From: Jon Loeliger <jdl@jdl•com>
To: "linuxppc-dev@ozlabs•org" <linuxppc-dev@ozlabs•org>
Subject: 8641 HPCN Flat Device Tree (was: [PATCH] Use IRQ and senses from OF-tree on 8641hpcn.)
Date: Fri, 23 Jun 2006 09:11:26 -0500 [thread overview]
Message-ID: <E1FtmNa-0007pV-57@jdl.com> (raw)
In-Reply-To: Your message of "Fri, 23 Jun 2006 10:11:37 +1000." <1151021497.4046.79.camel@localhost.localdomain>
Folks,
For reference, here is the complete MPC8641 HPCN Device Tree Source
file that we have been using. Please feel free to comment on it.
(And yes, I know we need to change the ethernet "address" property
names -- that's on the Big To Do List still (for all the FSL boards)).
Thanks!
jdl
PS -- This version matches up with assuming the
"Use IRQ and senses from OF-tree on 8641hpcn"
patch has been applied.
/*
* MPC8641 HPCN Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8641HPCN";
compatible = "mpc86xx";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <2>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8641@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
PowerPC,8641@1 {
device_type = "cpu";
reg = <1>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
32-bit;
linux,phandle = <202>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 40000000>; // 1G at 0x0
};
soc8641@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = <0 f8000000 00100000>;
reg = <f8000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
interrupt-parent = <40000>;
dfsrr;
};
i2c@3100 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <2b 2>;
interrupt-parent = <40000>;
dfsrr;
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
interrupts = <4a 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
interrupts = <4a 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
interrupts = <4a 1>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
interrupts = <4a 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
address = [ 00 E0 0C 00 73 00 ];
interrupts = <1d 2 1e 2 22 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
address = [ 00 E0 0C 00 73 01 ];
interrupts = <23 2 24 2 28 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
};
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <26000 1000>;
address = [ 00 E0 0C 00 02 FD ];
interrupts = <1F 2 20 2 21 2>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
};
ethernet@27000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <27000 1000>;
address = [ 00 E0 0C 00 03 FD ];
interrupts = <25 2 26 2 27 2>;
interrupt-parent = <40000>;
phy-handle = <2452003>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
interrupt-parent = <40000>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
interrupt-parent = <40000>;
};
pci@8000 {
compatible = "86xx";
device_type = "pci";
linux,phandle = <8000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
bus-range = <0 fe>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <40000>;
interrupts = <18 2>;
interrupt-map-mask = <f800 0 0 f>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 40000 3 0
8800 0 0 2 40000 4 0
8800 0 0 3 40000 5 0
8800 0 0 4 40000 6 0
/* IDSEL 0x12 */
9000 0 0 1 40000 4 0
9000 0 0 2 40000 5 0
9000 0 0 3 40000 6 0
9000 0 0 4 40000 3 0
/* IDSEL 0x13 */
9800 0 0 1 40000 0 0
9800 0 0 2 40000 0 0
9800 0 0 3 40000 0 0
9800 0 0 4 40000 0 0
/* IDSEL 0x14 */
a000 0 0 1 40000 0 0
a000 0 0 2 40000 0 0
a000 0 0 3 40000 0 0
a000 0 0 4 40000 0 0
/* IDSEL 0x15 */
a800 0 0 1 40000 0 0
a800 0 0 2 40000 0 0
a800 0 0 3 40000 0 0
a800 0 0 4 40000 0 0
/* IDSEL 0x16 */
b000 0 0 1 40000 0 0
b000 0 0 2 40000 0 0
b000 0 0 3 40000 0 0
b000 0 0 4 40000 0 0
/* IDSEL 0x17 */
b800 0 0 1 40000 0 0
b800 0 0 2 40000 0 0
b800 0 0 3 40000 0 0
b800 0 0 4 40000 0 0
/* IDSEL 0x18 */
c000 0 0 1 40000 0 0
c000 0 0 2 40000 0 0
c000 0 0 3 40000 0 0
c000 0 0 4 40000 0 0
/* IDSEL 0x19 */
c800 0 0 1 40000 0 0
c800 0 0 2 40000 0 0
c800 0 0 3 40000 0 0
c800 0 0 4 40000 0 0
/* IDSEL 0x1a */
d000 0 0 1 40000 6 0
d000 0 0 2 40000 3 0
d000 0 0 3 40000 4 0
d000 0 0 4 40000 5 0
/* IDSEL 0x1b */
d800 0 0 1 40000 5 0
d800 0 0 2 40000 0 0
d800 0 0 3 40000 0 0
d800 0 0 4 40000 0 0
/* IDSEL 0x1c */
e000 0 0 1 40000 9 0
e000 0 0 2 40000 a 0
e000 0 0 3 40000 c 0
e000 0 0 4 40000 7 0
/* IDSEL 0x1d */
e800 0 0 1 40000 9 0
e800 0 0 2 40000 a 0
e800 0 0 3 40000 b 0
e800 0 0 4 40000 0 0
/* IDSEL 0x1e */
f000 0 0 1 40000 c 0
f000 0 0 2 40000 0 0
f000 0 0 3 40000 0 0
f000 0 0 4 40000 0 0
/* IDSEL 0x1f */
f800 0 0 1 40000 6 0
f800 0 0 2 40000 0 0
f800 0 0 3 40000 0 0
f800 0 0 4 40000 0 0
>;
};
pic@40000 {
linux,phandle = <40000>;
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
interrupts = <
10 2 11 2 12 2 13 2
14 2 15 2 16 2 17 2
18 2 19 2 1a 2 1b 2
1c 2 1d 2 1e 2 1f 2
20 2 21 2 22 2 23 2
24 2 25 2 26 2 27 2
28 2 29 2 2a 2 2b 2
2c 2 2d 2 2e 2 2f 2
30 2 31 2 32 2 33 2
34 2 35 2 36 2 37 2
38 2 39 2 2a 2 3b 2
3c 2 3d 2 3e 2 3f 2
48 1 49 2 4a 1
>;
interrupt-parent = <40000>;
};
};
};
prev parent reply other threads:[~2006-06-23 14:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-22 18:04 [PATCH] Use IRQ and senses from OF-tree on 8641hpcn Jon Loeliger
2006-06-23 0:11 ` Benjamin Herrenschmidt
2006-06-23 14:06 ` Jon Loeliger
2006-06-23 14:11 ` Jon Loeliger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1FtmNa-0007pV-57@jdl.com \
--to=jdl@jdl$(echo .)com \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox