Subject: [PATCH][netdrvr] lib8390: comment on locking by Alan Cox Re: 2.6.20->2.6.21 - networking dies after random time

From: Jarek Poplawski <[email-masked]>
Date: Thu, 26 Jul 2007 14:44:01 +0200

Hi,

Very below is my patch proposal with a comment, which in my opinion
is precious enough to save it for future help in reading and
understanding the code.

I hope Alan will not blame me I've not asked for his permission before
sending, and he would ack this patch as it is or at least most of this.

Thanks & regards,
Jarek P.

On Wed, Jul 25, 2007 at 03:46:56PM +0100, Alan Cox wrote:
> > > The code in question lib8390.c does
> > > 
> > > 	disable_irq();
> > > 	fiddle_with_the_network_card_hardware()
> > > 	enable_irq();
> > ...
> > > 
> > > No idea how this affects the network card, as the code there must be
> > > able to handle interrupts, which are not originated from the card due to
> > > interrupt sharing.
> > 
> > I think, in this last yesterday's patch Ingo could be right, yet!
> > The comment at the beginnig points this is done like that because
> > of chip's slowness. And problems with timing are mysterious.
> > 
> > On the other hand author of this code didn't use spin_lock_irqsave
> > for some reason, probably after testing this option too. So, I hope
> > this is the right path, but alas, I'm not sure this patch has to
> > prove this 100%.
> 
> The author (me) didn't use spin_lock_irqsave because the slowness of the
> card means that approach caused horrible problems like losing serial data
> at 38400 baud on some chips. Rememeber many 8390 nics on PCI were ISA
> chips with FPGA front ends.
> 
> > Anyway, in my opinion this situation where interrupts could/have_to
> > be used for such strange things should confirm the need of more
> > options for handling irqs individually.
> 
> Ok the logic behind the 8390 is very simple:
> 
> Things to know
> 	- IRQ delivery is asynchronous to the PCI bus
> 	- Blocking the local CPU IRQ via spin locks was too slow
> 	- The chip has register windows needing locking work
> 
> So the path was once (I say once as people appear to have changed it
> in the mean time and it now looks rather bogus if the changes to use
> disable_irq_nosync_irqsave are disabling the local IRQ)
> 
> 
> 	Take the page lock
> 	Mask the IRQ on chip
> 	Disable the IRQ (but not mask locally- someone seems to have
> 		broken this with the lock validator stuff)
> 		[This must be _nosync as the page lock may otherwise
> 			deadlock us]
> 	Drop the page lock and turn IRQs back on
> 	
> 	At this point an existing IRQ may still be running but we can't
> 	get a new one
> 
> 	Take the lock (so we know the IRQ has terminated) but don't mask
> the IRQs on the processor
> 	Set irqlock [for debug]
> 
> 	Transmit (slow as ****)
> 
> 	re-enable the IRQ
> 
> 
> We have to use disable_irq because otherwise you will get delayed
> interrupts on the APIC bus deadlocking the transmit path.
> 
> Quite hairy but the chip simply wasn't designed for SMP and you can't
> even ACK an interrupt without risking corrupting other parallel
> activities on the chip.
> 
> Alan
> 
------>

From: Jarek Poplawski <[email-masked]>

Subject: lib8390: comment on locking by Alan Cox

Additional explanation of problems with locking by Alan Cox.

Signed-off-by: Jarek Poplawski <[email-masked]>
Cc: Alan Cox <[email-masked]>
Cc: Paul Gortmaker <[email-masked]>
Cc: Jeff Garzik <[email-masked]>

---

diff -Nurp 2.6.23-rc1-/drivers/net/lib8390.c 2.6.23-rc1/drivers/net/lib8390.c
--- 2.6.23-rc1-/drivers/net/lib8390.c	2007-07-09 01:32:17.000000000 +0200
+++ 2.6.23-rc1/drivers/net/lib8390.c	2007-07-26 13:55:17.000000000 +0200
@@ -143,6 +143,52 @@ static void __NS8390_init(struct net_dev
  *	annoying the transmit function is called bh atomic. That places
  *	restrictions on the user context callers as disable_irq won't save
  *	them.
+ *
+ *	Additional explanation of problems with locking by Alan Cox:
+ *
+ *	"The author (me) didn't use spin_lock_irqsave because the slowness of the
+ *	card means that approach caused horrible problems like losing serial data
+ *	at 38400 baud on some chips. Rememeber many 8390 nics on PCI were ISA
+ *	chips with FPGA front ends.
+ *	
+ *	Ok the logic behind the 8390 is very simple:
+ *	
+ *	Things to know
+ *		- IRQ delivery is asynchronous to the PCI bus
+ *		- Blocking the local CPU IRQ via spin locks was too slow
+ *		- The chip has register windows needing locking work
+ *	
+ *	So the path was once (I say once as people appear to have changed it
+ *	in the mean time and it now looks rather bogus if the changes to use
+ *	disable_irq_nosync_irqsave are disabling the local IRQ)
+ *	
+ *	
+ *		Take the page lock
+ *		Mask the IRQ on chip
+ *		Disable the IRQ (but not mask locally- someone seems to have
+ *			broken this with the lock validator stuff)
+ *			[This must be _nosync as the page lock may otherwise
+ *				deadlock us]
+ *		Drop the page lock and turn IRQs back on
+ *		
+ *		At this point an existing IRQ may still be running but we can't
+ *		get a new one
+ *	
+ *		Take the lock (so we know the IRQ has terminated) but don't mask
+ *	the IRQs on the processor
+ *		Set irqlock [for debug]
+ *	
+ *		Transmit (slow as ****)
+ *	
+ *		re-enable the IRQ
+ *	
+ *	
+ *	We have to use disable_irq because otherwise you will get delayed
+ *	interrupts on the APIC bus deadlocking the transmit path.
+ *	
+ *	Quite hairy but the chip simply wasn't designed for SMP and you can't
+ *	even ACK an interrupt without risking corrupting other parallel
+ *	activities on the chip." [lkml, 25 Jul 2007]
  */