Subject: Re: [PATCH net-next v2 0/2] r8169: add support for RTL8127ATF (10G Fiber SFP)

From: [email-masked]
Date: Tue, 13 Jan 2026 03:30:20 +0000

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <[email-masked]>:

On Sat, 10 Jan 2026 16:12:30 +0100 you wrote:
> RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
> DAC). The list of supported modes was provided by Realtek. According to the
> r8127 vendor driver also 1G modules are supported, but this needs some more
> complexity in the driver, and only 10G mode has been tested so far.
> Therefore mainline support will be limited to 10G for now.
> The SFP port signals are hidden in the chip IP and driven by firmware.
> Therefore mainline SFP support can't be used here.
> The PHY driver is used by the RTL8127ATF support in r8169.
> RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
> PHY ID.
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/2] net: phy: realtek: add dummy PHY driver for RTL8127ATF
    https://git.kernel.org/netdev/net-next/c/c4277d21ab69
  - [net-next,v2,2/2] r8169: add support for RTL8127ATF (Fiber SFP)
    https://git.kernel.org/netdev/net-next/c/fef0f545511f

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html