Subject: Re: [MeeGo-Dev][PATCH v3] Topcliff: Update PCH_CAN driver to 2.6.35

From: "Masayuki Ohtake" <masa-korg-ECg8zkTtlr0C6LszWs/[email-masked]>
Date: Wed, 13 Oct 2010 19:09:42 +0900

On Thursday, September 30, 2010 6:10 PM, Wolfgang Grandegger wrote:

>
> + iowrite32(num, &(priv->regs)->if2_creq);
> + while (counter) {
>> + if2_creq = (ioread32(&(priv->regs)->if2_creq)) &
>> +      CAN_IF_CREQ_BUSY;
>> + if (!if2_creq)
>> + break;
>> + counter--;
>> + }
>> + if (!counter)
>> + dev_err(&priv->ndev->dev, "IF2 BUSY Flag is set forever.\n");
>> +}
>
>Duplicated code!

No.
These are not the same.

Though it is possible to integrate to one function by adding parameter,
I think, current two function method is more easily to read.

>
>
>
>> + if (status & PCH_STUF_ERR)
>> + cf->data[2] |= CAN_ERR_PROT_STUFF;
>> +
>> + if (status & PCH_FORM_ERR)
>> + cf->data[2] |= CAN_ERR_PROT_FORM;
> +
> + if (status & PCH_ACK_ERR)
> + cf->data[2] |= CAN_ERR_PROT_LOC_ACK | CAN_ERR_PROT_LOC_ACK_DEL;
> +
> + if ((status & PCH_BIT1_ERR) || (status & PCH_BIT0_ERR))
> + cf->data[2] |= CAN_ERR_PROT_BIT;
> +
> + if (status & PCH_CRC_ERR)
> + cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
> + CAN_ERR_PROT_LOC_CRC_DEL;
> +
> + if (status & PCH_LEC_ALL)
> + iowrite32(status | PCH_LEC_ALL,
> +   &(priv->regs)->stat);
>
>A bit-wise test of the above values is wrong, I believe. Please use the
>switch statement instead.

The above conditions are not only one time.
I think "switch" is not suitable for the above.
Thus, current "if" processing is better.

>
>
> + u32 brp;
> +
> + pch_can_get_run_mode(priv, &curr_mode);
> + if (curr_mode == PCH_CAN_RUN)
> + pch_can_set_run_mode(priv, PCH_CAN_STOP);
>
>The device is stopped when this function is called. Please remove.

No.
The above is necessary.
Because this is our HW specification.
Before setting bitrate, run-mode must be "STOP".

>
>
> +static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev)
> +{
> + canid_t id;
> + u32 id1 = 0;
> + u32 id2 = 0;
>
>Need these values to be preset?

These values are not essential.
But these help a engineer to read this code.

>
>
> + /* Enable CAN Interrupts */
> + pch_can_set_int_custom(priv);
> +
> + /* Restore Run Mode */
> + pch_can_set_run_mode(priv, PCH_CAN_RUN);
> +
> + return retval;
> +}
>
>Are the suspend and resume functions tested?
>
Yes, we tested before.

=========================================

Except the above, we are modifying for your indications.

I will resubmit soon.

Thanks, Ohtake(OKISemi)