From: "Eric Cottrell" <wb1hbu@runbox•com>
To: linuxppc-dev@ozlabs•org
Subject: Can not get "new" MPC8313e-RDB to boot "as-shipped" flash image
Date: Sun, 22 Feb 2009 18:23:53 -0500 (EST) [thread overview]
Message-ID: <E1LbNft-0007z6-Pf@garm.runbox.com> (raw)
Hello,
This is getting frustrating and I am beginning to think someone messed this=
board up and returned it. I would think it would boot up the default flas=
h image out of the box with very little trouble.
Board is a MPC8313e-RDB Rev A4. I set the dip switches per the instruction=
s, S4 all off and S3 all on.
Uboot comes up but I can not boot either the default images in the flash or=
images I built with ltib and tftped. I did not touch the flash. I get WA=
RNING: could not set linux,stdout-path FDT_ERR_NOTFOUND and ERROR: /chosen =
node create failed - must RESET the board to recover. The board resets.
A friend has the same board but his U-Boot is Version 1.3.0 (Jun 19 2008 - =
13:41:53) MPC83XX and some environment variables are different. I do not h=
ave the BOOTCMD variable but entered it manually.
I tried searching for on a solution but it is confusing because if aliases =
are needed why does the default dtb in the flash omit them?
This is what happens:
U-Boot 1.3.3 (Dec 8 2008 - 09:51:15) MPC83XX
Reset Status:
CPU: e300c3, MPC8313E, Rev: 1.0 at 333.333 MHz, CSB: 166.666 MHz
Board: Freescale MPC8313ERDB
I2C: ready
DRAM: 128 MB
FLASH: 8 MB
In: serial
Out: serial
Err: serial
Net: TSEC0, TSEC1 [PRIME]
=3D> bootm fe100000 fe300000 fe700000
## Booting kernel from Legacy Image at fe100000 ...
Image Name: Linux-2.6.20
Created: 2007-08-24 14:59:01 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1722821 Bytes =3D 1.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Flattened Device Tree blob at fe700000
Booting using the fdt blob at 0xfe700000
## Loading init Ramdisk from Legacy Image at fe300000 ...
Image Name: uboot ext2 ramdisk rootfs
Created: 2007-08-24 15:01:41 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 2831355 Bytes =3D 2.7 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Device Tree to 007fd000, end 007fffff ... OK
WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND.
ERROR: /chosen node create failed - must RESET the board to recover.
Resetting the board.
U-Boot 1.3.3 (Dec 8 2008 - 09:51:15) MPC83XX
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c3, MPC8313E, Rev: 1.0 at 333.333 MHz, CSB: 166.666 MHz
Board: Freescale MPC8313ERDB
I2C: ready
DRAM: 128 MB
FLASH: 8 MB
In: serial
Out: serial
Err: serial
Net: TSEC0, TSEC1 [PRIME]
=3D>=20
73 Eric
next reply other threads:[~2009-02-22 23:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-22 23:23 Eric Cottrell [this message]
2009-02-24 12:45 ` Can not get "new" MPC8313e-RDB to boot "as-shipped" flash image Norbert van Bolhuis
2009-02-24 14:36 ` Eric Cottrell
2009-02-24 16:29 ` Norbert van Bolhuis
2009-02-24 16:56 ` Eric Cottrell
2009-02-24 18:55 ` Michael Bergandi
2009-03-02 0:58 ` Eric Cottrell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1LbNft-0007z6-Pf@garm.runbox.com \
--to=wb1hbu@runbox$(echo .)com \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox