From: Michael Buesch <mb@bu3sch•de>
To: Larry Finger <Larry.Finger@lwfinger•net>
Cc: linville@tuxdriver•com, bcm43xx-dev@lists•berlios.de,
netdev@vger•kernel.org
Subject: Re: Please pull bcm43xx-d80211 bugfixes and new features
Date: Tue, 3 Oct 2006 13:58:33 +0200 [thread overview]
Message-ID: <200610031358.33760.mb@bu3sch.de> (raw)
In-Reply-To: <4521DCBB.2030201@lwfinger.net>
On Tuesday 03 October 2006 05:44, Larry Finger wrote:
> Michael Buesch wrote:
> > Hi John,
> >
> > Please pull from my tree
> > git pull http://bu3sch.de/git/wireless-dev.git for-linville
> >
> > This will pull various bugfixes and feature improvements.
> > Most noteably it will pull a bugfix for a crash introduced
> > by an earlier patch to d80211 which changed RX status information
> > handling.
> >
> > The new features include support for the new v4 firmware.
> > I also did my homework to get better support for OpenWRT
> > devices in ssb.
> >
> >
> > The list of pulled changesets is:
> >
> > Michael Buesch:
> > ssb: Abstract bus accesses.
> > bcm43xx-d80211: convert to ssb abstract bus access API
> > bcm43xx-d80211: Don't crash if we use v4 firmware.
> > bcm43xx-d80211: Always make fwpostfix option available.
> > bcm43xx-d80211: Firmware revision/patchlevel detection.
> > bcm43xx-d80211: Add support for v4 firmware.
> > bcm43xx-d80211: add SHM constants
> > bcm43xx-d80211: Don't use low level netif and ieee80211_netif_oper functions.
> > bcm43xx-d80211: DMA-mask fixes.
> > bcm43xx-d80211: Remove some BCM947XX ifdefs,
> > Merge branch 'master' of git://kernel.org/.../linville/wireless-dev
> > bcm43xx-d80211: Assign all fields in the RX status report.
> > bcm43xx-d80211: Set channel cookie to prevent ghost packets.
> > bcm43xx-d80211: Prevent crash by setting active wlcore to NULL on wlcore-select failure.
> >
> >
> > The diffstat is:
> >
> > drivers/misc/ssb.c | 431 ++++++-----
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx.h | 143 +++
> > .../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.c | 295 +++-----
> > .../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.h | 35 -
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c | 149 ++--
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.h | 18
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c | 16
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c | 820 +++++++++-----------
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c | 76 +-
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c | 104 +--
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.h | 12
> > .../net/wireless/d80211/bcm43xx/bcm43xx_power.c | 125 +---
> > .../net/wireless/d80211/bcm43xx/bcm43xx_radio.c | 143 ++--
> > .../net/wireless/d80211/bcm43xx/bcm43xx_radio.h | 1
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.c | 309 +++++++-
> > drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.h | 247 +++++-
> > include/linux/ssb.h | 71 +-
> > 17 files changed, 1681 insertions(+), 1314 deletions(-)
> >
> Michael,
>
> There is something wrong with wireless-dev after I pulled your changes. The logs are:
>
> kernel: ssb: Core 0 found: cc 0800, rev 02, vendor 4243
> kernel: ssb: Core 1 found: cc 0812, rev 04, vendor 4243
> kernel: ssb: Core 2 found: cc 080D, rev 01, vendor 4243
> kernel: ssb: Core 3 found: cc 0807, rev 01, vendor 4243
> kernel: ssb: Core 4 found: cc 0804, rev 07, vendor 4243
> kernel: ssb: Core 5 found: cc 0812, rev 04, vendor 4243
> kernel: bcm43xx_d80211: Ignoring additional 802.11 core.
> kernel: bcm43xx_d80211: Broadcom 4306 WLAN found
> kernel: ssb: Switching to core 4
> kernel: bcm43xx_d80211: PHY connected
> kernel: ssb: Switching to core 1
> kernel: bcm43xx_d80211: Detected PHY: Version: 1, Type 2, Revision 1
> kernel: bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
> kernel: bcm43xx_d80211: Radio turned off
> kernel: bcm43xx_d80211: Radio turned off
> kernel: wmaster0: Selected rate control algorithm 'simple'
> kernel: bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 4, MAC: 00
> :06:25:40:6f:03)
> kernel: bcm43xx_d80211: PHY connected
> kernel: bcm43xx_d80211: PHY disconnected
> kernel: bcm43xx_d80211: PHY connected
> kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248
> 29:46:18
Uhm, which firmware are you running?
> kernel: ssb: Switching to core 0
> kernel: ssb: Switching to core 1
> kernel: bcm43xx_d80211: Radio turned on
> kernel: bcm43xx_d80211: Chip initialized
> kernel: bcm43xx_d80211: 30-bit DMA initialized
> kernel: bcm43xx_d80211: TODO: Incomplete code in keymac_write() at
> drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c:871
> .....
> kernel: bcm43xx_d80211: Keys cleared
> kernel: bcm43xx_d80211: Selected 802.11 core (phytype 2)
> kernel: wmaster0: Does not support passive scan, disabled
> kernel: wlan1: starting scan
> kernel: HW CONFIG: channel=1 freq=2412 phymode=3
> kernel: HW CONFIG: channel=2 freq=2417 phymode=3
> kernel: bcm43xx_d80211: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
> kernel: bcm43xx_d80211: ASSERTION FAILED (0) at:
> drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1020:parse_cookie()
> kernel: bcm43xx_d80211: ASSERTION FAILED (ring && *slot >= 0 && *slot < ring->nr_slots) at:
> drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1023:parse_cookie()
> kernel: bcm43xx_d80211: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
> kernel: bcm43xx_d80211: ASSERTION FAILED (0) at:
> drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1020:parse_cookie()
> kernel: bcm43xx_d80211: ASSERTION FAILED (ring && *slot >= 0 && *slot < ring->nr_
> slots) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1023:parse_cookie()
>
> If you need any other info, please contact me.
>
> Larry
>
--
Greetings Michael.
next prev parent reply other threads:[~2006-10-03 11:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-02 16:43 Please pull bcm43xx-d80211 bugfixes and new features Michael Buesch
2006-10-03 3:44 ` Larry Finger
2006-10-03 11:58 ` Michael Buesch [this message]
[not found] ` <200610031358.33760.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
2006-10-03 12:36 ` Martin Langer
2006-10-03 13:05 ` Michael Buesch
2006-10-03 14:36 ` Larry Finger
[not found] ` <45227569.6070901-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
2006-10-03 14:48 ` Michael Buesch
2006-10-03 15:07 ` Larry Finger
2006-10-03 15:12 ` Martin Langer
2006-10-03 15:14 ` Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200610031358.33760.mb@bu3sch.de \
--to=mb@bu3sch$(echo .)de \
--cc=Larry.Finger@lwfinger$(echo .)net \
--cc=bcm43xx-dev@lists$(echo .)berlios.de \
--cc=linville@tuxdriver$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox