Subject: [PATCH 19/22] e1000: Don't set tipg (fiber) timings for pci-e adapters to fix fiber output

From: "Kok, Auke" <[email-masked]>
Date: Fri, 08 Dec 2006 15:03:27 -0800

the driver has (ancient) code for messing with TIPG from the 82542 days.
Unfortunately this code was running on our current adapters and setting
TIPG for fiber to be +1 over the copper value.  This caused 1.45Mpps
to be sent instead of 1.487Mpps.

Signed-off-by: Jesse Brandeburg <[email-masked]>
Signed-off-by: Auke Kok <[email-masked]>
---

 drivers/net/e1000/e1000_main.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 34ceff1..1a2b052 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1669,9 +1669,9 @@ e1000_configure_tx(struct e1000_adapter 
 	}
 
 	/* Set the default values for the Tx Inter Packet Gap timer */
-
-	if (hw->media_type == e1000_media_type_fiber ||
-	    hw->media_type == e1000_media_type_internal_serdes)
+	if (adapter->hw.mac_type <= e1000_82547_rev_2 &&
+	    (hw->media_type == e1000_media_type_fiber ||
+	     hw->media_type == e1000_media_type_internal_serdes))
 		tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
 	else
 		tipg = DEFAULT_82543_TIPG_IPGT_COPPER;

---
Auke Kok <[email-masked]>