Subject: Re: [PATCH v2 net-next 0/5] net: stmmac: enable multi-vector MSI

From: [email-masked]
Date: Fri, 26 Mar 2021 21:50:10 +0000

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Fri, 26 Mar 2021 01:39:11 +0800 you wrote:
> This patchset adds support for multi MSI interrupts in addition to
> current single common interrupt implementation. Each MSI interrupt is tied
> to a newly introduce interrupt service routine(ISR). Hence, each interrupt
> will only go through the corresponding ISR.
> 
> In order to increase the efficiency, enabling multi MSI interrupt will
> automatically select the interrupt mode configuration INTM=1. When INTM=1,
> the TX/RX transfer complete signal will only asserted on corresponding
> sbd_perch_tx_intr_o[] or sbd_perch_rx_intr_o[] without asserting signal
> on the common sbd_intr_o. Hence, for each TX/RX interrupts, only the
> corresponding ISR will be triggered.
> 
> [...]

Here is the summary with links:
  - [v2,net-next,1/5] net: stmmac: introduce DMA interrupt status masking per traffic direction
    https://git.kernel.org/netdev/net-next/c/7e1c520c0d20
  - [v2,net-next,2/5] net: stmmac: make stmmac_interrupt() function more friendly to MSI
    https://git.kernel.org/netdev/net-next/c/29e6573c61aa
  - [v2,net-next,3/5] net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX
    https://git.kernel.org/netdev/net-next/c/8532f613bc78
  - [v2,net-next,4/5] stmmac: intel: add support for multi-vector msi and msi-x
    https://git.kernel.org/netdev/net-next/c/b42446b9b37b
  - [v2,net-next,5/5] net: stmmac: use interrupt mode INTM=1 for multi-MSI
    https://git.kernel.org/netdev/net-next/c/6ccf12ae111e

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html