm_failed:
                          SET_VOLTAGE_TYPE_ASIC_VDDCI);
          if (rdev->pm.default_sclk)
              radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
-        if (rdev->pm.default_mclk)
+        if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS))  // 
D.Stevens 2013: Fix for >HD6570 on ppc
              radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
      }
      DRM_ERROR("radeon: dpm initialization failed\n");
diff -rupN linux-4.1/drivers/pci/pci.c linux-4.1-nemo/drivers/pci/pci.c
--- linux-4.1/drivers/pci/pci.c    2015-06-22 03:47:08.817778536 +0200
+++ linux-4.1-nemo/drivers/pci/pci.c    2015-06-22 03:27:29.717650601 +0200
@@ -421,7 +421,16 @@ struct resource *pci_find_parent_resourc
      pci_bus_for_each_resource(bus, r, i) {
          if (!r)
              continue;
+#ifdef CONFIG_PPC_PASEMI_SB600
+    /* The new code here checks for resources that are not allocated, 
and no longer
+     * returns these, however the SB600 code uses this feature to 
allocate IO ranges
+     * in the ISA map, and this breaks booting on the AmigaOneX1000.
+     * Temporary fix to get the kernel working, remove the resource 
allocated check.
+     */
+        if (resource_contains(r, res)) {
+#else
          if (res->start && resource_contains(r, res)) {
+#endif

              /*
               * If the window is prefetchable but the BAR is
diff -rupN linux-4.1/drivers/pci/probe.c linux-4.1-nemo/drivers/pci/probe.c
--- linux-4.1/drivers/pci/probe.c    2015-06-22 03:47:08.824778536 +0200
+++ linux-4.1-nemo/drivers/pci/probe.c    2015-06-22 03:27:29.720650613 
+0200
@@ -363,7 +363,11 @@ static void pci_read_bridge_io(struct pc
          limit |= ((unsigned long) io_limit_hi << 16);
      }

-    if (base <= limit) {
+       if (base <= limit
+       #ifdef CONFIG_PPC_PASEMI_SB600
+               || child->busn_res.start == 5
+       #endif
+              ) {
          res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | 
IORESOURCE_IO;
          region.start = base;
          region.end = limit + io_granularity - 1;
@@ -1609,11 +1613,14 @@ static int only_one_child(struct pci_bus

      if (!parent || !pci_is_pcie(parent))
          return 0;
+       #ifndef CONFIG_PPC_PASEMI_SB600
+       // SB600 has non-zero devices on non-root bus.
      if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
          return 1;
      if (pci_pcie_type(parent) == PCI_EXP_TYPE_DOWNSTREAM &&
          !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
          return 1;
+    #endif
      return 0;
  }

diff -rupN linux-4.1/drivers/rtc/rtc-cmos.c 
linux-4.1-nemo/drivers/rtc/rtc-cmos.c
--- linux-4.1/drivers/rtc/rtc-cmos.c    2015-06-22 03:47:09.156778536 +0200
+++ linux-4.1-nemo/drivers/rtc/rtc-cmos.c    2015-06-22 
03:27:29.742650701 +0200
@@ -242,6 +242,13 @@ static int cmos_read_alarm(struct device
      }

      rtc_control = CMOS_READ(RTC_CONTROL);
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+       // Nemo BIOS does not init RTC
+       rtc_control = rtc_control | RTC_24H;
+       CMOS_WRITE(rtc_control, RTC_CONTROL);
+#endif
+
      spin_unlock_irq(&rtc_lock);

      if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
diff -rupN linux-4.1/sound/pci/hda/patch_sigmatel.c 
linux-4.1-nemo/sound/pci/hda/patch_sigmatel.c
--- linux-4.1/sound/pci/hda/patch_sigmatel.c    2015-06-22 
03:47:15.039778536 +0200
+++ linux-4.1-nemo/sound/pci/hda/patch_sigmatel.c    2015-06-22 
03:27:29.768650804 +0200
@@ -166,6 +166,7 @@ enum {
      STAC_D965_VERBS,
      STAC_DELL_3ST,
      STAC_DELL_BIOS,
+    STAC_NEMO_DEFAULT,
      STAC_DELL_BIOS_AMIC,
      STAC_DELL_BIOS_SPDIF,
      STAC_927X_DELL_DMIC,
@@ -1359,6 +1360,23 @@ static const struct hda_pintbl oqo9200_p
      {}
  };

+static const struct hda_pintbl nemo_pin_configs[] = {
+   { 0x0a, 0x02214020 },
+   { 0x0b, 0x02A19080 },
+   { 0x0c, 0x0181304E },
+   { 0x0d, 0x01014010 },
+   { 0x0e, 0x01A19040 },
+   { 0x0f, 0x01011012 },
+   { 0x10, 0x01016011 },
+   { 0x11, 0x01012014 },
+   { 0x12, 0x103301F0 },
+   { 0x13, 0x00000000 },
+   { 0x14, 0x00000000 },
+   { 0x21, 0x01442170 },
+   { 0x22, 0x00000000 },
+   { 0x23, 0x00000000 },
+   {}
+};

  static void stac9200_fixup_panasonic(struct hda_codec *codec,
                       const struct hda_fixup *fix, int action)
@@ -3868,6 +3886,10 @@ static const struct hda_fixup stac927x_f
          .type = HDA_FIXUP_PINS,
          .v.pins = d965_5st_no_fp_pin_configs,
      },
+    [STAC_NEMO_DEFAULT] = {
+               .type = HDA_FIXUP_PINS,
+        .v.pins = nemo_pin_configs,
+    },
      [STAC_DELL_3ST] = {
          .type = HDA_FIXUP_PINS,
          .v.pins = dell_3st_pin_configs,
@@ -3924,6 +3946,7 @@ static const struct hda_model_fixup stac
      { .id = STAC_D965_5ST_NO_FP, .name = "5stack-no-fp" },
      { .id = STAC_DELL_3ST, .name = "dell-3stack" },
      { .id = STAC_DELL_BIOS, .name = "dell-bios" },
+    { .id = STAC_NEMO_DEFAULT, .name = "nemo-default" },
      { .id = STAC_DELL_BIOS_AMIC, .name = "dell-bios-amic" },
      { .id = STAC_927X_VOLKNOB, .name = "volknob" },
      {}
@@ -3962,6 +3985,8 @@ static const struct snd_pci_quirk stac92
                 "Intel D965", STAC_D965_5ST),
      SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
                 "Intel D965", STAC_D965_5ST),
+    /* Nemo */
+    SND_PCI_QUIRK(0x1888, 0x1000, "AmigaOne X1000", STAC_NEMO_DEFAULT),
      /* volume-knob fixes */
      SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
      {} /* terminator */
@@ -5035,6 +5060,7 @@ static const struct hda_codec_preset snd
       { .id = 0x83847683, .name = "STAC9221D A2", .patch = 
patch_stac922x },
       { .id = 0x83847618, .name = "STAC9227", .patch = patch_stac927x },
       { .id = 0x83847619, .name = "STAC9227", .patch = patch_stac927x },
+    { .id = 0x83847638, .name = "STAC92HD700", .patch = patch_stac927x },
       { .id = 0x83847616, .name = "STAC9228", .patch = patch_stac927x },
       { .id = 0x83847617, .name = "STAC9228", .patch = patch_stac927x },
       { .id = 0x83847614, .name = "STAC9229", .patch = patch_stac927x },