Subject: Re: [PATCH 2/2] [TULIP] Check the return value from pci_set_mwi()

From: Grant Grundler <[email-masked]>
Date: Fri, 6 Oct 2006 23:34:48 -0600

On Fri, Oct 06, 2006 at 03:59:57PM -0400, Jeff Garzik wrote:
> The unmodified tulip driver checks both MWI and cacheline-size because 
> one of the clones (PNIC or PNIC2) will let you set the MWI bit, but 
> hardwires cacheline size to zero.

Maybe the generic pci_set_mwi() can verify cacheline size is non-zero?
I don't think each driver should need to enforce this.

> If the arches do not behave consistently, we need to keep the check in 
> the tulip driver, to avoid incorrectly programming the csr0 MWI bit.

Why not fix the arches to be consistent?
There's alot more drivers than arches...and we have control
of the arch specific PCI support.

thanks,
grant