Subject: Re: [PATCH] b44 ethtool_ops

From: Pekka Pietikainen <[email-masked]>
Date: Fri, 7 May 2004 14:12:36 +0300

On Tue, May 04, 2004 at 04:19:39PM -0400, Jeff Garzik wrote:
> Testing requested.
> 
> Should see no ethtool behavior change, positive or negative.
Well, driver still works, advertised link modes does look a bit odd though
(ethtool-1.8-3.1)

Settings for eth1:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseT/Full 
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Current message level: 0x000000ff (255)
        Link detected: yes