Subject: [PATCH 3/3] sky2: fix transmit state on resume

From: Stephen Hemminger <[email-masked]>
Date: Fri, 28 Sep 2007 09:48:14 -0700

After resume, driver has reset the chip so the current state
of transmit checksum offload state machine and DMA state machine
will be undefined.

The fix is to set the state so that first Tx will set MSS and offset
values.

Signed-off-by: Stephen Hemminger <[email-masked]>

--- a/drivers/net/sky2.c	2007-09-28 09:21:26.000000000 -0700
+++ b/drivers/net/sky2.c	2007-09-28 09:21:37.000000000 -0700
@@ -831,6 +831,20 @@ static inline struct sky2_tx_le *get_tx_
 	return le;
 }
 
+static void tx_init(struct sky2_port *sky2)
+{
+	struct sky2_tx_le *le;
+
+	sky2->tx_prod = sky2->tx_cons = 0;
+	sky2->tx_tcpsum = 0;
+	sky2->tx_last_mss = 0;
+
+	le = get_tx_le(sky2);
+	le->addr = 0;
+	le->opcode = OP_ADDR64 | HW_OWNER;
+	sky2->tx_addr64 = 0;
+}
+
 static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
 					    struct sky2_tx_le *le)
 {
@@ -1244,7 +1258,8 @@ static int sky2_up(struct net_device *de
 				GFP_KERNEL);
 	if (!sky2->tx_ring)
 		goto err_out;
-	sky2->tx_prod = sky2->tx_cons = 0;
+
+	tx_init(sky2);
 
 	sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
 					   &sky2->rx_le_map);

-- 
Stephen Hemminger <[email-masked]>