Subject: Re: ing_filter debug messages

From: Wichert Akkerman <[email-masked]>
Date: Fri, 31 Dec 2004 10:38:27 +0100

Previously jamal wrote:
> The emssage is useful but debug (mostly). 
> Whats your ifconfig look like? Have some tunnels in there maybe?

three ethernet interfaces and a ipv6/ip tunnel. Here is the ifconfig
output:

eth0      Link encap:Ethernet  HWaddr 00:50:04:0B:DD:79
          inet addr:192.168.10.1  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::250:4ff:fe0b:dd79/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:673540 errors:0 dropped:0 overruns:0 frame:0
          TX packets:668357 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:229549898 (218.9 MiB)  TX bytes:465650601 (444.0 MiB)
          Interrupt:11 Base address:0xec00

eth1      Link encap:Ethernet  HWaddr 00:90:27:BE:60:55
          inet addr:194.109.254.66  Bcast:255.255.255.255  Mask:255.255.255.0
          inet6 addr: fe80::290:27ff:febe:6055/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1276385 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1172898 errors:0 dropped:0 overruns:0 carrier:0
          collisions:1128 txqueuelen:1000
          RX bytes:1332651102 (1.2 GiB)  TX bytes:293617934 (280.0 MiB)

eth2      Link encap:Ethernet  HWaddr 00:90:27:BE:4B:EC
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: 2001:888:101d::1/64 Scope:Global
          inet6 addr: fe80::290:27ff:febe:4bec/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:713928 errors:0 dropped:0 overruns:0 frame:0
          TX packets:752929 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:111560554 (106.3 MiB)  TX bytes:860040830 (820.1 MiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:33261 errors:0 dropped:0 overruns:0 frame:0
          TX packets:33261 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3401641 (3.2 MiB)  TX bytes:3401641 (3.2 MiB)

xs4all    Link encap:IPv6-in-IPv4
          inet6 addr: 2001:888:10:1d::2/64 Scope:Global
          inet6 addr: fe80::c26d:fe42/64 Scope:Link
          inet6 addr: fe80::c0a8:a01/64 Scope:Link
          inet6 addr: fe80::c0a8:102/64 Scope:Link
          inet6 addr: fe80::c0a8:101/64 Scope:Link
          UP POINTOPOINT RUNNING NOARP  MTU:1480  Metric:1
          RX packets:128 errors:0 dropped:0 overruns:0 frame:0
          TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:95545 (93.3 KiB)  TX bytes:19613 (19.1 KiB)

there is also a secondary address on eth2 which ifconfig does not show.

> Whats your netfilter setup? 

One chain attached to the FORWARD chain and two to the OUTPUT chain,
all pretty simple.

Wichert.

-- 
Wichert Akkerman <[email-masked]>    It is simple to make things.
http://www.wiggy.net/                   It is hard to make things simple.