From: Peter Korsgaard <jacmet@sunsite•dk>
To: Aaron Sells <aaron.sells@zin-tech•com>
Cc: sam.d.karp@gmail•com, linuxppc-embedded@ozlabs•org
Subject: Re: SecretLab 2.6.24 with USB
Date: Thu, 24 Apr 2008 20:25:41 +0200 [thread overview]
Message-ID: <87bq3z2jq2.fsf@macbook.be.48ers.dk> (raw)
In-Reply-To: <4810AF87.80602@zin-tech.com> (Aaron Sells's message of "Thu\, 24 Apr 2008 12\:04\:23 -0400")
>>>>> "Aaron" == Aaron Sells <aaron.sells@zin-tech•com> writes:
Hi,
Aaron> I generate the xparameters_ml403.h file using Xilinx's EDK base system
Aaron> builder wizard. However, the wizard does not automatically enable the
Aaron> Cypress device to be interrupt driven. I have manually done this as
Aaron> described in the attached patch.
Aaron> The resulting xparameters_ml403.h has the following defines:
Aaron> sellsa@SS-SBIR-Ubuntu:~/spacesuit/linux-2.6-xlnx$ cat
Aaron> arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h | grep USB
Aaron> /* Definitions for peripheral CYPRESS_USB */
Aaron> #define XPAR_CYPRESS_USB_PRH0_BASEADDR 0x80800000
Aaron> #define XPAR_CYPRESS_USB_PRH0_HIGHADDR 0x8080FFFF
Aaron> #define XPAR_SYSTEM_USB_INT_PIN_MASK 0X000001
Aaron> #define XPAR_XPS_INTC_0_SYSTEM_USB_INT_PIN_INTR 0
Ok.
Aaron> When I boot the Xilinx ML403 board up, I get the following:
Aaron> [ 9.256329] ------------[ cut here ]------------
Aaron> [ 9.260000] Badness at drivers/usb/c67x00/c67x00-ll-hpi.c:244
Aaron> [ 9.260000] NIP: c01b5d6c LR: c01b5d60 CTR: c00170f4
Aaron> [ 9.260000] REGS: c3c19d70 TRAP: 0700 Not tainted
Aaron> (2.6.24-rc8-xlnx-dirty)
Aaron> [ 9.260000] MSR: 00029030 <EE,ME,IR,DR> CR: 24000082 XER: 20000073
Aaron> [ 9.260000] TASK = c3c178a0[1] 'swapper' THREAD: c3c18000
Aaron> [ 9.260000] GPR00: 00000001 c3c19e20 c3c178a0 00000000 c032f518
Aaron> c0372730 27b38fa6 00000001
Aaron> [ 9.260000] GPR08: 00000000 00200200 c3d2b164 c3d2b164 24000082
Aaron> ffffcd64 c02d4c5c c02d4c6c
Aaron> [ 9.260000] GPR16: c02d4c90 c02d4c98 c02d4ca8 c02d4cd4 c02d4ce8
Aaron> 00000000 c02d7114 c0370e78
Aaron> [ 9.260000] GPR24: c0360000 c02d4c54 c0330724 00000000 c3d2b148
Aaron> 00000000 c3d2b140 c0330708
Aaron> [ 9.260000] NIP [c01b5d6c] c67x00_ll_reset+0x48/0x88
Aaron> [ 9.260000] LR [c01b5d60] c67x00_ll_reset+0x3c/0x88
Aaron> [ 9.260000] Call Trace:
Aaron> [ 9.260000] [c3c19e20] [c01b5d60] c67x00_ll_reset+0x3c/0x88 (unreliable)
This is an interrupt timeout. It seems like the interrupt isn't
correctly connected.
Aaron> Sam, since you have this working, any help would be greatly
Aaron> appreciated. What else do I need to do in order to get USB host
Aaron> working on this board?
That should be about it.
Aaron> +/*
Aaron> + * Cypress USB C67x00 shortcut macro for single instance
Aaron> + */
Aaron> +#define XPAR_C67x00_USB(num) { \
Aaron> + .name = "c67x00", \
Aaron> + .id = num, \
Aaron> + .num_resources = 2, \
Aaron> + .resource = (struct resource[]) { \
Aaron> + { \
Aaron> + .start = XPAR_CYPRESS_USB_PRH0_BASEADDR, \
Aaron> + .end = XPAR_CYPRESS_USB_PRH0_BASEADDR + 0xf, \
Aaron> + .flags = IORESOURCE_MEM, \
Aaron> + }, \
Aaron> + { \
Aaron> + .start = XPAR_XPS_INTC_0_SYSTEM_USB_INT_PIN_INTR, \
Aaron> + .end = XPAR_XPS_INTC_0_SYSTEM_USB_INT_PIN_INTR, \
Aaron> + .flags = IORESOURCE_IRQ, \
Aaron> + }, \
Aaron> + }, \
I guess you need to add a few "num" to those defines to make it work
with multiple devices.
--
Bye, Peter Korsgaard
next prev parent reply other threads:[~2008-04-24 18:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-15 2:27 SecretLab 2.6.24 with USB Sam Karp
2008-04-21 18:09 ` Grant Likely
2008-04-22 19:23 ` aaronsells
2008-04-22 20:09 ` Grant Likely
2008-04-22 20:46 ` Aaron Sells
2008-04-22 20:55 ` Grant Likely
2008-04-23 14:58 ` Aaron Sells
2008-04-23 15:12 ` Peter Korsgaard
2008-04-23 15:41 ` Henrik Larson
[not found] ` <800687fe0804231007l5fdf664fn1d94a1e40dd7fe74@mail.gmail.com>
2008-04-23 17:47 ` Fwd: " Sam Karp
2008-04-23 18:27 ` Peter Korsgaard
2008-04-24 16:04 ` Aaron Sells
2008-04-24 18:25 ` Peter Korsgaard [this message]
2008-04-23 6:43 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bq3z2jq2.fsf@macbook.be.48ers.dk \
--to=jacmet@sunsite$(echo .)dk \
--cc=aaron.sells@zin-tech$(echo .)com \
--cc=linuxppc-embedded@ozlabs$(echo .)org \
--cc=sam.d.karp@gmail$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox