From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung•com>
To: Giuseppe Cavallaro <peppe.cavallaro@st•com>
Cc: netdev@vger•kernel.org
Subject: [PATCH] stmmac: fix init_dma_desc_rings() to handle errors
Date: Fri, 09 Aug 2013 14:02:08 +0200 [thread overview]
Message-ID: <1392383.ZcinuGX9SF@amdc1032> (raw)
In stmmac_init_rx_buffers():
* add missing handling of dma_map_single() error
* remove superfluous unlikely() optimization while at it
Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs().
In init_dma_desc_rings():
* add missing handling of kmalloc_array() errors
* fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors
* make function return an error value on error and 0 on success
In stmmac_open():
* add handling of init_dma_desc_rings() return value
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung•com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung•com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 111 ++++++++++++++++++----
1 file changed, 92 insertions(+), 19 deletions(-)
Index: b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
===================================================================
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c 2013-08-08 14:36:44.000000000 +0200
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c 2013-08-08 15:31:27.015438117 +0200
@@ -939,15 +939,20 @@ static int stmmac_init_rx_buffers(struct
skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN,
GFP_KERNEL);
- if (unlikely(skb == NULL)) {
+ if (!skb) {
pr_err("%s: Rx init fails; skb is NULL\n", __func__);
- return 1;
+ return -ENOMEM;
}
skb_reserve(skb, NET_IP_ALIGN);
priv->rx_skbuff[i] = skb;
priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
priv->dma_buf_sz,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) {
+ pr_err("%s: DMA mapping error\n", __func__);
+ dev_kfree_skb_any(skb);
+ return -EINVAL;
+ }
p->des2 = priv->rx_skbuff_dma[i];
@@ -958,6 +963,16 @@ static int stmmac_init_rx_buffers(struct
return 0;
}
+static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i)
+{
+ if (priv->rx_skbuff[i]) {
+ dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+ dev_kfree_skb_any(priv->rx_skbuff[i]);
+ }
+ priv->rx_skbuff[i] = NULL;
+}
+
/**
* init_dma_desc_rings - init the RX/TX descriptor rings
* @dev: net device structure
@@ -965,13 +980,14 @@ static int stmmac_init_rx_buffers(struct
* and allocates the socket buffers. It suppors the chained and ring
* modes.
*/
-static void init_dma_desc_rings(struct net_device *dev)
+static int init_dma_desc_rings(struct net_device *dev)
{
int i;
struct stmmac_priv *priv = netdev_priv(dev);
unsigned int txsize = priv->dma_tx_size;
unsigned int rxsize = priv->dma_rx_size;
unsigned int bfsize = 0;
+ int ret = -ENOMEM;
/* Set the max buffer size according to the DESC mode
* and the MTU. Note that RING mode allows 16KiB bsize.
@@ -992,34 +1008,60 @@ static void init_dma_desc_rings(struct n
dma_extended_desc),
&priv->dma_rx_phy,
GFP_KERNEL);
+ if (!priv->dma_erx)
+ goto err_dma;
+
priv->dma_etx = dma_alloc_coherent(priv->device, txsize *
sizeof(struct
dma_extended_desc),
&priv->dma_tx_phy,
GFP_KERNEL);
- if ((!priv->dma_erx) || (!priv->dma_etx))
- return;
+ if (!priv->dma_etx) {
+ dma_free_coherent(priv->device, priv->dma_rx_size *
+ sizeof(struct dma_extended_desc),
+ priv->dma_erx, priv->dma_rx_phy);
+ goto err_dma;
+ }
} else {
priv->dma_rx = dma_alloc_coherent(priv->device, rxsize *
sizeof(struct dma_desc),
&priv->dma_rx_phy,
GFP_KERNEL);
+ if (!priv->dma_rx)
+ goto err_dma;
+
priv->dma_tx = dma_alloc_coherent(priv->device, txsize *
sizeof(struct dma_desc),
&priv->dma_tx_phy,
GFP_KERNEL);
- if ((!priv->dma_rx) || (!priv->dma_tx))
- return;
+ if (!priv->dma_tx) {
+ dma_free_coherent(priv->device, priv->dma_rx_size *
+ sizeof(struct dma_desc),
+ priv->dma_rx, priv->dma_rx_phy);
+ goto err_dma;
+ }
}
priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t),
GFP_KERNEL);
+ if (!priv->rx_skbuff_dma)
+ goto err_rx_skbuff_dma;
+
priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *),
GFP_KERNEL);
+ if (!priv->rx_skbuff)
+ goto err_rx_skbuff;
+
priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t),
GFP_KERNEL);
+ if (!priv->tx_skbuff_dma)
+ goto err_tx_skbuff_dma;
+
priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *),
GFP_KERNEL);
+ if (!priv->tx_skbuff)
+ goto err_tx_skbuff;
+
if (netif_msg_probe(priv)) {
pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__,
(u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy);
@@ -1034,8 +1076,9 @@ static void init_dma_desc_rings(struct n
else
p = priv->dma_rx + i;
- if (stmmac_init_rx_buffers(priv, p, i))
- break;
+ ret = stmmac_init_rx_buffers(priv, p, i);
+ if (ret)
+ goto err_init_rx_buffers;
if (netif_msg_probe(priv))
pr_debug("[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
@@ -1081,20 +1124,44 @@ static void init_dma_desc_rings(struct n
if (netif_msg_hw(priv))
stmmac_display_rings(priv);
+
+ return 0;
+err_init_rx_buffers:
+ while (--i >= 0)
+ stmmac_free_rx_buffers(priv, i);
+ kfree(priv->tx_skbuff);
+err_tx_skbuff:
+ kfree(priv->tx_skbuff_dma);
+err_tx_skbuff_dma:
+ kfree(priv->rx_skbuff);
+err_rx_skbuff:
+ kfree(priv->rx_skbuff_dma);
+err_rx_skbuff_dma:
+ if (priv->extend_desc) {
+ dma_free_coherent(priv->device, priv->dma_tx_size *
+ sizeof(struct dma_extended_desc),
+ priv->dma_etx, priv->dma_tx_phy);
+ dma_free_coherent(priv->device, priv->dma_rx_size *
+ sizeof(struct dma_extended_desc),
+ priv->dma_erx, priv->dma_rx_phy);
+ } else {
+ dma_free_coherent(priv->device,
+ priv->dma_tx_size * sizeof(struct dma_desc),
+ priv->dma_tx, priv->dma_tx_phy);
+ dma_free_coherent(priv->device,
+ priv->dma_rx_size * sizeof(struct dma_desc),
+ priv->dma_rx, priv->dma_rx_phy);
+ }
+err_dma:
+ return ret;
}
static void dma_free_rx_skbufs(struct stmmac_priv *priv)
{
int i;
- for (i = 0; i < priv->dma_rx_size; i++) {
- if (priv->rx_skbuff[i]) {
- dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
- priv->dma_buf_sz, DMA_FROM_DEVICE);
- dev_kfree_skb_any(priv->rx_skbuff[i]);
- }
- priv->rx_skbuff[i] = NULL;
- }
+ for (i = 0; i < priv->dma_rx_size; i++)
+ stmmac_free_rx_buffers(priv, i);
}
static void dma_free_tx_skbufs(struct stmmac_priv *priv)
@@ -1560,12 +1627,17 @@ static int stmmac_open(struct net_device
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
- init_dma_desc_rings(dev);
+
+ ret = init_dma_desc_rings(dev);
+ if (ret < 0) {
+ pr_err("%s: DMA descriptors initialization failed\n", __func__);
+ goto dma_desc_error;
+ }
/* DMA initialization and SW reset */
ret = stmmac_init_dma_engine(priv);
if (ret < 0) {
- pr_err("%s: DMA initialization failed\n", __func__);
+ pr_err("%s: DMA engine initialization failed\n", __func__);
goto init_error;
}
@@ -1672,6 +1744,7 @@ wolirq_error:
init_error:
free_dma_desc_resources(priv);
+dma_desc_error:
if (priv->phydev)
phy_disconnect(priv->phydev);
phy_error:
next reply other threads:[~2013-08-09 12:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-09 12:02 Bartlomiej Zolnierkiewicz [this message]
2013-08-09 19:51 ` [PATCH] stmmac: fix init_dma_desc_rings() to handle errors Denis Kirjanov
2013-08-12 9:36 ` Bartlomiej Zolnierkiewicz
2013-08-12 13:46 ` Denis Kirjanov
2013-08-13 5:11 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392383.ZcinuGX9SF@amdc1032 \
--to=b.zolnierkie@samsung$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=peppe.cavallaro@st$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox