Subject: Re: [PATCH net-next v2 2/8] dt-bindings: phy: add the "fsl,lynx-28g" compatible

From: Rob Herring <[email-masked]>
Date: Wed, 09 Mar 2022 16:20:55 -0600

On Wed, 09 Mar 2022 19:27:42 +0200, Ioana Ciornei wrote:
> Describe the "fsl,lynx-28g" compatible used by the Lynx 28G SerDes PHY
> driver on Layerscape based SoCs.
> 
> Signed-off-by: Ioana Ciornei <[email-masked]>
> ---
> Changes in v2:
> 	- none
> 
>  .../devicetree/bindings/phy/fsl,lynx-28g.yaml | 71 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: example-0: serdes_phy@1ea0000:reg:0: [0, 32112640, 0, 7728] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: serdes_phy@1ea0000: #phy-cells:0:0: 0 was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: serdes_phy@1ea0000: '#address-cells', '#size-cells', 'phy@0', 'phy@1', 'phy@2', 'phy@3', 'phy@4', 'phy@5', 'phy@6', 'phy@7' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1603505

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.