Subject: [PATCH 13/19] e1000: Add 82571 specific hardware code.

From: Auke Kok <[email-masked]>
Date: Thu, 29 Mar 2007 09:40:24 -0700

From: Jeb Cramer <[email-masked]>

Adapter-specific code for the 82571.

Signed-off-by: Jeb Cramer <[email-masked]>
Signed-off-by: Auke Kok <[email-masked]>
---

 drivers/net/e1000/e1000_82571.c | 1333 +++++++++++++++++++++++++++++++++++++++
 drivers/net/e1000/e1000_82571.h |   42 +
 2 files changed, 1375 insertions(+), 0 deletions(-)

diff --git a/drivers/net/e1000/e1000_82571.c b/drivers/net/e1000/e1000_82571.c
new file mode 100644
index 0000000..32e11a5
--- /dev/null
+++ b/drivers/net/e1000/e1000_82571.c
@@ -0,0 +1,1333 @@
+/*******************************************************************************
+
+  Intel PRO/1000 Linux driver
+  Copyright(c) 1999 - 2007 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <[email-masked]>
+  e1000-devel Mailing List <[email-masked]>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_82571
+ * e1000_82572
+ * e1000_82573
+ */
+
+#include "e1000_82571.h"
+
+void e1000_init_function_pointers_82571(struct e1000_hw *hw);
+
+static s32  e1000_init_phy_params_82571(struct e1000_hw *hw);
+static s32  e1000_init_nvm_params_82571(struct e1000_hw *hw);
+static s32  e1000_init_mac_params_82571(struct e1000_hw *hw);
+static s32  e1000_acquire_nvm_82571(struct e1000_hw *hw);
+static void e1000_release_nvm_82571(struct e1000_hw *hw);
+static s32  e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset,
+                                  u16 words, u16 *data);
+static s32  e1000_update_nvm_checksum_82571(struct e1000_hw *hw);
+static s32  e1000_validate_nvm_checksum_82571(struct e1000_hw *hw);
+static s32  e1000_get_cfg_done_82571(struct e1000_hw *hw);
+static s32  e1000_set_d0_lplu_state_82571(struct e1000_hw *hw,
+                                          boolean_t active);
+static s32  e1000_reset_hw_82571(struct e1000_hw *hw);
+static s32  e1000_init_hw_82571(struct e1000_hw *hw);
+static void e1000_clear_vfta_82571(struct e1000_hw *hw);
+static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw,
+                                            u8 *mc_addr_list, u32 mc_addr_count,
+                                            u32 rar_used_count, u32 rar_count);
+static s32  e1000_setup_link_82571(struct e1000_hw *hw);
+static s32  e1000_setup_copper_link_82571(struct e1000_hw *hw);
+static s32  e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32  e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data);
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static s32  e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
+static s32  e1000_get_phy_id_82571(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
+static s32  e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+                                       u16 words, u16 *data);
+
+struct e1000_dev_spec_82571 {
+	boolean_t laa_is_present;
+};
+
+/**
+ *  e1000_init_phy_params_82571 - Init PHY func ptrs.
+ *  @hw: pointer to the HW structure
+ *
+ *  This is a function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_phy_params_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	struct e1000_functions *func = &hw->func;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_init_phy_params_82571");
+
+	if (hw->media_type != e1000_media_type_copper) {
+		phy->type        = e1000_phy_none;
+		goto out;
+	}
+
+	phy->addr                        = 1;
+	phy->autoneg_mask                = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us              = 100;
+
+	func->acquire_phy                = e1000_get_hw_semaphore_generic;
+	func->check_polarity             = e1000_check_polarity_igp;
+	func->check_reset_block          = e1000_check_reset_block_generic;
+	func->release_phy                = e1000_put_hw_semaphore_generic;
+	func->reset_phy                  = e1000_phy_hw_reset_generic;
+	func->set_d0_lplu_state          = e1000_set_d0_lplu_state_82571;
+	func->set_d3_lplu_state          = e1000_set_d3_lplu_state_generic;
+
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		phy->type                = e1000_phy_igp_2;
+		func->get_cfg_done       = e1000_get_cfg_done_82571;
+		func->get_phy_info       = e1000_get_phy_info_igp;
+		func->force_speed_duplex = e1000_phy_force_speed_duplex_igp;
+		func->get_cable_length   = e1000_get_cable_length_igp_2;
+		func->read_phy_reg       = e1000_read_phy_reg_igp;
+		func->write_phy_reg      = e1000_write_phy_reg_igp;
+		break;
+	case e1000_82573:
+		phy->type                = e1000_phy_m88;
+		func->get_cfg_done       = e1000_get_cfg_done_generic;
+		func->get_phy_info       = e1000_get_phy_info_m88;
+		func->commit_phy         = e1000_phy_sw_reset_generic;
+		func->force_speed_duplex = e1000_phy_force_speed_duplex_m88;
+		func->get_cable_length   = e1000_get_cable_length_m88;
+		func->read_phy_reg       = e1000_read_phy_reg_m88;
+		func->write_phy_reg      = e1000_write_phy_reg_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+		break;
+	}
+
+	/* This can only be done after all function pointers are setup. */
+	ret_val = e1000_get_phy_id_82571(hw);
+
+	/* Verify phy id */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		if (phy->id != IGP01E1000_I_PHY_ID) {
+			ret_val = -E1000_ERR_PHY;
+			goto out;
+		}
+		break;
+	case e1000_82573:
+		if (phy->id != M88E1111_I_PHY_ID) {
+			ret_val = -E1000_ERR_PHY;
+			goto out;
+		}
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+		break;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
+ *  @hw: pointer to the HW structure
+ *
+ *  This is a function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_nvm_params_82571(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_functions *func = &hw->func;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	u16 size;
+
+	DEBUGFUNC("e1000_init_nvm_params_82571");
+
+	nvm->opcode_bits          = 8;
+	nvm->delay_usec           = 1;
+	switch (nvm->override) {
+	case e1000_nvm_override_spi_large:
+		nvm->page_size    = 32;
+		nvm->address_bits = 16;
+		break;
+	case e1000_nvm_override_spi_small:
+		nvm->page_size    = 8;
+		nvm->address_bits = 8;
+		break;
+	default:
+		nvm->page_size    = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+		nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+		break;
+	}
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+		if (((eecd >> 15) & 0x3) == 0x3) {
+			nvm->type = e1000_nvm_flash_hw;
+			nvm->word_size = 2048;
+			/* Autonomous Flash update bit must be cleared due
+			 * to Flash update issue.
+			 */
+			eecd &= ~E1000_EECD_AUPDEN;
+			E1000_WRITE_REG(hw, E1000_EECD, eecd);
+			break;
+		}
+		/* Fall Through */
+	default:
+		nvm->type	= e1000_nvm_eeprom_spi;
+		size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+		                  E1000_EECD_SIZE_EX_SHIFT);
+		/* Added to a constant, "size" becomes the left-shift value
+		 * for setting word_size.
+		 */
+		size += NVM_WORD_SIZE_BASE_SHIFT;
+		nvm->word_size	= 1 << size;
+		break;
+	}
+
+	/* Function Pointers */
+	func->acquire_nvm       = e1000_acquire_nvm_82571;
+	func->read_nvm          = (hw->mac.type == e1000_82573)
+	                          ? e1000_read_nvm_eerd
+	                          : e1000_read_nvm_spi;
+	func->release_nvm       = e1000_release_nvm_82571;
+	func->update_nvm        = e1000_update_nvm_checksum_82571;
+	func->validate_nvm      = e1000_validate_nvm_checksum_82571;
+	func->valid_led_default = e1000_valid_led_default_82571;
+	func->write_nvm         = e1000_write_nvm_82571;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_init_mac_params_82571 - Init MAC func ptrs.
+ *  @hw: pointer to the HW structure
+ *
+ *  This is a function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_mac_params_82571(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	struct e1000_functions *func = &hw->func;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_init_mac_params_82571");
+
+	/* Set media type */
+	switch (hw->device_id) {
+	case E1000_DEV_ID_82571EB_FIBER:
+	case E1000_DEV_ID_82572EI_FIBER:
+	case E1000_DEV_ID_82571EB_QUAD_FIBER:
+		hw->media_type = e1000_media_type_fiber;
+		break;
+	case E1000_DEV_ID_82571EB_SERDES:
+	case E1000_DEV_ID_82572EI_SERDES:
+		hw->media_type = e1000_media_type_internal_serdes;
+		break;
+	default:
+		hw->media_type = e1000_media_type_copper;
+		break;
+	}
+
+	/* Set mta register count */
+	mac->mta_reg_count = 128;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_RAR_ENTRIES;
+	/* Set if part includes ASF firmware */
+	mac->asf_firmware_present = TRUE;
+	/* Set if manageability features are enabled. */
+	mac->arc_subsystem_valid =
+	        (E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK)
+	                ? TRUE : FALSE;
+
+	/* Function pointers */
+
+	/* bus type/speed/width */
+	func->get_bus_info = e1000_get_bus_info_pcie_generic;
+	/* reset */
+	func->reset_hw = e1000_reset_hw_82571;
+	/* hw initialization */
+	func->init_hw = e1000_init_hw_82571;
+	/* link setup */
+	func->setup_link = e1000_setup_link_82571;
+	/* physical interface link setup */
+	func->setup_physical_interface =
+	        (hw->media_type == e1000_media_type_copper)
+	                ? e1000_setup_copper_link_82571
+	                : e1000_setup_fiber_serdes_link_82571;
+	/* check for link */
+	switch (hw->media_type) {
+	case e1000_media_type_copper:
+		func->check_for_link = e1000_check_for_copper_link_generic;
+		break;
+	case e1000_media_type_fiber:
+		func->check_for_link = e1000_check_for_fiber_link_generic;
+		break;
+	case e1000_media_type_internal_serdes:
+		func->check_for_link = e1000_check_for_serdes_link_generic;
+		break;
+	default:
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+		break;
+	}
+	/* check management mode */
+	func->check_mng_mode = e1000_check_mng_mode_generic;
+	/* multicast address update */
+	func->mc_addr_list_update = e1000_mc_addr_list_update_82571;
+	/* writing VFTA */
+	func->write_vfta = e1000_write_vfta_generic;
+	/* clearing VFTA */
+	func->clear_vfta = e1000_clear_vfta_82571;
+	/* setting MTA */
+	func->mta_set = e1000_mta_set_generic;
+	/* blink LED */
+	func->blink_led = e1000_blink_led_generic;
+	/* setup LED */
+	func->setup_led = e1000_setup_led_generic;
+	/* cleanup LED */
+	func->cleanup_led = e1000_cleanup_led_generic;
+	/* turn on/off LED */
+	func->led_on = e1000_led_on_generic;
+	func->led_off = e1000_led_off_generic;
+	/* remove device */
+	func->remove_device = e1000_remove_device_generic;
+	/* clear hardware counters */
+	func->clear_hw_cntrs = e1000_clear_hw_cntrs_82571;
+	/* link info */
+	func->get_link_up_info =
+	        (hw->media_type == e1000_media_type_copper)
+	                ? e1000_get_speed_and_duplex_copper_generic
+	                : e1000_get_speed_and_duplex_fiber_serdes_generic;
+
+	hw->dev_spec_size = sizeof(struct e1000_dev_spec_82571);
+
+	/* Device-specific structure allocation */
+	ret_val = e1000_alloc_zeroed_dev_spec_struct(hw, hw->dev_spec_size);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_function_pointers_82571 - Init func ptrs.
+ *  @hw: pointer to the HW structure
+ *
+ *  The only function explicitly called by the api module to initialize
+ *  all function pointers and parameters.
+ **/
+void
+e1000_init_function_pointers_82571(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_init_function_pointers_82571");
+
+	hw->func.init_mac_params = e1000_init_mac_params_82571;
+	hw->func.init_nvm_params = e1000_init_nvm_params_82571;
+	hw->func.init_phy_params = e1000_init_phy_params_82571;
+}
+
+/**
+ *  e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY registers and stores the PHY ID and possibly the PHY
+ *  revision in the hardware structure.
+ **/
+static s32
+e1000_get_phy_id_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_get_phy_id_82571");
+
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		/* The 82571 firmware may still be configuring the PHY.
+		 * In this case, we cannot access the PHY until the
+		 * configuration is done.  So we explicitly set the
+		 * PHY ID. */
+		phy->id = IGP01E1000_I_PHY_ID;
+		break;
+	case e1000_82573:
+		ret_val = e1000_get_phy_id(hw);
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  To gain access to the EEPROM, first we must obtain a hardware semaphore.
+ *  Then for non-82573 hardware, set the EEPROM access request bit and wait
+ *  for EEPROM access grant bit.  If the access grant bit is not set, release
+ *  hardware semaphore.
+ **/
+static s32
+e1000_acquire_nvm_82571(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_acquire_nvm_82571");
+
+	ret_val = e1000_get_hw_semaphore_generic(hw);
+	if (ret_val)
+		goto out;
+
+	if (hw->mac.type != e1000_82573)
+		ret_val = e1000_acquire_nvm_generic(hw);
+
+	if (ret_val)
+		e1000_put_hw_semaphore_generic(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_release_nvm_82571 - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+static void
+e1000_release_nvm_82571(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_release_nvm_82571");
+
+	e1000_release_nvm_generic(hw);
+	e1000_put_hw_semaphore_generic(hw);
+}
+
+/**
+ *  e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  For non-82573 silicon, write data to EEPROM at offset using SPI interface.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function, the
+ *  EEPROM will most likley contain an invalid checksum.
+ **/
+static s32
+e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_write_nvm_82571");
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+		ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
+		break;
+	case e1000_82571:
+	case e1000_82572:
+		ret_val = e1000_write_nvm_spi(hw, offset, words, data);
+		break;
+	default:
+		ret_val = -E1000_ERR_NVM;
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_update_nvm_checksum_82571 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+static s32
+e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
+{
+	u32 eecd;
+	s32 ret_val;
+	u16 i;
+
+	DEBUGFUNC("e1000_update_nvm_checksum_82571");
+
+	ret_val = e1000_update_nvm_checksum_generic(hw);
+	if (ret_val)
+		goto out;
+
+	/* If our nvm is an EEPROM, then we're done
+	 * otherwise, commit the checksum to the flash NVM. */
+	if (hw->nvm.type != e1000_nvm_flash_hw)
+		goto out;
+
+	/* Check for pending operations. */
+	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+		msleep(1);
+		if ((E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_FLUPD) == 0)
+			break;
+	}
+
+	if (i == E1000_FLASH_UPDATES) {
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	/* Reset the firmware if using STM opcode. */
+	if ((E1000_READ_REG(hw, E1000_FLOP) & 0xFF00) == E1000_STM_OPCODE) {
+		/* The enabling of and the actual reset must be done
+		 * in two write cycles.
+		 */
+		E1000_WRITE_REG(hw, E1000_HICR, E1000_HICR_FW_RESET_ENABLE);
+		E1000_WRITE_FLUSH(hw);
+		E1000_WRITE_REG(hw, E1000_HICR, E1000_HICR_FW_RESET);
+	}
+
+	/* Commit the write to flash */
+	eecd = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD;
+	E1000_WRITE_REG(hw, E1000_EECD, eecd);
+
+	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+		msleep(1);
+		if ((E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_FLUPD) == 0)
+			break;
+	}
+
+	if (i == E1000_FLASH_UPDATES) {
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32
+e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_validate_nvm_checksum_82571");
+
+	if (hw->nvm.type == e1000_nvm_flash_hw)
+		e1000_fix_nvm_checksum_82571(hw);
+
+	return e1000_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ *  e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  After checking for invalid values, poll the EEPROM to ensure the previous
+ *  command has completed before trying to write the next word.  After write
+ *  poll for completion.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function, the
+ *  EEPROM will most likley contain an invalid checksum.
+ **/
+static s32
+e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words,
+                           u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, eewr = 0;
+	s32 ret_val = 0;
+
+	DEBUGFUNC("e1000_write_nvm_eewr_82571");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words. */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
+		       ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+		       E1000_NVM_RW_REG_START;
+
+		ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+		if (ret_val)
+			break;
+
+		E1000_WRITE_REG(hw, E1000_EEWR, eewr);
+
+		ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+		if (ret_val)
+			break;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cfg_done_82571 - Poll for configuration done
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the management control register for the config done bit to be set.
+ **/
+static s32
+e1000_get_cfg_done_82571(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_get_cfg_done_82571");
+
+	while (timeout) {
+		if (E1000_READ_REG(hw, E1000_EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
+			break;
+		msleep(1);
+		timeout--;
+	}
+	if (!timeout) {
+		DEBUGOUT("MNG configuration cycle has not completed.\n");
+		ret_val = -E1000_ERR_RESET;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: TRUE to enable LPLU, FALSE to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
+ *  this function also disables smart speed and vice versa.  LPLU will not be
+ *  activated unless the device autonegotiation advertisement meets standards
+ *  of either 10 or 10/100 or 10/100/1000 at all duplexes.  This is a function
+ *  pointer entry point only called by PHY setup routines.
+ **/
+static s32
+e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, boolean_t active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("e1000_set_d0_lplu_state_82571");
+
+	ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		goto out;
+
+	if (active) {
+		data |= IGP02E1000_PM_D0_LPLU;
+		ret_val = e1000_write_phy_reg(hw,
+		                              IGP02E1000_PHY_POWER_MGMT,
+		                              data);
+		if (ret_val)
+			goto out;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1000_read_phy_reg(hw,
+		                             IGP01E1000_PHY_PORT_CONFIG,
+		                             &data);
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1000_write_phy_reg(hw,
+		                              IGP01E1000_PHY_PORT_CONFIG,
+		                              data);
+		if (ret_val)
+			goto out;
+	} else {
+		data &= ~IGP02E1000_PM_D0_LPLU;
+		ret_val = e1000_write_phy_reg(hw,
+		                              IGP02E1000_PHY_POWER_MGMT,
+		                              data);
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained. */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1000_read_phy_reg(hw,
+			                             IGP01E1000_PHY_PORT_CONFIG,
+			                             &data);
+			if (ret_val)
+				goto out;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1000_write_phy_reg(hw,
+			                             IGP01E1000_PHY_PORT_CONFIG,
+			                             data);
+			if (ret_val)
+				goto out;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1000_read_phy_reg(hw,
+			                             IGP01E1000_PHY_PORT_CONFIG,
+			                             &data);
+			if (ret_val)
+				goto out;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1000_write_phy_reg(hw,
+			                             IGP01E1000_PHY_PORT_CONFIG,
+			                             data);
+			if (ret_val)
+				goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_reset_hw_82571 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state.  This is a
+ *  function pointer entry point called by the api module.
+ **/
+static s32
+e1000_reset_hw_82571(struct e1000_hw *hw)
+{
+	u32 ctrl, extcnf_ctrl, ctrl_ext, icr;
+	s32 ret_val;
+	u16 i = 0;
+
+	DEBUGFUNC("e1000_reset_hw_82571");
+
+	/* Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000_disable_pcie_master_generic(hw);
+	if (ret_val) {
+		DEBUGOUT("PCI-E Master disable polling has failed.\n");
+	}
+
+	DEBUGOUT("Masking off all interrupts\n");
+	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+
+	E1000_WRITE_REG(hw, E1000_RCTL, 0);
+	E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
+	E1000_WRITE_FLUSH(hw);
+
+	msleep(10);
+
+	/* Must acquire the MDIO ownership before MAC reset.
+	 * Ownership defaults to firmware after a reset. */
+	if (hw->mac.type == e1000_82573) {
+		extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+		do {
+			E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
+			extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
+
+			if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+				break;
+
+			extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+			msleep(2);
+			i++;
+		} while (i < MDIO_OWNERSHIP_TIMEOUT);
+	}
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+	DEBUGOUT("Issuing a global reset to MAC\n");
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+	if (hw->nvm.type == e1000_nvm_flash_hw) {
+		udelay(10);
+		ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+		ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+		E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+		E1000_WRITE_FLUSH(hw);
+	}
+
+	ret_val = e1000_get_auto_rd_done_generic(hw);
+	if (ret_val)
+		/* We don't want to continue accessing MAC registers. */
+		goto out;
+
+	/* Phy configuration from NVM just starts after EECD_AUTO_RD is set.
+	 * Need to wait for Phy configuration completion before accessing
+	 * NVM and Phy.
+	 */
+	if (hw->mac.type == e1000_82573)
+		msleep(25);
+
+	/* Clear any pending interrupt events. */
+	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+	icr = E1000_READ_REG(hw, E1000_ICR);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_hw_82571 - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation.
+ **/
+static s32
+e1000_init_hw_82571(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 reg_data;
+	s32 ret_val;
+	u16 i, rar_count = mac->rar_entry_count;
+
+	DEBUGFUNC("e1000_init_hw_82571");
+
+	e1000_initialize_hw_bits_82571(hw);
+
+	/* Initialize identification LED */
+	ret_val = e1000_id_led_init_generic(hw);
+	if (ret_val) {
+		DEBUGOUT("Error initializing identification LED\n");
+		goto out;
+	}
+
+	/* Disabling VLAN filtering */
+	DEBUGOUT("Initializing the IEEE VLAN\n");
+	e1000_clear_vfta(hw);
+
+	/* Setup the receive address. */
+	/* If, however, a locally administered address was assigned to the
+	 * 82571, we must reserve a RAR for it to work around an issue where
+	 * resetting one port will reload the MAC on the other port.
+	 */
+	if (e1000_get_laa_state_82571(hw) == TRUE)
+		rar_count--;
+	e1000_init_rx_addrs_generic(hw, rar_count);
+
+	/* Zero out the Multicast HASH table */
+	DEBUGOUT("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+	/* Setup link and flow control */
+	ret_val = e1000_setup_link(hw);
+
+	/* Set the transmit descriptor write-back policy */
+	reg_data = E1000_READ_REG(hw, E1000_TXDCTL);
+	reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+	           E1000_TXDCTL_FULL_TX_DESC_WB |
+	           E1000_TXDCTL_COUNT_DESC;
+	E1000_WRITE_REG(hw, E1000_TXDCTL, reg_data);
+
+	/* ...for both queues. */
+	if (mac->type != e1000_82573) {
+		reg_data = E1000_READ_REG(hw, E1000_TXDCTL1);
+		reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+		           E1000_TXDCTL_FULL_TX_DESC_WB |
+		           E1000_TXDCTL_COUNT_DESC;
+		E1000_WRITE_REG(hw, E1000_TXDCTL1, reg_data);
+	} else {
+		e1000_enable_tx_pkt_filtering(hw);
+		reg_data = E1000_READ_REG(hw, E1000_GCR);
+		reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+		E1000_WRITE_REG(hw, E1000_GCR, reg_data);
+	}
+
+	/* Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs_82571(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes required hardware-dependent bits needed for normal operation.
+ **/
+static void
+e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	DEBUGFUNC("e1000_initialize_hw_bits_82571");
+
+	if (hw->mac.disable_hw_init_bits)
+		goto out;
+
+	/* Transmit Descriptor Control 0 */
+	reg = E1000_READ_REG(hw, E1000_TXDCTL);
+	reg |= (1 << 22);
+	E1000_WRITE_REG(hw, E1000_TXDCTL, reg);
+
+	/* Transmit Descriptor Control 1 */
+	reg = E1000_READ_REG(hw, E1000_TXDCTL1);
+	reg |= (1 << 22);
+	E1000_WRITE_REG(hw, E1000_TXDCTL1, reg);
+
+	/* Transmit Arbitration Control 0 */
+	reg = E1000_READ_REG(hw, E1000_TARC0);
+	reg &= ~(0xF << 27); /* 30:27 */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
+		break;
+	default:
+		break;
+	}
+	E1000_WRITE_REG(hw, E1000_TARC0, reg);
+
+	/* Transmit Arbitration Control 1 */
+	reg = E1000_READ_REG(hw, E1000_TARC1);
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		reg &= ~((1 << 29) | (1 << 30));
+		reg |= (1 << 24) | (1 << 25) | (1 << 26);
+		if (E1000_READ_REG(hw, E1000_TCTL) & E1000_TCTL_MULR)
+			reg &= ~(1 << 28);
+		else
+			reg |= (1 << 28);
+		E1000_WRITE_REG(hw, E1000_TARC1, reg);
+		break;
+	default:
+		break;
+	}
+
+	/* Device Control */
+	if (hw->mac.type == e1000_82573) {
+		reg = E1000_READ_REG(hw, E1000_CTRL);
+		reg &= ~(1 << 29);
+		E1000_WRITE_REG(hw, E1000_CTRL, reg);
+	}
+
+	/* Extended Device Control */
+	if (hw->mac.type == e1000_82573) {
+		reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
+		reg &= ~(1 << 23);
+		reg |= (1 << 22);
+		E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
+	}
+
+out:
+	return;
+}
+
+/**
+ *  e1000_clear_vfta_82571 - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+static void
+e1000_clear_vfta_82571(struct e1000_hw *hw)
+{
+	u32 offset;
+	u32 vfta_value = 0;
+	u32 vfta_offset = 0;
+	u32 vfta_bit_in_reg = 0;
+
+	DEBUGFUNC("e1000_clear_vfta_82571");
+
+	if (hw->mac.type == e1000_82573) {
+		if (hw->mng_cookie.vlan_id != 0) {
+			/* The VFTA is a 4096b bit-field, each identifying
+			 * a single VLAN ID.  The following operations
+			 * determine which 32b entry (i.e. offset) into the
+			 * array we want to set the VLAN ID (i.e. bit) of
+			 * the manageability unit.
+			 */
+			vfta_offset = (hw->mng_cookie.vlan_id >>
+			               E1000_VFTA_ENTRY_SHIFT) &
+			              E1000_VFTA_ENTRY_MASK;
+			vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
+			                       E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+		}
+	}
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		/* If the offset we want to clear is the same offset of the
+		 * manageability VLAN ID, then clear all bits except that of
+		 * the manageability unit.
+		 */
+		vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
+		E1000_WRITE_FLUSH(hw);
+	}
+}
+
+/**
+ *  e1000_mc_addr_list_update_82571 - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *  @rar_used_count: the first RAR register free to program
+ *  @rar_count: total number of supported Receive Address Registers
+ *
+ *  Updates the Receive Address Registers and Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ *  The parameter rar_count will usually be hw->mac.rar_entry_count
+ *  unless there are workarounds that change this.
+ **/
+static void
+e1000_mc_addr_list_update_82571(struct e1000_hw *hw,
+                                u8 *mc_addr_list, u32 mc_addr_count,
+                                u32 rar_used_count, u32 rar_count)
+{
+	DEBUGFUNC("e1000_mc_addr_list_update_82571");
+
+	if (e1000_get_laa_state_82571(hw))
+		rar_count--;
+
+	e1000_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count,
+	                                  rar_used_count, rar_count);
+}
+
+/**
+ *  e1000_setup_link_82571 - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+static s32
+e1000_setup_link_82571(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_setup_link_82571");
+
+	/* 82573 does not have a word in the NVM to determine
+	 * the default flow control setting, so we explicitly
+	 * set it to full.
+	 */
+	if (hw->mac.type == e1000_82573)
+		hw->mac.fc = e1000_fc_full;
+
+	return e1000_setup_link_generic(hw);
+}
+
+/**
+ *  e1000_setup_copper_link_82571 - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the link for auto-neg or forced speed and duplex.  Then we check
+ *  for link, once link is established calls to configure collision distance
+ *  and flow control are called.
+ **/
+static s32
+e1000_setup_copper_link_82571(struct e1000_hw *hw)
+{
+	u32 ctrl, led_ctrl;
+	s32  ret_val;
+
+	DEBUGFUNC("e1000_setup_copper_link_82571");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+	switch (hw->phy.type) {
+	case e1000_phy_m88:
+		ret_val = e1000_copper_link_setup_m88(hw);
+		break;
+	case e1000_phy_igp_2:
+		ret_val = e1000_copper_link_setup_igp(hw);
+		/* Setup activity LED */
+		led_ctrl = E1000_READ_REG(hw, E1000_LEDCTL);
+		led_ctrl &= IGP_ACTIVITY_LED_MASK;
+		led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+		E1000_WRITE_REG(hw, E1000_LEDCTL, led_ctrl);
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_setup_copper_link_generic(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures collision distance and flow control for fiber and serdes links.
+ *  Upon successful setup, poll for link.
+ **/
+static s32
+e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_setup_fiber_serdes_link_82571");
+
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		/* If SerDes loopback mode is entered, there is no form
+		 * of reset to take the adapter out of that mode.  So we
+		 * have to explicitly take the adapter out of loopback
+		 * mode.  This prevents drivers from twidling their thumbs
+		 * if another tool failed to take it out of loopback mode.
+		 */
+		E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+		break;
+	default:
+		break;
+	}
+
+	return e1000_setup_fiber_serdes_link_generic(hw);
+}
+
+/**
+ *  e1000_valid_led_default_82571 - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32
+e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_valid_led_default_82571");
+
+	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		goto out;
+	}
+
+	if (hw->mac.type == e1000_82573 &&
+	    *data == ID_LED_RESERVED_F746)
+		*data = ID_LED_DEFAULT_82573;
+	else if (*data == ID_LED_RESERVED_0000 ||
+	         *data == ID_LED_RESERVED_FFFF)
+		*data = ID_LED_DEFAULT;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_laa_state_82571 - Get locally administered address state
+ *  @hw: pointer to the HW structure
+ *
+ *  Retrieve and return the current locally administed address state.
+ **/
+boolean_t
+e1000_get_laa_state_82571(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_82571 *dev_spec;
+	boolean_t state = FALSE;
+
+	DEBUGFUNC("e1000_get_laa_state_82571");
+
+	if (hw->mac.type != e1000_82571)
+		goto out;
+
+	dev_spec = (struct e1000_dev_spec_82571 *)hw->dev_spec;
+
+	state = dev_spec->laa_is_present;
+
+out:
+	return state;
+}
+
+/**
+ *  e1000_set_laa_state_82571 - Set locally administered address state
+ *  @hw: pointer to the HW structure
+ *  @state: enable/disable locally administered address
+ *
+ *  Enable/Disable the current locally administed address state.
+ **/
+void
+e1000_set_laa_state_82571(struct e1000_hw *hw, boolean_t state)
+{
+	struct e1000_dev_spec_82571 *dev_spec;
+
+	DEBUGFUNC("e1000_set_laa_state_82571");
+
+	if (hw->mac.type != e1000_82571)
+		goto out;
+
+	dev_spec = (struct e1000_dev_spec_82571 *)hw->dev_spec;
+
+	dev_spec->laa_is_present = state;
+
+	/* If workaround is activated... */
+	if (state == TRUE) {
+		/* Hold a copy of the LAA in RAR[14] This is done so that
+		 * between the time RAR[0] gets clobbered and the time it
+		 * gets fixed, the actual LAA is in one of the RARs and no
+		 * incoming packets directed to this port are dropped.
+		 * Eventually the LAA will be in RAR[0] and RAR[14].
+		 */
+		e1000_rar_set_generic(hw, hw->mac.addr,
+		                      hw->mac.rar_entry_count - 1);
+	}
+
+out:
+	return;
+}
+
+/**
+ *  e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Verifies that the EEPROM has completed the update.  After updating the
+ *  EEPROM, we need to check bit 15 in work 0x23 for the checksum fix.  If
+ *  the checksum fix is not implemented, we need to set the bit and update
+ *  the checksum.  Otherwise, if bit 15 is set and the checksum is incorrect,
+ *  we need to return bad checksum.
+ **/
+static s32
+e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32 ret_val = E1000_SUCCESS;
+	u16 data;
+
+	DEBUGFUNC("e1000_fix_nvm_checksum_82571");
+
+	if (nvm->type != e1000_nvm_flash_hw)
+		goto out;
+
+	/* Check bit 4 of word 10h.  If it is 0, firmware is done updating
+	 * 10h-12h.  Checksum may need to be fixed.
+	 */
+	ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
+	if (ret_val)
+		goto out;
+
+	if (!(data & 0x10)) {
+		/* Read 0x23 and check bit 15.  This bit is a 1
+		 * when the checksum has already been fixed.  If
+		 * the checksum is still wrong and this bit is a
+		 * 1, we need to return bad checksum.  Otherwise,
+		 * we need to set this bit to a 1 and update the
+		 * checksum.
+		 */
+		ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
+		if (ret_val)
+			goto out;
+
+		if (!(data & 0x8000)) {
+			data |= 0x8000;
+			ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
+			if (ret_val)
+				goto out;
+			ret_val = e1000_update_nvm_checksum(hw);
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the hardware counters by reading the counter registers.
+ **/
+static void
+e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
+{
+	volatile u32 temp;
+
+	DEBUGFUNC("e1000_clear_hw_cntrs_82571");
+
+	e1000_clear_hw_cntrs_base_generic(hw);
+
+	temp = E1000_READ_REG(hw, E1000_PRC64);
+	temp = E1000_READ_REG(hw, E1000_PRC127);
+	temp = E1000_READ_REG(hw, E1000_PRC255);
+	temp = E1000_READ_REG(hw, E1000_PRC511);
+	temp = E1000_READ_REG(hw, E1000_PRC1023);
+	temp = E1000_READ_REG(hw, E1000_PRC1522);
+	temp = E1000_READ_REG(hw, E1000_PTC64);
+	temp = E1000_READ_REG(hw, E1000_PTC127);
+	temp = E1000_READ_REG(hw, E1000_PTC255);
+	temp = E1000_READ_REG(hw, E1000_PTC511);
+	temp = E1000_READ_REG(hw, E1000_PTC1023);
+	temp = E1000_READ_REG(hw, E1000_PTC1522);
+
+	temp = E1000_READ_REG(hw, E1000_ALGNERRC);
+	temp = E1000_READ_REG(hw, E1000_RXERRC);
+	temp = E1000_READ_REG(hw, E1000_TNCRS);
+	temp = E1000_READ_REG(hw, E1000_CEXTERR);
+	temp = E1000_READ_REG(hw, E1000_TSCTC);
+	temp = E1000_READ_REG(hw, E1000_TSCTFC);
+
+	temp = E1000_READ_REG(hw, E1000_MGTPRC);
+	temp = E1000_READ_REG(hw, E1000_MGTPDC);
+	temp = E1000_READ_REG(hw, E1000_MGTPTC);
+
+	temp = E1000_READ_REG(hw, E1000_IAC);
+	temp = E1000_READ_REG(hw, E1000_ICRXOC);
+
+	temp = E1000_READ_REG(hw, E1000_ICRXPTC);
+	temp = E1000_READ_REG(hw, E1000_ICRXATC);
+	temp = E1000_READ_REG(hw, E1000_ICTXPTC);
+	temp = E1000_READ_REG(hw, E1000_ICTXATC);
+	temp = E1000_READ_REG(hw, E1000_ICTXQEC);
+	temp = E1000_READ_REG(hw, E1000_ICTXQMTC);
+	temp = E1000_READ_REG(hw, E1000_ICRXDMTC);
+}
diff --git a/drivers/net/e1000/e1000_82571.h b/drivers/net/e1000/e1000_82571.h
new file mode 100644
index 0000000..8aafd85
--- /dev/null
+++ b/drivers/net/e1000/e1000_82571.h
@@ -0,0 +1,42 @@
+/*******************************************************************************
+
+  Intel PRO/1000 Linux driver
+  Copyright(c) 1999 - 2007 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <[email-masked]>
+  e1000-devel Mailing List <[email-masked]>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_82571_H_
+#define _E1000_82571_H_
+
+#include "e1000_api.h"
+
+#define ID_LED_RESERVED_F746 0xF746
+#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
+                              (ID_LED_OFF1_ON2  <<  8) | \
+                              (ID_LED_DEF1_DEF2 <<  4) | \
+                              (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+
+#endif