Subject: Re: [PATCH net-next v2 0/2] net: phy: qcom: qca808x: fill in possible_interfaces

From: [email-masked]
Date: Fri, 01 Mar 2024 09:00:29 +0000

Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <[email-masked]>:

On Wed, 28 Feb 2024 18:24:08 +0100 you wrote:
> QCA808x does not currently fill in the possible_interfaces.
> 
> This leads to Phylink not being aware that it supports 2500Base-X as well
> so in cases where it is connected to a DSA switch like MV88E6393 it will
> limit that port to phy-mode set in the DTS.
> 
> That means that if SGMII is used you are limited to 1G only while if
> 2500Base-X was set you are limited to 2.5G only.
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/2] net: phy: qcom: qca808x: add helper for checking for 1G only model
    https://git.kernel.org/netdev/net-next/c/f058b2dd70b1
  - [net-next,v2,2/2] net: phy: qcom: qca808x: fill in possible_interfaces
    https://git.kernel.org/netdev/net-next/c/cb28f7029606

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html