Subject: [PATCH net-next 2/6] tg3: Move EEE definitions into mdio.h

From: "Matt Carlson" <[email-masked]>
Date: Mon, 6 Dec 2010 10:28:50 -0800

In commit 52b02d04c801fff51ca49ad033210846d1713253 entitled "tg3: Add
EEE support", Ben Hutchings had commented that the EEE advertisement
register will be in a standard location.  This patch moves that
definition into mdio.h and changes the code to use it.

Signed-off-by: Matt Carlson <[email-masked]>
Reviewed-by: Benjamin Li <[email-masked]>
---
 drivers/net/tg3.c    |   16 ++++++++--------
 drivers/net/tg3.h    |    3 ---
 include/linux/mdio.h |    5 +++++
 3 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b8ae5e1..1e7a135 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -32,6 +32,7 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/ethtool.h>
+#include <linux/mdio.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/brcmphy.h>
@@ -1781,7 +1782,8 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
 
 		tw32(TG3_CPMU_EEE_CTRL, eeectl);
 
-		tg3_phy_cl45_read(tp, 0x7, TG3_CL45_D7_EEERES_STAT, &val);
+		tg3_phy_cl45_read(tp, MDIO_MMD_AN,
+				  TG3_CL45_D7_EEERES_STAT, &val);
 
 		if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
 		    val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
@@ -2987,16 +2989,14 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
 		if (tp->link_config.autoneg == AUTONEG_ENABLE) {
 			/* Advertise 100-BaseTX EEE ability */
 			if (tp->link_config.advertising &
-			    (ADVERTISED_100baseT_Half |
-			     ADVERTISED_100baseT_Full))
-				val |= TG3_CL45_D7_EEEADV_CAP_100TX;
+			    ADVERTISED_100baseT_Full)
+				val |= MDIO_AN_EEE_ADV_100TX;
 			/* Advertise 1000-BaseT EEE ability */
 			if (tp->link_config.advertising &
-			    (ADVERTISED_1000baseT_Half |
-			     ADVERTISED_1000baseT_Full))
-				val |= TG3_CL45_D7_EEEADV_CAP_1000T;
+			    ADVERTISED_1000baseT_Full)
+				val |= MDIO_AN_EEE_ADV_1000T;
 		}
-		tg3_phy_cl45_write(tp, 0x7, TG3_CL45_D7_EEEADV_CAP, val);
+		tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
 
 		/* Turn off SM_DSP clock. */
 		val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 59b0e09..6e72c6b 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2172,9 +2172,6 @@
 #define MII_TG3_TEST1_CRC_EN		0x8000
 
 /* Clause 45 expansion registers */
-#define TG3_CL45_D7_EEEADV_CAP		0x003c
-#define TG3_CL45_D7_EEEADV_CAP_100TX	0x0002
-#define TG3_CL45_D7_EEEADV_CAP_1000T	0x0004
 #define TG3_CL45_D7_EEERES_STAT		0x803e
 #define TG3_CL45_D7_EEERES_STAT_LP_100TX	0x0002
 #define TG3_CL45_D7_EEERES_STAT_LP_1000T	0x0004
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index c779b49..b1494ac 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -55,6 +55,7 @@
 #define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
 #define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
 #define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
 
 /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
 #define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
@@ -235,6 +236,10 @@
 #define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
 #define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
 
+/* AN EEE Advertisement register. */
+#define MDIO_AN_EEE_ADV_100TX		0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T		0x0004	/* Advertise 1000T EEE cap */
+
 /* LASI RX_ALARM control/status registers. */
 #define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
 #define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
-- 
1.7.2.2