From: Jesper Dangaard Brouer <jdb@comx•dk>
To: Gary Thomas <gary@mlbassoc•com>
Cc: Jesper Dangaard Brouer <hawk@diku•dk>,
Lennert Buytenhek <buytenh@wantstofly•org>,
netdev <netdev@vger•kernel.org>
Subject: Re: Marvell 88E609x switch?
Date: Sat, 07 Mar 2009 16:53:45 +0100 [thread overview]
Message-ID: <1236441225.14145.7.camel@localhost.localdomain> (raw)
In-Reply-To: <49B145FF.5060208@mlbassoc.com>
On Fri, 2009-03-06 at 08:49 -0700, Gary Thomas wrote:
> After much experimentation, I finally found out what was
> wrong. Basically, the trunk masks have 8 bits on the 6131,
> but 11 bits on the 609x and this wasn't being handled. Once
> the trunk masks were reset by the init code, there was no
> path to the CPU port from the LAN ports :-( The attached
> patch is what I've ended up with. It works, at least for
> a single switch.
Thats great! ... finally you discovered the difference :-)
Once you are ready with a more final patch, I'll be happy to review it
(and fixup any whitespace compliance stuff... which the attached patch
does not comply to ;-))
> Next, I need to get it to work with multiple switches (separate
> ethernet controllers, same/shared MII bus), as well as a cascaded
> switch.
Okay, I'll be happy to review any patches, but I don't have any
experience with a multiple switch chip setup...
--
Med venlig hilsen / Best regards
Jesper Brouer
ComX Networks A/S
Linux Network developer
Cand. Scient Datalog / MSc.
Author of http://adsl-optimizer.dk
LinkedIn: http://www.linkedin.com/in/brouer
next prev parent reply other threads:[~2009-03-07 15:53 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-25 1:16 Marvell 88E609x switch? Gary Thomas
2009-02-25 6:31 ` Jesper Dangaard Brouer
2009-02-25 13:15 ` Lennert Buytenhek
2009-02-25 21:30 ` Gary Thomas
2009-02-26 15:11 ` Lennert Buytenhek
2009-02-26 15:47 ` Gary Thomas
2009-02-26 15:57 ` Lennert Buytenhek
2009-02-27 1:12 ` Gary Thomas
2009-02-27 1:19 ` Lennert Buytenhek
2009-02-27 12:25 ` Gary Thomas
2009-02-27 12:42 ` Gary Thomas
2009-02-27 12:53 ` Lennert Buytenhek
2009-02-27 13:19 ` Gary Thomas
2009-02-27 13:23 ` Lennert Buytenhek
2009-02-27 13:27 ` Gary Thomas
2009-02-27 14:27 ` Lennert Buytenhek
2009-02-27 14:36 ` Gary Thomas
2009-02-27 14:40 ` Lennert Buytenhek
2009-02-27 14:55 ` Gary Thomas
2009-02-27 14:57 ` Lennert Buytenhek
2009-02-27 15:08 ` Gary Thomas
2009-02-27 15:14 ` Lennert Buytenhek
2009-02-27 15:25 ` Gary Thomas
2009-02-27 15:27 ` Lennert Buytenhek
2009-02-27 15:29 ` Gary Thomas
2009-02-27 15:31 ` Lennert Buytenhek
2009-02-27 15:44 ` Gary Thomas
2009-02-27 15:52 ` Lennert Buytenhek
2009-02-27 21:12 ` Jesper Dangaard Brouer
2009-02-27 22:28 ` Lennert Buytenhek
2009-03-02 10:56 ` Jesper Dangaard Brouer
2009-03-02 11:05 ` Jesper Dangaard Brouer
2009-03-02 15:14 ` Gary Thomas
2009-03-02 15:22 ` Gary Thomas
2009-03-02 22:05 ` Jesper Dangaard Brouer
2009-03-02 22:32 ` Gary Thomas
2009-03-03 8:52 ` Jesper Dangaard Brouer
2009-03-03 9:04 ` Jesper Dangaard Brouer
2009-03-03 12:02 ` Gary Thomas
2009-03-03 12:03 ` Gary Thomas
2009-03-03 12:32 ` Jesper Dangaard Brouer
2009-03-03 13:25 ` Gary Thomas
2009-03-03 13:30 ` Gary Thomas
2009-03-03 21:52 ` Gary Thomas
2009-03-06 15:49 ` Gary Thomas
2009-03-07 15:53 ` Jesper Dangaard Brouer [this message]
[not found] ` <20090310102805.GO4738@xi.wantstofly.org>
2009-03-10 11:20 ` Gary Thomas
2009-03-10 13:36 ` Lennert Buytenhek
2009-03-10 15:11 ` Gary Thomas
2009-03-11 15:12 ` Lennert Buytenhek
2009-03-11 21:28 ` Lennert Buytenhek
2009-03-10 9:56 ` Lennert Buytenhek
2009-03-10 9:43 ` Lennert Buytenhek
[not found] ` <20090310093915.GK4738@xi.wantstofly.org>
2009-03-10 11:20 ` Gary Thomas
2009-02-28 17:37 ` Gary Thomas
2009-02-28 19:10 ` Jesper Dangaard Brouer
2009-02-28 19:31 ` Gary Thomas
2009-03-02 10:14 ` Jesper Dangaard Brouer
2009-03-10 9:34 ` Lennert Buytenhek
2009-02-27 12:52 ` Lennert Buytenhek
2009-02-27 13:22 ` Gary Thomas
2009-02-27 14:25 ` Lennert Buytenhek
2009-02-27 15:18 ` Anton Vorontsov
2009-02-27 15:26 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236441225.14145.7.camel@localhost.localdomain \
--to=jdb@comx$(echo .)dk \
--cc=buytenh@wantstofly$(echo .)org \
--cc=gary@mlbassoc$(echo .)com \
--cc=hawk@diku$(echo .)dk \
--cc=netdev@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox